%patch
Index: linux-2.6.7/arch/ia64/kernel/cyclone.c
===================================================================
--- linux-2.6.7.orig/arch/ia64/kernel/cyclone.c
+++ linux-2.6.7/arch/ia64/kernel/cyclone.c
@@ -16,62 +16,10 @@
 	return 1;
 }
 
-static u32* volatile cyclone_timer;	/* Cyclone MPMC0 register */
-static u32 last_update_cyclone;
-
-static unsigned long offset_base;
-
-static unsigned long get_offset_cyclone(void)
-{
-	u32 now;
-	unsigned long offset;
-
-	/* Read the cyclone timer */
-	now = readl(cyclone_timer);
-	/* .. relative to previous update*/
-	offset = now - last_update_cyclone;
-
-	/* convert cyclone ticks to nanoseconds */
-	offset = (offset*NSEC_PER_SEC)/CYCLONE_TIMER_FREQ;
-
-	/* our adjusted time in nanoseconds */
-	return offset_base + offset;
-}
-
-static void update_cyclone(long delta_nsec)
-{
-	u32 now;
-	unsigned long offset;
-
-	/* Read the cyclone timer */
-	now = readl(cyclone_timer);
-	/* .. relative to previous update*/
-	offset = now - last_update_cyclone;
-
-	/* convert cyclone ticks to nanoseconds */
-	offset = (offset*NSEC_PER_SEC)/CYCLONE_TIMER_FREQ;
-
-	offset += offset_base;
-
-	/* Be careful about signed/unsigned comparisons here: */
-	if (delta_nsec < 0 || (unsigned long) delta_nsec < offset)
-		offset_base = offset - delta_nsec;
-	else
-		offset_base = 0;
-
-	last_update_cyclone = now;
-}
-
-static void reset_cyclone(void)
-{
-	offset_base = 0;
-	last_update_cyclone = readl(cyclone_timer);
-}
 
 struct time_interpolator cyclone_interpolator = {
-	.get_offset =	get_offset_cyclone,
-	.update =	update_cyclone,
-	.reset =	reset_cyclone,
+	.source = TIME_SOURCE_MEM32,
+	.shift = 32,
 	.frequency =	CYCLONE_TIMER_FREQ,
 	.drift =	-100,
 };
@@ -82,6 +30,7 @@
 	u64 base;	/* saved cyclone base address */
 	u64 offset;	/* offset from pageaddr to cyclone_timer register */
 	int i;
+	u32* volatile cyclone_timer;	/* Cyclone MPMC0 register */
 
 	if (!use_cyclone)
 		return -ENODEV;
@@ -149,7 +98,7 @@
 		}
 	}
 	/* initialize last tick */
-	last_update_cyclone = readl(cyclone_timer);
+	cyclone_interpolator.addr=cyclone_timer;
 	register_time_interpolator(&cyclone_interpolator);
 
 	return 0;
Index: linux-2.6.7/arch/ia64/kernel/fsys.S
===================================================================
--- linux-2.6.7.orig/arch/ia64/kernel/fsys.S
+++ linux-2.6.7/arch/ia64/kernel/fsys.S
@@ -143,186 +143,6 @@
 	FSYS_RETURN
 END(fsys_set_tid_address)
 
