# #-#-#-#-#  old (zypper)  #-#-#-#-#
# Copyright (C) 2006 SuSE Linux Products GmbH, Nuernberg
# This file is distributed under the same license as the package.
#
# Ray Chen <swyear@opensuse.org>, 2016.
# #-#-#-#-#  new (zypper)  #-#-#-#-#
# translation of zypper.po to
# @TITLE@
# Copyright (C) 2006, SUSE Linux GmbH, Nuremberg
#
# This file is distributed under the same license as @PACKAGE@ package. FIRST
#
# swyear <swyear@gmail.com>, 2008, 2009.
# Angus J.F. Lai <jingfu.lai@gmail.com>, 2009.
# Ray Chen <swyear@opensuse.org>, 2009, 2011, 2012, 2013.
# Ramax Lo <ramaxlo@gmail.com>, 2014, 2015.
#, fuzzy
msgid ""
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"Project-Id-Version: zypper\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2015-11-05 01:15+0100\n"
"PO-Revision-Date: 2016-04-27 12:01+0800\n"
"Last-Translator: Ray Chen <swyear@opensuse.org>\n"
"Language-Team: Chinese <kde-i18n-doc@kde.org>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=n != 1;\n"
"X-Generator: Lokalize 2.0\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"Project-Id-Version: zypper\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2016-06-23 10:04+0200\n"
"PO-Revision-Date: 2016-07-05 06:35+0000\n"
"Last-Translator: Emily Dong <Emily.Dong@excel-gits.com>\n"
"Language-Team: Chinese (Taiwan) <https://l10n.opensuse.org/projects/zypper/"
"master/zh_TW/>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Weblate 2.6\n"

#. TranslatorExplanation E.g. "package 'zypper' not found."
#: src/info.cc:175 src/info.cc:168
#, fuzzy, c-format, boost-format
msgid "%s '%s' not found."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"%s「%s」找不到。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"%s '%s' 找不到。"

#. TranslatorExplanation %s = resolvable type (package, patch, pattern, etc - untranslated).
#: src/info.cc:213 src/info.cc:206
#, fuzzy, c-format, boost-format
msgid "Info for type '%s' not implemented."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"「%s」類型的資訊功能尚未完成。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"'%s' 類型的詳細資訊功能尚未完成。"

#: src/info.cc:424 src/info.cc:419
#, fuzzy
msgid "(empty)"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"(空白)\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"(空)"

#: src/info.cc:490 src/info.cc:485
#, fuzzy
msgid "End of Support"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"支援結束\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"終止支援"

#: src/info.cc:503 src/info.cc:498
#, fuzzy
msgid "Update Repositories"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"更新儲存庫\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"更新套件庫"

#: src/info.cc:518 src/info.cc:513
#, fuzzy
msgid "Provided by enabled repository"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"由啟用的儲存庫提供\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"由啟用的套件庫提供"

#: src/info.cc:524 src/info.cc:519
#, fuzzy
msgid "Not provided by any enabled repository"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"任何啟用的儲存庫均未提供\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"非由任何啟用的套件庫提供"

#. translators: %1% - command name or path
#. translators: %2% - system error message
#: src/subcommand.cc:304 src/subcommand.cc:303
#, fuzzy, boost-format
msgid "waitpid for %1% failed (%2%)"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"%1% 的 waitpid 失敗 (%2%)\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"%1% waitpid 失敗 (%2%)"

#. translators: %1% - command name or path
#. translators: %2% - returned PID (number)
#. translators: %3% - expected PID (number)
#: src/subcommand.cc:314 src/subcommand.cc:313
#, fuzzy, boost-format
msgid "waitpid for %1% returns unexpected pid %2% while waiting for %3%"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"%1% 的 waitpid 傳回非預期的 PID %2%，而預期應為 %3%\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"%1% waitpid 回傳非預期的 pid %2% (預期為 %3%)"

#. translators: %1% - command name or path
#. translators: %2% - signal number
#. translators: %3% - signal name
#: src/subcommand.cc:325 src/subcommand.cc:324
#, fuzzy, boost-format
msgid "%1% was killed by signal %2% (%3%)"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"%1% 已被訊號 %2% 停止 (%3%)\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"%1% 被信號 %2% 強制結束 (%3%)"

#. translators: %1% - command name or path
#. translators: %2% - exit code (number)
#: src/subcommand.cc:339 src/subcommand.cc:338
#, fuzzy, boost-format
msgid "%1% exited with status %2%"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"%1% 已結束並傳回狀態 %2%\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"%1% 結束 (回傳值 %2%)"

#. translators: %1% - command name or path
#. translators: %2% - status (number)
#: src/subcommand.cc:354 src/subcommand.cc:353
#, fuzzy, boost-format
msgid "waitpid for %1% returns unexpected exit status %2%"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"%1% 的 waitpid 傳回非預期的結束狀態 %2%\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"%1% waitpid 回傳非預期的結束狀態值 %2%"