-/*
- * Note 1: This routine uses floating-point registers, but only with registers that
- *	   operate on integers.  Because of that, we don't need to set ar.fpsr to the
- *	   kernel default value.
- *
- * Note 2: For now, we will assume that all CPUs run at the same clock-frequency.
- *	   If that wasn't the case, we would have to disable preemption (e.g.,
- *	   by disabling interrupts) between reading the ITC and reading
- *	   local_cpu_data->nsec_per_cyc.
- *
- * Note 3: On platforms where the ITC-drift bit is set in the SAL feature vector,
- *	   we ought to either skip the ITC-based interpolation or run an ntp-like
- *	   daemon to keep the ITCs from drifting too far apart.
- */
-
-ENTRY(fsys_gettimeofday)
-	.prologue
-	.altrp b6
-	.body
-	add r9=TI_FLAGS+IA64_TASK_SIZE,r16
-	addl r3=THIS_CPU(cpu_info),r0
-
-	mov.m r31=ar.itc		// put time stamp into r31 (ITC) == now		(35 cyc)
-#ifdef CONFIG_SMP
-	movl r10=__per_cpu_offset
-	movl r2=sal_platform_features
-	;;
-
-	ld8 r2=[r2]
-	movl r19=xtime			// xtime is a timespec struct
-
-	ld8 r10=[r10]			// r10 <- __per_cpu_offset[0]
-	addl r21=THIS_CPU(cpu_info),r0
-	;;
-	add r10=r21, r10		// r10 <- &cpu_data(time_keeper_id)
-	tbit.nz p8,p0 = r2, IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT_BIT
-(p8)	br.spnt.many fsys_fallback_syscall
-#else
-	;;
-	mov r10=r3
-	movl r19=xtime			// xtime is a timespec struct
-#endif
-	ld4 r9=[r9]
-	movl r17=xtime_lock
-	;;
-
-	// r32, r33 should contain the 2 args of gettimeofday
-	adds r21=IA64_CPUINFO_ITM_NEXT_OFFSET, r10
-	mov r2=-1
-	tnat.nz p6,p7=r32		// guard against NaT args
-	;;
-
-	adds r10=IA64_CPUINFO_ITM_DELTA_OFFSET, r10
-(p7)	tnat.nz p6,p0=r33
-(p6)	br.cond.spnt.few .fail_einval
-
-	adds r8=IA64_CPUINFO_NSEC_PER_CYC_OFFSET, r3
-	movl r24=2361183241434822607	// for division hack (only for / 1000)
-	;;
-
-	ldf8 f7=[r10]			// f7 now contains itm_delta
-	setf.sig f11=r2
-	adds r10=8, r32
-
-	adds r20=IA64_TIMESPEC_TV_NSEC_OFFSET, r19	// r20 = &xtime->tv_nsec
-	movl r26=jiffies
-
-	setf.sig f9=r24			// f9 is used for division hack
-	movl r27=wall_jiffies
-
-	and r9=TIF_ALLWORK_MASK,r9
-	movl r25=last_nsec_offset
-	;;
-
-	/*
-	 * Verify that we have permission to write to struct timeval.  Note:
-	 * Another thread might unmap the mapping before we actually get
-	 * to store the result.  That's OK as long as the stores are also
-	 * protect by EX().
-	 */
-EX(.fail_efault, probe.w.fault r32, 3)		// this must come _after_ NaT-check
-EX(.fail_efault, probe.w.fault r10, 3)		// this must come _after_ NaT-check
-	nop 0
-
-	ldf8 f10=[r8]			// f10 <- local_cpu_data->nsec_per_cyc value
-	cmp.ne p8, p0=0, r9
-(p8)	br.spnt.many fsys_fallback_syscall
-	;;
-.retry:	// *** seq = read_seqbegin(&xtime_lock); ***
-	ld4.acq r23=[r17]		// since &xtime_lock == &xtime_lock->sequence