#: src/subcommand.cc:387 src/subcommand.cc:386
#, fuzzy, boost-format
msgid ""
"Zypper subcommands are standalone executables that live in the\n"
"zypper_execdir ('%1%').\n"
"\n"
"For subcommands zypper provides a wrapper that knows where the\n"
"subcommands live, and runs them by passing command-line arguments\n"
"to them.\n"
"\n"
"If a subcommand is not found in the zypper_execdir, the wrapper\n"
"will look in the rest of your $PATH for it. Thus, it's possible\n"
"to write local zypper extensions that don't live in system space.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"Zypper 子指令是獨立的可執行檔，\n"
"存放於 zypper_execdir (%1%) 中。\n"
"\n"
"對於子指令，zypper 提供一個包裝程式，\n"
"能夠知道在哪裡找到這些子指令，\n"
"並透過傳遞指令行參數來執行它們。\n"
"\n"
"若某個子指令無法在 zypper_execdir 下找到，包裝程式會到您的 $PATH\n"
"下尋找。是故寫一個不存放在系統空間，僅供局部使用的 zypper 擴充是\n"
"可以做到的。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"Zypper 個別指令是獨立的可執行檔，存放於 zypper_execdir (%1%) 中。\n"
"\n"
"對於個別指令，zypper 提供一個包裝程式，能夠知道在哪裡找到這些個別指令，\n"
"並透過傳遞指令行參數來執行它們。\n"
"\n"
"若某個個別指令無法在 zypper_execdir 下找到，包裝程式會到您的 $PATH\n"
"下尋找。是故寫一個不存放在系統空間，僅供局部使用的 zypper 擴充是\n"
"可以做到的。\n"

#: src/subcommand.cc:402 src/subcommand.cc:401
#, fuzzy, boost-format
msgid ""
"Using zypper global-options together with subcommands, as well as\n"
"executing subcommands in '%1%' is currently not supported.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"目前不支援將 zypper 全域選項與子指令一同使用，也不支援\n"
"執行「%1%」中的子指令。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"目前不支援將 zypper 全域選項與個別指令一同使用，也不支援\n"
"執行「%1%」中的個別指令。\n"

#. translators: headline of an enumeration; %1% is a directory name
#: src/subcommand.cc:419 src/subcommand.cc:418
#, fuzzy, boost-format
msgid "Available zypper subcommands in '%1%'"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"%1% 中可用的 zypper 子指令\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"'%1%' 中可用的 zypper 個別指令"

#. translators: headline of an enumeration
#: src/subcommand.cc:424 src/subcommand.cc:423
#, fuzzy
msgid "Zypper subcommands available from elsewhere on your $PATH"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"您的 $PATH 中可用的 zypper 子指令\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"您的 $PATH 中可用的 zypper 個別指令"

#. translators: helptext; %1% is a zypper command
#: src/subcommand.cc:429 src/subcommand.cc:428
#, fuzzy, boost-format
msgid "Type '%1%' to get subcommand-specific help if available."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"輸入「%1%」可獲取子指令的說明 (若有)。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"輸入 '%1%' 可獲取個別指令的說明 (若有)。"

#. translators: %1% - command name
#: src/subcommand.cc:452 src/subcommand.cc:451
#, fuzzy, boost-format
msgid "Manual entry for %1% can't be shown"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"%1% 的手動輸入項目無法顯示\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"%1% 的手動輸入無法顯示"

#: src/RequestFeedback.cc:36 src/RequestFeedback.cc:40
#, fuzzy, c-format, boost-format
msgid "'%s' not found in package names. Trying capabilities."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"套件名稱中找不到「%s」。正在嘗試其他功能。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件名稱中找不到 '%s'。正在嘗試其他功能。"

#: src/RequestFeedback.cc:43 src/RequestFeedback.cc:46
#, fuzzy, c-format, boost-format
msgid "Package '%s' not found."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"找不到套件「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"找不到套件 '%s'。"

#: src/RequestFeedback.cc:45 src/RequestFeedback.cc:48
#, fuzzy, c-format, boost-format
msgid "Patch '%s' not found."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"修補程式「%s」找不到。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"找不到修補程式 '%s'。"

#: src/RequestFeedback.cc:47 src/RequestFeedback.cc:50
#, fuzzy, c-format, boost-format
msgid "Product '%s' not found."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"找不到產品「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"找不到產品 '%s'。"

#: src/RequestFeedback.cc:49 src/RequestFeedback.cc:52
#, fuzzy, c-format, boost-format
msgid "Pattern '%s' not found."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"找不到模式「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"找不到樣式 '%s'。"

#: src/RequestFeedback.cc:51 src/misc.cc:338 src/RequestFeedback.cc:54
#: src/misc.cc:298
#, fuzzy, c-format, boost-format
msgid "Source package '%s' not found."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"找不到來源套件「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"找不到原始碼套件 '%s'。"

#. just in case
#: src/RequestFeedback.cc:53 src/RequestFeedback.cc:56
#, fuzzy, c-format, boost-format
msgid "Object '%s' not found."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"找不到物件「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"找不到物件 '%s'。"