-	ld8 r14=[r25]			// r14 (old) = last_nsec_offset
-
-	ld8 r28=[r26]			// r28 = jiffies
-	ld8 r29=[r27]			// r29 = wall_jiffies
-	;;
-
-	ldf8 f8=[r21]			// f8 now contains itm_next
-	sub r28=r29, r28, 1		// r28 now contains "-(lost + 1)"
-	tbit.nz p9, p10=r23, 0		// p9 <- is_odd(r23), p10 <- is_even(r23)
-	;;
-
-	ld8 r2=[r19]			// r2 = sec = xtime.tv_sec
-	ld8 r29=[r20]			// r29 = nsec = xtime.tv_nsec
-
-	setf.sig f6=r28			// f6 <- -(lost + 1)				(6 cyc)
-	;;
-
-	mf
-	xma.l f8=f6, f7, f8	// f8 (last_tick) <- -(lost + 1)*itm_delta + itm_next	(5 cyc)
-	nop 0
-
-	setf.sig f12=r31		// f12 <- ITC					(6 cyc)
-	// *** if (unlikely(read_seqretry(&xtime_lock, seq))) continue; ***
-	ld4 r24=[r17]			// r24 = xtime_lock->sequence (re-read)
-	nop 0
-	;;
-
-	mov r31=ar.itc			// re-read ITC in case we .retry		(35 cyc)
-	xma.l f8=f11, f8, f12	// f8 (elapsed_cycles) <- (-1*last_tick + now) = (now - last_tick)
-	nop 0
-	;;
-
-	getf.sig r18=f8			// r18 <- (now - last_tick)
-	xmpy.l f8=f8, f10		// f8 <- elapsed_cycles*nsec_per_cyc (5 cyc)
-	add r3=r29, r14			// r3 = (nsec + old)
-	;;
-
-	cmp.lt p7, p8=r18, r0		// if now < last_tick, set p7 = 1, p8 = 0
-	getf.sig r18=f8			// r18 = elapsed_cycles*nsec_per_cyc		(6 cyc)
-	nop 0
-	;;
-
-(p10)	cmp.ne p9, p0=r23, r24		// if xtime_lock->sequence != seq, set p9
-	shr.u r18=r18, IA64_NSEC_PER_CYC_SHIFT	// r18 <- offset
-(p9)	br.spnt.many .retry
-	;;
-
-	mov ar.ccv=r14			// ar.ccv = old					(1 cyc)
-	cmp.leu p7, p8=r18, r14		// if (offset <= old), set p7 = 1, p8 = 0
-	;;
-
-(p8)	cmpxchg8.rel r24=[r25], r18, ar.ccv	// compare-and-exchange (atomic!)
-(p8)	add r3=r29, r18			// r3 = (nsec + offset)
-	;;
-	shr.u r3=r3, 3			// initiate dividing r3 by 1000
-	;;
-	setf.sig f8=r3			//						(6 cyc)
-	mov r10=1000000			// r10 = 1000000
-	;;
-(p8)	cmp.ne.unc p9, p0=r24, r14
-	xmpy.hu f6=f8, f9		//						(5 cyc)
-(p9)	br.spnt.many .retry
-	;;
-
-	getf.sig r3=f6			//						(6 cyc)
-	;;
-	shr.u r3=r3, 4			// end of division, r3 is divided by 1000 (=usec)
-	;;
-
-1:	cmp.geu p7, p0=r3, r10		// while (usec >= 1000000)
-	;;
-(p7)	sub r3=r3, r10			// usec -= 1000000
-(p7)	adds r2=1, r2			// ++sec
-(p7)	br.spnt.many 1b
-
-	// finally: r2 = sec, r3 = usec
-EX(.fail_efault, st8 [r32]=r2)
-	adds r9=8, r32
-	mov r8=r0			// success
-	;;
-EX(.fail_efault, st8 [r9]=r3)		// store them in the timeval struct
-	mov r10=0
-	FSYS_RETURN
-	/*
-	 * Note: We are NOT clearing the scratch registers here.  Since the only things
-	 *	 in those registers are time-related variables and some addresses (which
-	 *	 can be obtained from System.map), none of this should be security-sensitive
-	 *	 and we should be fine.
-	 */
-
 .fail_einval:
 	mov r8=EINVAL			// r8 = EINVAL
 	mov r10=-1			// r10 = -1
@@ -332,7 +152,6 @@
 	mov r8=EFAULT			// r8 = EFAULT
 	mov r10=-1			// r10 = -1
 	FSYS_RETURN
-END(fsys_gettimeofday)
 
 /*
  * long fsys_rt_sigprocmask (int how, sigset_t *set, sigset_t *oset, size_t sigsetsize).
@@ -672,7 +491,7 @@
 	data8 0				// setrlimit
 	data8 0				// getrlimit		// 1085
 	data8 0				// getrusage
-	data8 fsys_gettimeofday		// gettimeofday
+	data8 0 			// gettimeofday
 	data8 0				// settimeofday
 	data8 0				// select
 	data8 0				// poll			// 1090
Index: linux-2.6.7/arch/ia64/kernel/time.c
===================================================================
--- linux-2.6.7.orig/arch/ia64/kernel/time.c
+++ linux-2.6.7/arch/ia64/kernel/time.c
@@ -45,46 +45,44 @@
 
 #endif
 
-static void
-itc_reset (void)
-{
-}
-
+#ifdef SMP
 /*
- * Adjust for the fact that xtime has been advanced by delta_nsec (may be negative and/or
- * larger than NSEC_PER_SEC.
+ * Return the value of the CPU ITC timer making sure
+ * that time never runs backward. ITCs may not be fully synchronized
+ * on SMP systems which may result in time seemingly running backward.
  */
-static void
-itc_update (long delta_nsec)
+unsigned long get_itc_counter(void)
 {
+	static unsigned long last_itc=0;
+	unsigned long litc;
+
+	/* Determine ITC value that is >= than the last one used */
+	do {
+		litc=last_itc;
+		now = ia64_get_itc();
+	
+		/* Make sure time does not run backwards */
+		if (litc && time_after(litc,now))
+		{
+			/* Time would be running backwards if we would use this ITC value.
+			 * Use the last ITC value instead.
+			 */
+			now=litc;
+			break;
+		}
+	} while (unlikely(cmpxchg(&last_itc,litc,now)!=litc));
+	
+	return now;
 }
 
-/*
- * Return the number of nano-seconds that elapsed since the last
- * update to jiffy.  It is quite possible that the timer interrupt
- * will interrupt this and result in a race for any of jiffies,
- * wall_jiffies or itm_next.  Thus, the xtime_lock must be at least
- * read synchronised when calling this routine (see do_gettimeofday()
- * below for an example).
- */
-unsigned long
-itc_get_offset (void)
+#else
+unsigned long get_itc_counter(void)
 {
-	unsigned long elapsed_cycles, lost = jiffies - wall_jiffies;
-	unsigned long now = ia64_get_itc(), last_tick;
-
-	last_tick = (cpu_data(TIME_KEEPER_ID)->itm_next
-		     - (lost + 1)*cpu_data(TIME_KEEPER_ID)->itm_delta);
-
-	elapsed_cycles = now - last_tick;
-	return (elapsed_cycles*local_cpu_data->nsec_per_cyc) >> IA64_NSEC_PER_CYC_SHIFT;
+	return ia64_get_itc();
 }
+#endif
 
-static struct time_interpolator itc_interpolator = {
-	.get_offset =	itc_get_offset,
-	.update =	itc_update,
-	.reset =	itc_reset
-};
+static struct time_interpolator itc_interpolator;
 
 int
 do_settimeofday (struct timespec *tv)
@@ -127,53 +125,16 @@
 void
 do_gettimeofday (struct timeval *tv)
 {
-	unsigned long seq, nsec, usec, sec, old, offset;
+	unsigned long seq, nsec, usec, sec, offset;
 
-	while (1) {
+	do { 
 		seq = read_seqbegin(&xtime_lock);
-		{
-			old = last_nsec_offset;
-			offset = time_interpolator_get_offset();
-			sec = xtime.tv_sec;
-			nsec = xtime.tv_nsec;
-		}
-		if (unlikely(read_seqretry(&xtime_lock, seq)))
-			continue;
-		/*
-		 * Ensure that for any pair of causally ordered gettimeofday() calls, time
-		 * never goes backwards (even when ITC on different CPUs are not perfectly
-		 * synchronized).  (A pair of concurrent calls to gettimeofday() is by
-		 * definition non-causal and hence it makes no sense to talk about
-		 * time-continuity for such calls.)
-		 *
-		 * Doing this in a lock-free and race-free manner is tricky.  Here is why
-		 * it works (most of the time): read_seqretry() just succeeded, which
-		 * implies we calculated a consistent (valid) value for "offset".  If the
-		 * cmpxchg() below succeeds, we further know that last_nsec_offset still
-		 * has the same value as at the beginning of the loop, so there was
-		 * presumably no timer-tick or other updates to last_nsec_offset in the
-		 * meantime.  This isn't 100% true though: there _is_ a possibility of a
-		 * timer-tick occurring right right after read_seqretry() and then getting
-		 * zero or more other readers which will set last_nsec_offset to the same
-		 * value as the one we read at the beginning of the loop.  If this
-		 * happens, we'll end up returning a slightly newer time than we ought to
-		 * (the jump forward is at most "offset" nano-seconds).  There is no
-		 * danger of causing time to go backwards, though, so we are safe in that
-		 * sense.  We could make the probability of this unlucky case occurring
-		 * arbitrarily small by encoding a version number in last_nsec_offset, but
-		 * even without versioning, the probability of this unlucky case should be
-		 * so small that we won't worry about it.
-		 */
-		if (offset <= old) {
-			offset = old;
-			break;
-		} else if (likely(cmpxchg(&last_nsec_offset, old, offset) == old))
-			break;
-
-		/* someone else beat us to updating last_nsec_offset; try again */
-	}
+		offset = time_interpolator_get_offset();
+		sec = xtime.tv_sec;
+		nsec = xtime.tv_nsec;
+	} while (unlikely(read_seqretry(&xtime_lock, seq)));
 