#: src/RequestFeedback.cc:58 src/RequestFeedback.cc:61
#, fuzzy, c-format, boost-format
msgid "Package '%s' not found in specified repositories."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"指定儲存庫中找不到套件「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"在指定套件庫中找不到套件 '%s' 。"

#: src/RequestFeedback.cc:60 src/RequestFeedback.cc:63
#, fuzzy, c-format, boost-format
msgid "Patch '%s' not found in specified repositories."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"指定儲存庫中找不到修補程式「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"在指定套件庫中找不到修補程式 '%s' 。"

#: src/RequestFeedback.cc:62 src/RequestFeedback.cc:65
#, fuzzy, c-format, boost-format
msgid "Product '%s' not found in specified repositories."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"指定儲存庫中找不到產品「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"在指定套件庫中找不到產品 '%s'。"

#: src/RequestFeedback.cc:64 src/RequestFeedback.cc:67
#, fuzzy, c-format, boost-format
msgid "Pattern '%s' not found in specified repositories."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"指定儲存庫中找不到模式「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"在指定套件庫中找不到樣式 '%s' 。"

#: src/RequestFeedback.cc:66 src/RequestFeedback.cc:69
#, fuzzy, c-format, boost-format
msgid "Source package '%s' not found in specified repositories."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"指定儲存庫中找不到來源套件「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"在指定套件庫中找不到原始碼套件 '%s' 。"

#. just in case
#: src/RequestFeedback.cc:68 src/RequestFeedback.cc:71
#, fuzzy, c-format, boost-format
msgid "Object '%s' not found in specified repositories."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"指定儲存庫中找不到物件「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"在指定套件庫中找不到物件 '%s' 。"

#. translators: meaning a package %s or provider of capability %s
#: src/RequestFeedback.cc:73 src/RequestFeedback.cc:76
#, fuzzy, c-format, boost-format
msgid "No provider of '%s' found."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未找到「%s」的提供者。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"找不到提供 '%s' 的提供者。"

#. #-#-#-#-#  new (zypper)  #-#-#-#-#
#. wildcards used
#: src/RequestFeedback.cc:82 src/RequestFeedback.cc:84
#, fuzzy, c-format, boost-format
msgid "No package matching '%s' is installed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未安裝與「%s」相符的套件。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"未安裝與 '%s' 相符的套件。"

#: src/RequestFeedback.cc:85 src/RequestFeedback.cc:86
#, fuzzy, c-format, boost-format
msgid "Package '%s' is not installed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"套件「%s」尚未安裝。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件 '%s' 尚未安裝。"

#. translators: meaning provider of capability %s
#: src/RequestFeedback.cc:89 src/RequestFeedback.cc:90
#, fuzzy, c-format, boost-format
msgid "No provider of '%s' is installed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未安裝「%s」的提供者。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"未安裝 '%s' 的提供者。"

#: src/RequestFeedback.cc:95
#, fuzzy, c-format, boost-format
msgid "'%s' is already installed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"「%s」已經安裝。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"'%s' 已經安裝。"

#. translators: %s are package names
#: src/RequestFeedback.cc:99 src/RequestFeedback.cc:98
#, fuzzy, c-format, boost-format
msgid "'%s' providing '%s' is already installed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"「%s」(提供「%s」) 已經安裝。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"'%s' (提供 '%s') 已經安裝。"

#: src/RequestFeedback.cc:107 src/RequestFeedback.cc:105
#, fuzzy, c-format, boost-format
msgid ""
"No update candidate for '%s'. The highest available version is already "
"installed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"無「%s」的更新候選。已安裝最新的可用版本。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"沒有 '%s' 的更新候選。最新的可用版本已經安裝了。"

#: src/RequestFeedback.cc:112 src/RequestFeedback.cc:108
#, fuzzy, c-format, boost-format
msgid "No update candidate for '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"無「%s」的更新候選。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"'%s' 無更新候選。"

#: src/RequestFeedback.cc:119 src/RequestFeedback.cc:114
#, fuzzy, c-format, boost-format
msgid ""
"There is an update candidate '%s' for '%s', but it does not match the "
"specified version, architecture, or repository."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"有更新候選「%s」(適用於「%s」)，但它不符合特定版本、架構或儲存庫。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"有更新候選 '%s' (適用於 '%s')，但它不符合特定版本、架構或套件庫。"

#: src/RequestFeedback.cc:132 src/RequestFeedback.cc:123
#, fuzzy, c-format, boost-format
msgid ""
"There is an update candidate for '%s', but it is from a different vendor. "
"Use '%s' to install this candidate."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"針對「%s」有一個更新候選，但來自其他廠商。請使用「%s」來安裝此更新。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"有針對 '%s' 的更新候選，但它是從不同供應者提供。使用 '%s' 來安裝這個更新。"

#: src/RequestFeedback.cc:145 src/RequestFeedback.cc:132
#, fuzzy, c-format, boost-format
msgid ""
"There is an update candidate for '%s', but it comes from a repository with a "
"lower priority. Use '%s' to install this candidate."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"針對「%s」有一個更新候選，但來自優先等級較低的儲存庫。請使用「%s」來安裝此更"
"新。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"有針對 '%s' 的更新候選，但是從優先等級較低的套件庫而來。 使用 '%s' 來安裝此更"
"新。"

#: src/RequestFeedback.cc:157 src/RequestFeedback.cc:142
#, fuzzy, c-format, boost-format
msgid ""
"There is an update candidate for '%s', but it is locked. Use '%s' to unlock "
"it."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"有一個「%s」的更新候選，但被鎖定。請使用「%s」解除鎖定。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"有一個 '%s' 的更新候選，但被鎖定。請使用 '%s' 解除鎖定。"

#: src/RequestFeedback.cc:165 src/RequestFeedback.cc:148
#, fuzzy, c-format, boost-format
msgid ""
"Package '%s' is not available in your repositories. Cannot reinstall, "
"upgrade, or downgrade."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"您的儲存庫中未提供套件「%s」。無法重新安裝、升級或降級。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件 '%s' 無法在您的套件庫中找到。無法重新安裝、升級或降級。"

#: src/RequestFeedback.cc:178 src/RequestFeedback.cc:158
#, fuzzy, c-format, boost-format
msgid ""
"The selected package '%s' from repository '%s' has lower version than the "
"installed one."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"所選套件「%s」(來自儲存庫「%s」) 的版本低於已安裝的版本。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"所選套件 '%s' (來自套件庫 '%s') 的版本低於已安裝的版本。"

#. translators: %s = "zypper install --oldpackage package-version.arch"
#: src/RequestFeedback.cc:185 src/RequestFeedback.cc:162
#, fuzzy, c-format, boost-format
msgid "Use '%s' to force installation of the package."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"使用「%s」強制安裝套件。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"使用 '%s' 強迫安裝套件。"

#: src/RequestFeedback.cc:194 src/RequestFeedback.cc:169
#, fuzzy, c-format, boost-format
msgid "Patch '%s' is interactive, skipping."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"修補程式「%s」是互動模式，將會跳過。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"修補程式 '%s' 是互動式的，跳過。"

#: src/RequestFeedback.cc:201 src/RequestFeedback.cc:175
#, fuzzy, c-format, boost-format
msgid "Patch '%s' is not needed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"不需要修補程式「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"不需要修補程式 '%s'。"

#: src/RequestFeedback.cc:210 src/RequestFeedback.cc:192
#, fuzzy, c-format, boost-format
msgid "Patch '%s' is locked. Use '%s' to install it, or unlock it using '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"修補程式「%s」已鎖定。請使用「%s」進行安裝或使用「%s」將其解鎖。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"修補程式 '%s' 已被鎖定。請用 '%s' 來安裝它，或使用 '%s' 解除鎖定。"

#: src/RequestFeedback.cc:218 src/RequestFeedback.cc:199
#, fuzzy, c-format, boost-format
msgid "Patch '%s' is not in the specified category."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"修補程式「%s」不在指定的類別中。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"修補程式 '%s' 不在指定類別中。"

#: src/RequestFeedback.cc:226 src/RequestFeedback.cc:206
#, fuzzy, c-format, boost-format
msgid "Patch '%s' has not the specified severity."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"修補程式「%s」沒有指定的嚴重性。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"修補程式 '%s' 不在指定嚴重度中。"

#: src/RequestFeedback.cc:234 src/RequestFeedback.cc:213
#, fuzzy, c-format, boost-format
msgid "Patch '%s' was issued after the specified date."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"修補程式「%s」的發行日期晚於指定日期。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"修補程式 '%s' 已在指定日期後發行。"

#: src/RequestFeedback.cc:240 src/RequestFeedback.cc:218
#, fuzzy, c-format, boost-format
msgid "Selecting '%s' from repository '%s' for installation."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在選取「%s」(來自儲存庫「%s」) 以進行安裝。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在選取 '%s' (來自套件庫 '%s') 以安裝。"

#: src/RequestFeedback.cc:246 src/RequestFeedback.cc:222
#, fuzzy, c-format, boost-format
msgid "Forcing installation of '%s' from repository '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在強制安裝「%s」(來自儲存庫「%s」)。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在強制安裝 '%s' (來自套件庫 '%s')。"

#: src/RequestFeedback.cc:251 src/RequestFeedback.cc:226
#, fuzzy, c-format, boost-format
msgid "Selecting '%s' for removal."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在選取「%s」以移除。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在選取 '%s' 以移除。"

#: src/RequestFeedback.cc:259 src/RequestFeedback.cc:233
#, fuzzy, c-format, boost-format
msgid "'%s' is locked. Use '%s' to unlock it."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"「%s」已鎖定。請使用「%s」解除鎖定。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"'%s' 已被鎖定。請用 '%s' 解除鎖定。"

#: src/RequestFeedback.cc:264 src/RequestFeedback.cc:238
#, fuzzy, c-format, boost-format
msgid "Adding requirement: '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在新增要求︰「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在新增需求：'%s'。"