-	usec = (nsec + offset) / 1000;
+       	usec = (nsec + offset) / 1000;
 
 	while (unlikely(usec >= USEC_PER_SEC)) {
 		usec -= USEC_PER_SEC;
@@ -385,7 +346,10 @@
 
 	if (!(sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)) {
 		itc_interpolator.frequency = local_cpu_data->itc_freq;
+		itc_interpolator.shift=5;
 		itc_interpolator.drift = itc_drift;
+		itc_interpolator.source= TIME_SOURCE_FUNCTION;
+		itc_interpolator.addr = get_itc_counter;
 		register_time_interpolator(&itc_interpolator);
 	}
 
Index: linux-2.6.7/arch/ia64/sn/kernel/sn2/timer.c
===================================================================
--- linux-2.6.7.orig/arch/ia64/sn/kernel/sn2/timer.c
+++ linux-2.6.7/arch/ia64/sn/kernel/sn2/timer.c
@@ -20,57 +20,16 @@
 
 
 extern unsigned long sn_rtc_cycles_per_second;
-static volatile unsigned long last_wall_rtc;
 
-static unsigned long rtc_offset;	/* updated only when xtime write-lock is held! */
-static long rtc_nsecs_per_cycle;
-static long rtc_per_timer_tick;
-
-static unsigned long
-getoffset(void)
-{
-	return rtc_offset + (GET_RTC_COUNTER() - last_wall_rtc)*rtc_nsecs_per_cycle;
-}
-
-
-static void
-update(long delta_nsec)
-{
-	unsigned long rtc_counter = GET_RTC_COUNTER();
-	unsigned long offset = rtc_offset + (rtc_counter - last_wall_rtc)*rtc_nsecs_per_cycle;
-
-	/* Be careful about signed/unsigned comparisons here: */
-	if (delta_nsec < 0 || (unsigned long) delta_nsec < offset)
-		rtc_offset = offset - delta_nsec;
-	else
-		rtc_offset = 0;
-	last_wall_rtc = rtc_counter;
-}
-
-
-static void
-reset(void)
-{
-	rtc_offset = 0;
-	last_wall_rtc = GET_RTC_COUNTER();
-}
-
-
-static struct time_interpolator sn2_interpolator = {
-	.get_offset =	getoffset,
-	.update =	update,
-	.reset =	reset
-};
+static struct time_interpolator sn2_interpolator;
 
 void __init
 sn_timer_init(void)
 {
 	sn2_interpolator.frequency = sn_rtc_cycles_per_second;
 	sn2_interpolator.drift = -1;	/* unknown */
+	sn2_interpolator.shift = 0;	/* RTC is 54 bits maximum shift is 10 */
+	sn2_interpolator.addr=RTC_COUNTER_ADDR;
+	sn2_interpolator.source=TIME_SOURCE_MEM64;
 	register_time_interpolator(&sn2_interpolator);
-
-	rtc_per_timer_tick = sn_rtc_cycles_per_second / HZ;
-	rtc_nsecs_per_cycle = 1000000000 / sn_rtc_cycles_per_second;
-
-	last_wall_rtc = GET_RTC_COUNTER();
 }
Index: linux-2.6.7/include/linux/timex.h
===================================================================
--- linux-2.6.7.orig/include/linux/timex.h
+++ linux-2.6.7/include/linux/timex.h
@@ -320,92 +320,107 @@
 
 #ifdef CONFIG_TIME_INTERPOLATION
 
-struct time_interpolator {
-	/* cache-hot stuff first: */
-	unsigned long (*get_offset) (void);
-	void (*update) (long);
-	void (*reset) (void);
+#ifdef CPU_TIMER
+#define TIME_SOURCE_CPU 0
+#endif
+#define TIME_SOURCE_MEM64 1
+#define TIME_SOURCE_MEM32 2
+#define TIME_SOURCE_FUNCTION 3
 