#: src/RequestFeedback.cc:267 src/RequestFeedback.cc:241
#, fuzzy, c-format, boost-format
msgid "Adding conflict: '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在新增衝突︰「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在新增衝突：'%s'。"

#: src/Summary.cc:1224 src/Summary.cc:1212
#, fuzzy, boost-format
msgid "Run '%1%' to see the complete list of locked items."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"執行「%1%」以查看鎖定項目的完整清單。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"執行 '%1%' 查看完整的鎖定項目清單。"

#: src/Summary.cc:1255 src/Summary.cc:1243
#, fuzzy
msgid "Download only."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"只下載。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"僅下載。"

#: src/Summary.cc:1264 src/Summary.cc:1251
#, fuzzy
msgid "No additional space will be used or freed after the operation."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"完成操作後，不會使用或釋出額外的空間。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"完成操作後，不會有額外的空間被使用或釋出。"

#: src/callbacks/keyring.h:37 src/callbacks/keyring.h:36
#, fuzzy
msgid "Repository:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫："

#: src/callbacks/keyring.h:39 src/callbacks/keyring.h:38
#, fuzzy
msgid "Key Name:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"金鑰名稱︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"金鑰名稱："

#: src/callbacks/keyring.h:43 src/callbacks/keyring.h:42
#, fuzzy
msgid "Rpm Name:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"RPM 名稱︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"RPM 名稱："

#: src/callbacks/keyring.h:69 src/callbacks/keyring.h:68
#, fuzzy, boost-format
msgid "The gpg key signing file '%1%' has expired."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"GPG 金鑰簽章檔案「%1%」已過期。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"gpg 金鑰簽章的檔案 '%1%' 已過期。"

#: src/callbacks/keyring.h:98 src/callbacks/keyring.h:97
#, fuzzy, c-format, boost-format
msgid "Accepting an unsigned file '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"接受未簽署的檔案 %s。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在接受一個未簽章的檔案 '%s'。"

#: src/callbacks/keyring.h:102 src/callbacks/keyring.h:101
#, fuzzy, c-format, boost-format
msgid "Accepting an unsigned file '%s' from repository '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"接受一個未簽署的檔案 %s (從儲存庫 %s)。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在接受一個未簽章的檔案 '%s' (來自套件庫 '%s')。"

#. TranslatorExplanation: speaking of a file
#: src/callbacks/keyring.h:113 src/callbacks/keyring.h:112
#, fuzzy, c-format, boost-format
msgid "File '%s' is unsigned, continue?"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"檔案 %s 未簽署，要繼續嗎？\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"檔案 '%s' 未簽章，要繼續嗎？"

#. TranslatorExplanation: speaking of a file
#: src/callbacks/keyring.h:117 src/callbacks/keyring.h:116
#, fuzzy, c-format, boost-format
msgid "File '%s' from repository '%s' is unsigned, continue?"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"檔案 %s (來自儲存庫 %s) 未簽署，要繼續嗎？\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"檔案 ′%s′ (來自套件庫 ′%s′) 未簽章，要繼續嗎？"

#: src/callbacks/keyring.h:140 src/callbacks/keyring.h:139
#, fuzzy, c-format, boost-format
msgid "Accepting file '%s' signed with an unknown key '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"接受檔案 %s，此檔案由未知金鑰 %s 簽署。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在接受檔案 '%s'，此檔案使用未知的金鑰 '%s' 簽章。"

#: src/callbacks/keyring.h:144 src/callbacks/keyring.h:143
#, fuzzy, c-format, boost-format
msgid ""
"Accepting file '%s' from repository '%s' signed with an unknown key '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"接受檔案 %s (來自儲存庫 %s)，此檔案使用未知的金鑰 %s 簽署。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在接受檔案 ′%s′ (來自套件庫 ′%s′)，此檔案使用未知的金鑰 '%s' 簽章。"

#. translators: the last %s is gpg key ID
#: src/callbacks/keyring.h:154 src/callbacks/keyring.h:153
#, fuzzy, c-format, boost-format
msgid "File '%s' is signed with an unknown key '%s'. Continue?"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"檔案 %s 以未知金鑰 %s 簽署。要繼續嗎？\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"檔案 '%s' 是以不明金鑰 '%s' 簽章。要繼續嗎？"

#. translators: the last %s is gpg key ID
#: src/callbacks/keyring.h:158 src/callbacks/keyring.h:157
#, fuzzy, c-format, boost-format
msgid ""
"File '%s' from repository '%s' is signed with an unknown key '%s'. Continue?"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"檔案 %s (來自儲存庫 %s) 使用未知金鑰 %s 簽署。要繼續嗎？\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"檔案 '%s' (來自套件庫 '%s') 是以不明金鑰 '%s' 簽章。要繼續嗎？"

#: src/callbacks/keyring.h:174 src/callbacks/keyring.h:173
#, fuzzy
msgid "Automatically importing the following key:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"自動輸入以下金鑰：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"自動匯入下列金鑰："

#: src/callbacks/keyring.h:178 src/callbacks/keyring.h:177
#, fuzzy
msgid "New repository or package signing key received:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"收到新的儲存庫或套件簽署金鑰：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"收到新的套件庫或套件簽署金鑰："