-	/* cache-cold stuff follows here: */
-	struct time_interpolator *next;
+struct time_interpolator {
+	unsigned short source;		/* the type of time source */
+	unsigned short shift;		/* Increases accuracy by shifting. Note that bits may be lost if this is set too high */
+	unsigned nsec_per_cyc;		/* calculated by register_time_interpolator */
+	void *addr;			/* Address if this is a counter with a memory address or function */
 	unsigned long frequency;	/* frequency in counts/second */
 	long drift;			/* drift in parts-per-million (or -1) */
+	struct time_interpolator *next;
 };
 
-extern volatile unsigned long last_nsec_offset;
-#ifndef __HAVE_ARCH_CMPXCHG
-extern spin_lock_t last_nsec_offset_lock;
-#endif
 extern struct time_interpolator *time_interpolator;
 
-extern void register_time_interpolator(struct time_interpolator *);
-extern void unregister_time_interpolator(struct time_interpolator *);
-
-/* Called with xtime WRITE-lock acquired.  */
-static inline void
-time_interpolator_update(long delta_nsec)
+static inline unsigned long
+time_interpolator_get_counter(void)
 {
-	struct time_interpolator *ti = time_interpolator;
+	unsigned long (*x)(void);
 
-	if (last_nsec_offset > 0) {
-#ifdef __HAVE_ARCH_CMPXCHG
-		unsigned long new, old;
-
-		do {
-			old = last_nsec_offset;
-			if (old > delta_nsec)
-				new = old - delta_nsec;
-			else
-				new = 0;
-		} while (cmpxchg(&last_nsec_offset, old, new) != old);
+	switch (time_interpolator->source)
+	{
+		case TIME_SOURCE_FUNCTION: 
+			x=time_interpolator->addr;
+			return x();
+
+		case TIME_SOURCE_MEM64	: return *((u64 *)time_interpolator->addr);
+		case TIME_SOURCE_MEM32	: return *((u32 *)time_interpolator->addr);
+#ifdef CPU_TIMER		
+		default: return CPU_TIMER;
 #else
-		/*
-		 * This really hurts, because it serializes gettimeofday(), but without an
-		 * atomic single-word compare-and-exchange, there isn't all that much else
-		 * we can do.
-		 */
-		spin_lock(&last_nsec_offset_lock);
-		{
-			last_nsec_offset -= min(last_nsec_offset, delta_nsec);
-		}
-		spin_unlock(&last_nsec_offset_lock);
+		default: return 0;
 #endif
 	}
-
-	if (ti)
-		(*ti->update)(delta_nsec);
 }
 
-/* Called with xtime WRITE-lock acquired.  */
+/* Offset from last_counter in nsecs */
+extern unsigned long time_interpolator_offset;
+
+/* Counter value in units of the counter */
+extern unsigned long time_interpolator_last_counter;
+
+extern void register_time_interpolator(struct time_interpolator *);
+extern void unregister_time_interpolator(struct time_interpolator *);
+
 static inline void
 time_interpolator_reset(void)
 {
-	struct time_interpolator *ti = time_interpolator;
-
-	last_nsec_offset = 0;
-	if (ti)
-		(*ti->reset)();
+	time_interpolator_offset=0;
+	time_interpolator_last_counter=time_interpolator_get_counter();
 }
 
-/* Called with xtime READ-lock acquired.  */
 static inline unsigned long
 time_interpolator_get_offset(void)
 {
-	struct time_interpolator *ti = time_interpolator;
-	if (ti)
-		return (*ti->get_offset)();
-	return last_nsec_offset;
+	return time_interpolator_offset+
+		(
+			((time_interpolator_get_counter()-time_interpolator_last_counter)*time_interpolator->nsec_per_cyc)
+			>>time_interpolator->shift
+		);
+} 
+
+static inline void time_interpolator_update(long delta_nsec)
+{
+	unsigned long counter=time_interpolator_get_counter();
+	unsigned long offset=time_interpolator_offset + (((counter-time_interpolator_last_counter)*time_interpolator->nsec_per_cyc)>>time_interpolator->shift);
+	
+	/* Traditional mysterious code piece for time interpolators.
+	   If the correction forward would result in a negative offset then the offset is reset to zero
+	   thereby providing a means for synchronization. This will occur because
+	     1. The scaling factor has been calculated in such a way as
+		to insure that the time interpolator runs SLOWER than real time.
+		Timer interrupts on time will therefore reset the time interpolator in regular
+		intervals. A late timer interrupt will leave the offset running.
+		(this may lead to a minimal time jump forward before a tick but insures
+		that time never goes backward)
+	     2. warp_clock and leap seconds since the delta_nsec specified
+		in these situations is far too large.
+	     3. After the interpolator initialization when the first call to time_interpolator_update
+		by the timer code occurs which will invariably specify a delta that is too large.
+	*/
+	if (delta_nsec < 0 || (unsigned long) delta_nsec < offset)
+		time_interpolator_offset = offset - delta_nsec;
+	else
+		time_interpolator_offset = 0;
+	time_interpolator_last_counter=counter;
 }
 