#. translators: this message is shown after showing description of the key
#: src/callbacks/keyring.h:200 src/callbacks/keyring.h:199
#, fuzzy
msgid "Do you want to reject the key, trust temporarily, or trust always?"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"您想要拒絕此金鑰，暫時信任，還是永遠信任？\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"您想要拒絕此金鑰，暫時信任，或永遠信任？"

#. translators: help text for the 'a' option in the 'r/t/a' prompt
#: src/callbacks/keyring.h:222 src/callbacks/keyring.h:221
#, fuzzy
msgid "Trust the key and import it into trusted keyring."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"信任此金鑰並將其輸入到信任的金鑰圈。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"信任此金鑰並匯入到信任的金鑰圈。"

#: src/callbacks/keyring.h:258 src/callbacks/keyring.h:257
#, fuzzy, c-format, boost-format
msgid "Ignoring failed signature verification for file '%s'!"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"忽略檔案 %s 的失敗簽章驗證！\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在忽略檔案 '%s' 的失敗簽章驗證！"

#: src/callbacks/keyring.h:261 src/callbacks/keyring.h:260
#, fuzzy, c-format, boost-format
msgid ""
"Ignoring failed signature verification for file '%s' from repository '%s'!"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"忽略檔案 %s (來自儲存庫 %s) 的失敗簽章驗證！\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在忽略檔案 '%s' (來自套件庫 '%s') 的失敗簽章驗證！"

#: src/callbacks/keyring.h:277 src/callbacks/keyring.h:276
#, fuzzy, c-format, boost-format
msgid "Signature verification failed for file '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"檔案 %s 的簽章確認失敗。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"檔案 '%s' 的簽章驗證失敗。"

#: src/callbacks/keyring.h:280 src/callbacks/keyring.h:279
#, fuzzy, c-format, boost-format
msgid "Signature verification failed for file '%s' from repository '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"檔案 %s (來自儲存庫 %s) 的簽章驗證失敗。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"檔案 '%s' (來自套件庫 '%s') 的簽章驗證失敗。"

#: src/callbacks/keyring.h:285 src/callbacks/keyring.h:284
#, fuzzy
msgid ""
"Warning: This might be caused by a malicious change in the file!\n"
"Continuing might be risky. Continue anyway?"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"警告：這可能是由檔案中的一些惡意變更所致！\n"
"繼續執行會有風險！是否仍要繼續？\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"警告：這可能是因為檔案遭到惡意的修改！\n"
"繼續進行將有風險！無論如何要繼續嗎？"

#: src/callbacks/keyring.h:309 src/callbacks/keyring.h:307
#, fuzzy, c-format, boost-format
msgid "No digest for file %s."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"檔案 %s 沒有摘要。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"檔案 %s 無摘要。"

#: src/callbacks/keyring.h:318 src/callbacks/keyring.h:315
#, fuzzy, c-format, boost-format
msgid "Unknown digest %s for file %s."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未知的摘要 %s (檔案 %s)。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"不明摘要 %s (檔案 %s)。"

#: src/callbacks/keyring.h:336 src/callbacks/keyring.h:332
#, fuzzy, boost-format
msgid ""
"Digest verification failed for file '%1%'\n"
"[%2%]\n"
"\n"
"  expected %3%\n"
"  but got  %4%\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"檔案「%1%」的摘要驗證失敗\n"
"[%2%]\n"
"\n"
"  預期為 %3%\n"
"  實際為 %4%\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"檔案 '%1%' 訊息摘要驗證錯誤\n"
"[%2%]\n"
"\n"
"  預期為 %3%\n"
"  實際為 %4%\n"

#: src/callbacks/keyring.h:348 src/callbacks/keyring.h:344
#, fuzzy
msgid ""
"Accepting packages with wrong checksums can lead to a corrupted system and "
"in extreme cases even to a system compromise."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"接受安裝檢查總數不正確的套件會導致系統損壞，甚至危及系統安全。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"接受安裝錯誤檢核碼的套件會導致系統損壞，甚至危及系統安全。"

#: src/callbacks/keyring.h:356 src/callbacks/keyring.h:352
#, fuzzy, boost-format
msgid ""
"However if you made certain that the file with checksum '%1%..' is secure, "
"correct\n"
"and should be used within this operation, enter the first 4 characters of "
"the checksum\n"
"to unblock using this file on your own risk. Empty input will discard the "
"file.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"然而，若您確定該檔案 (檢查總數「%1%..」) 是安全且正確的，\n"
"在此操作中應該要使用它，請輸入檢查總數的前 4 個字元來取消阻擋該檔案，\n"
"並請您自負風險。空白輸入將直接丟棄該檔案。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"然而，若您確定該檔案 (檢核碼 '%1%..') 是安全且正確的，在此操作中應該要使用"
"它，\n"
"請輸入檢核碼的前 4 個字元來取消阻擋該檔案，並請您自負風險。空白輸入將直接放棄"
"該檔案。\n"