 #else /* !CONFIG_TIME_INTERPOLATION */
 
 static inline void
-time_interpolator_update(long delta_nsec)
+time_interpolator_reset(void)
 {
 }
 
 static inline void
-time_interpolator_reset(void)
+time_interpolator_update(long delta_nsec)
 {
 }
 
Index: linux-2.6.7/kernel/timer.c
===================================================================
--- linux-2.6.7.orig/kernel/timer.c
+++ linux-2.6.7/kernel/timer.c
@@ -1241,8 +1241,7 @@
 		 * too.
 		 */
 
-		do_gettimeofday((struct timeval *)&tp);
-		tp.tv_nsec *= NSEC_PER_USEC;
+		getnstimeofday(&tp);
 		tp.tv_sec += wall_to_monotonic.tv_sec;
 		tp.tv_nsec += wall_to_monotonic.tv_nsec;
 		if (tp.tv_nsec - NSEC_PER_SEC >= 0) {
@@ -1426,14 +1425,12 @@
 }
 
 #ifdef CONFIG_TIME_INTERPOLATION
-volatile unsigned long last_nsec_offset;
-#ifndef __HAVE_ARCH_CMPXCHG
-spinlock_t last_nsec_offset_lock = SPIN_LOCK_UNLOCKED;
-#endif
 
 struct time_interpolator *time_interpolator;
 static struct time_interpolator *time_interpolator_list;
 static spinlock_t time_interpolator_lock = SPIN_LOCK_UNLOCKED;
+unsigned long time_interpolator_offset;
+unsigned long time_interpolator_last_counter;
 
 static inline int
 is_better_time_interpolator(struct time_interpolator *new)
@@ -1447,10 +1444,18 @@
 void
 register_time_interpolator(struct time_interpolator *ti)
 {
+	/* Must not round up. The interpolator update code relies on offsets
+	   being calculated too short so that a resync can take place once in a while
+	   ti->nsec_per_cyc=((NSEC_PER_SEC<<ti->shift)+ti->frequency/2)/ti->frequency;
+	*/
+	ti->nsec_per_cyc=(NSEC_PER_SEC<<ti->shift)/ti->frequency;
 	spin_lock(&time_interpolator_lock);
 	write_seqlock_irq(&xtime_lock);
 	if (is_better_time_interpolator(ti))
+	{
 		time_interpolator = ti;
+		time_interpolator_reset();
+	}
 	write_sequnlock_irq(&xtime_lock);
 
 	ti->next = time_interpolator_list;
@@ -1481,6 +1486,7 @@
 		for (curr = time_interpolator_list; curr; curr = curr->next)
 			if (is_better_time_interpolator(curr))
 				time_interpolator = curr;
+		time_interpolator_reset();
 	}
 	write_sequnlock_irq(&xtime_lock);
 	spin_unlock(&time_interpolator_lock);
Index: linux-2.6.7/kernel/posix-timers.c
===================================================================
--- linux-2.6.7.orig/kernel/posix-timers.c
+++ linux-2.6.7/kernel/posix-timers.c
@@ -1015,15 +1015,10 @@
  */
 static int do_posix_gettime(struct k_clock *clock, struct timespec *tp)
 {
-	struct timeval tv;
-
 	if (clock->clock_get)
 		return clock->clock_get(tp);
 