#. translators: A prompt option
#: src/callbacks/keyring.h:363 src/callbacks/keyring.h:359
#, fuzzy
msgid "discard"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"丟棄\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"放棄"

#. translators: A prompt option help text
#: src/callbacks/keyring.h:367 src/callbacks/keyring.h:363
#, fuzzy
msgid "Discard the file."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"丟棄該檔案。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"放棄該檔案。"

#. translators: A prompt text
#: src/callbacks/keyring.h:372 src/callbacks/keyring.h:368
#, fuzzy
msgid "Unblock or discard?"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"取消阻擋或丟棄？\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"取消阻擋或放棄？"

#. TranslatorExplanation speaking of a script - "Running: script file name (package name, script dir)"
#: src/callbacks/rpm.h:138 src/callbacks/rpm.h:151
#, fuzzy, c-format, boost-format
msgid "Running: %s  (%s, %s)"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在執行：%s (%s，%s)\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在執行： %s  (%s,%s)"

#. TranslatorExplanation %1%(commandline option)
#: src/callbacks/rpm.h:372 src/callbacks/rpm.h:390
#, fuzzy, boost-format
msgid ""
"Checking for file conflicts requires not installed packages to be downloaded "
"in advance in order to access their file lists. See option '%1%' in the "
"zypper manual page for details."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"檢查檔案衝突需要提前下載未安裝的套件，以存取這些套件的檔案清單。如需詳細資"
"料，請參閱 zypper 手冊頁中的選項「%1%」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"檢查檔案衝突需要事先下載尚未安裝的套件，才能存取其檔案清單。詳情請見 zypper "
"說明文件中關於選項 '%1%' 的說明。"

#: src/callbacks/rpm.h:398 src/callbacks/rpm.h:416
#, fuzzy
msgid "Conflicting files will be replaced."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"衝突的檔案將被取代。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"衝突檔案將會被取代。"

#. TranslatorExplanation Problem description before asking whether to "Continue? [yes/no] (no):"
#: src/callbacks/rpm.h:404 src/callbacks/rpm.h:422
#, fuzzy
msgid ""
"File conflicts happen when two packages attempt to install files with the "
"same name but different contents. If you continue, conflicting files will be "
"replaced losing the previous content."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"當有兩個套件嘗試安裝名稱相同但內容不同的檔案時，便會發生檔案衝突。如果繼續，"
"衝突的檔案將被取代，並因此遺失先前的內容。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"當二個套件嘗試安裝檔名相同、內容卻不同的檔案時，檔案衝突就會發生。若您選擇繼"
"續，衝突檔案將會被取代，先前的內容也會消失。"

#. help text for the "Abort, retry, ignore?" prompt for media errors
#: src/callbacks/media.cc:30 src/callbacks/media.cc:28
#, fuzzy
msgid "Skip retrieval of the file and abort current operation."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"跳過檔案擷取並中止目前操作。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"跳過取得檔案並跳出目前操作。"

#. help text for the "Abort, retry, ignore?" prompt for media errors
#: src/callbacks/media.cc:32 src/callbacks/media.cc:30
#, fuzzy
msgid "Try to retrieve the file again."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"嘗試重新擷取檔案。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"嘗試再次取得檔案。"

#. help text for the "Abort, retry, ignore?" prompt for media errors
#: src/callbacks/media.cc:34 src/callbacks/media.cc:32
#, fuzzy
msgid ""
"Skip retrieval of the file and try to continue with the operation without "
"the file."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"跳過檔案擷取並嘗試在沒有此檔案的情況下繼續操作。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"跳過取得檔案並嘗試沒有此檔案而繼續操作。"

#. help text for the "Abort, retry, ignore?" prompt for media errors
#: src/callbacks/media.cc:36 src/callbacks/media.cc:34
#, fuzzy
msgid "Change current base URI and try retrieving the file again."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"變更目前的基礎 URI 並嘗試重新擷取檔案。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"變更目前基礎位址並嘗試重新取得檔案。"

#. translators: this is a prompt label, will appear as "New URI: "
#: src/callbacks/media.cc:52 src/callbacks/media.cc:49
#, fuzzy
msgid "New URI"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"新 URI\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"新位址"

#: src/callbacks/media.cc:83 src/callbacks/media.cc:79
#, fuzzy
msgid "Disable SSL certificate authority check and continue."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"停用 SSL 證書管理中心檢查並繼續。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"停用 SSL 憑證授權檢查並繼續。"

#: src/callbacks/media.cc:96 src/callbacks/media.cc:92
#, fuzzy
msgid "SSL certificate authority check disabled."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"SSL 證書管理中心檢查已停用。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"SSL 憑證授權檢查已停用。"

#: src/callbacks/media.cc:118 src/callbacks/media.cc:110
#, fuzzy
msgid "Try to eject the device manually."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"嘗試手動退出裝置。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"請嘗試手動退出裝置。"

#: src/callbacks/media.cc:129 src/callbacks/media.cc:121
#, fuzzy
msgid "Detected devices:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"偵測到的裝置︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"偵測到裝置："

#: src/callbacks/media.cc:162 src/callbacks/media.cc:154
#, fuzzy
msgid "Insert the CD/DVD and press ENTER to continue."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"插入 CD/DVD 並按 ENTER 繼續。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"插入 CD/DVD 並按下 ENTER 繼續。"

#: src/callbacks/media.cc:165 src/callbacks/media.cc:157
#, fuzzy
msgid "Retrying..."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在重新嘗試...\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"重新嘗試中..."