-	do_gettimeofday(&tv);
-	tp->tv_sec = tv.tv_sec;
-	tp->tv_nsec = tv.tv_usec * NSEC_PER_USEC;
-
+	getnstimeofday(tp);
 	return 0;
 }
 
@@ -1039,24 +1034,16 @@
 	struct timespec *tp, struct timespec *mo)
 {
 	u64 jiff;
-	struct timeval tpv;
 	unsigned int seq;
 
 	do {
 		seq = read_seqbegin(&xtime_lock);
-		do_gettimeofday(&tpv);
+		getnstimeofday(mo);
 		*mo = wall_to_monotonic;
 		jiff = jiffies_64;
 
 	} while(read_seqretry(&xtime_lock, seq));
 
-	/*
-	 * Love to get this before it is converted to usec.
-	 * It would save a div AND a mpy.
-	 */
-	tp->tv_sec = tpv.tv_sec;
-	tp->tv_nsec = tpv.tv_usec * NSEC_PER_USEC;
-
 	return jiff;
 }
 
Index: linux-2.6.7/include/asm-ia64/timex.h
===================================================================
--- linux-2.6.7.orig/include/asm-ia64/timex.h
+++ linux-2.6.7/include/asm-ia64/timex.h
@@ -8,6 +8,7 @@
 /*
  * 2001/01/18 davidm	Removed CLOCK_TICK_RATE.  It makes no sense on IA-64.
  *			Also removed cacheflush_time as it's entirely unused.
+ * 2004/07/03 clameter	Define CPU_TIMER
  */
 
 #include <asm/intrinsics.h>
@@ -27,6 +28,7 @@
  * 100MHz.
  */
 #define CLOCK_TICK_RATE		(HZ * 100000UL)
+#define CPU_TIMER ia64_getreg(_IA64_REG_AR_ITC)
 
 static inline cycles_t
 get_cycles (void)
Index: linux-2.6.7/include/linux/time.h
===================================================================
--- linux-2.6.7.orig/include/linux/time.h
+++ linux-2.6.7/include/linux/time.h
@@ -348,6 +348,7 @@
 struct itimerval;
 extern int do_setitimer(int which, struct itimerval *value, struct itimerval *ovalue);
 extern int do_getitimer(int which, struct itimerval *value);
+extern void getnstimeofday (struct timespec *tv);
 
 static inline void
 set_normalized_timespec (struct timespec *ts, time_t sec, long nsec)
Index: linux-2.6.7/kernel/time.c
===================================================================
--- linux-2.6.7.orig/kernel/time.c
+++ linux-2.6.7/kernel/time.c
@@ -421,6 +421,51 @@
 
 EXPORT_SYMBOL(current_kernel_time);
 
+#ifdef TIME_INTERPOLATION
+void getnstimeofday (struct timespec *tv)
+{
+        unsigned long seq;
+
+        do {
+                seq = read_seqbegin(&xtime_lock);
+                tv->tv_sec = xtime.tv_sec;
+                tv->tv_nsec = xtime.tv_nsec+time_interpolator_get_offset();
+        } while (unlikely(read_seqretry(&xtime_lock, seq)));
+
+        while (unlikely(tv->tv_nsec >= NSEC_PER_SEC)) {
+                tv->tv_nsec -= NSEC_PER_SEC;
+                ++tv->tv_sec;
+        }
+}
+
+#if 0 
+void do_gettimeofday(struct timeval *x)
+{
+	struct timespec tv;
+	getnstimeofday(&ns);
+	x->tv_sec=tv.tv_sec;
+	x->tv_usec=(tv.tv_nsec+NSEC_PER_USEC/2)/ NSEC_PER_USEC;
+}
+#endif
+
+EXPORT_SYMBOL(do_gettimeofday);
+
+#else
+/*
+ * Simulate getnstimeofday using gettimeofday. This will only yield usec accuracy
+ */
+void getnstimeofday(struct timespec *tv)
+{
+	struct timeval x;
+
+	do_gettimeofday(&x);
+	tv->tv_sec = x.tv_sec;
+	tv->tv_nsec = x.tv_usec*NSEC_PER_USEC;
+}
+
+EXPORT_SYMBOL(getnstimeofday);
+#endif
+
 #if (BITS_PER_LONG < 64)
 u64 get_jiffies_64(void)
 {