#. TranslatorExplanation translate letters 'y' and 'n' to whathever is appropriate for your language.
#. Try to check what answers does zypper accept (it always accepts y/n at least)
#. You can also have a look at the regular expressions used to check the answer here:
#. /usr/lib/locale/<your_locale>/LC_MESSAGES/SYS_LC_MESSAGES
#: src/callbacks/media.cc:230 src/callbacks/media.cc:220
#, fuzzy, c-format, boost-format
msgid ""
"Please insert medium [%s] #%d and type 'y' to continue or 'n' to cancel the "
"operation."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請放入媒體 [%s] # %d 然後鍵入 y 繼續，或 n 以取消此操作。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"請放入媒體 [%s] # %d 然後鍵入 'y' 繼續，或 'n' 以取消此操作。"

#: src/callbacks/media.cc:313 src/callbacks/media.cc:299
#, fuzzy, c-format, boost-format
msgid ""
"Authentication required to access %s. You need to be root to be able to read "
"the credentials from %s."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"存取 %s 需要授權。您需要 root 權限才能從 %s 中讀取身分證明。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"存取 %s 需要授權。您必須是 root 才可以從 %s 讀取憑證。"

#: src/callbacks/locks.h:27
#, fuzzy
msgid ""
"The following query locks the same objects as the one you want to remove:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"以下查詢會鎖定您要移除的那些物件︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"下列的查詢鎖定了您想要移除的物件："

#: src/callbacks/locks.h:30
#, fuzzy
msgid "The following query locks some of the objects you want to unlock:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"以下查詢會鎖定某些您不想鎖定的物件︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"下列的查詢鎖定了一些您想要解鎖的物件："

#: src/callbacks/locks.h:35 src/callbacks/locks.h:50
#, fuzzy
msgid "Do you want to remove this lock?"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"您要移除此鎖定嗎？\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"您想要移除此鎖定嗎？"

#: src/callbacks/locks.h:45
#, fuzzy
msgid "The following query does not lock anything:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"以下查詢不會鎖定任何物件︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"下列的查詢沒有鎖定任何東西："

#: src/callbacks/repo.h:50 src/callbacks/repo.h:49
#, fuzzy
msgid "Retrieving delta"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"取回 delta\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在取出 delta"

#. translators: this text is a progress display label e.g. "Applying delta foo [42%]"
#: src/callbacks/repo.h:75 src/callbacks/repo.h:74
#, fuzzy
msgid "Applying delta"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"套用 delta\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在套用 delta"

#: src/callbacks/repo.h:129 src/callbacks/repo.h:128
#, fuzzy, c-format, boost-format
msgid "Retrieving %s %s-%s.%s"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"取回 %s %s-%s.%s\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在取出 %s %s-%s.%s"

#: src/callbacks/repo.h:218 src/callbacks/repo.h:217
#, fuzzy
msgid "Signature verification failed"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"簽名驗證失敗\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"簽章驗證失敗"

#: src/Command.cc:199 src/Command.cc:201
#, fuzzy, c-format, boost-format
msgid "Unknown command '%s'"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未知的指令 %s\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"未知的指令 '%s'"

#. translators: 'Volatile' refers to changes we previously tagged as 'XYZ changed to SOMETHING [volatile]'
#: src/repos.cc:59 src/repos.cc:53
#, fuzzy, boost-format
msgid ""
"Repo '%1%' is managed by service '%2%'. Volatile changes are reset by the "
"next service refresh!"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%1%」由服務「%2%」管理。暫時性的變更將會在下次服務重新整理時重設。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%1%' 由服務 '%2%' 管理。暫時性的變動將會在下次服務重新整理時被重設。"

#: src/repos.cc:88 src/repos.cc:84
#, fuzzy, c-format, boost-format
msgid ""
"Invalid priority '%s'. Use a positive integer number. The greater the "
"number, the lower the priority."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"優先程度「%s」無效。請使用正整數。數字越大，優先程度越低。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無效的優先權 '%s'。 請使用正整數。數字越大優先權越低。"

#: src/repos.cc:207 src/repos.cc:202
#, fuzzy, c-format, boost-format
msgid "Repository '%s' is up to date."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」已是最新狀態。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 已是最新狀態。"

#: src/repos.cc:214 src/repos.cc:208
#, fuzzy, c-format, boost-format
msgid "The up-to-date check of '%s' has been delayed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"已延遲對「%s」的最新檢查。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"'%s' 的最新狀態檢查已被延遲。"

#: src/repos.cc:236 src/repos.cc:230
#, fuzzy
msgid "Forcing raw metadata refresh"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"強制重新整理原始中繼資料\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在強迫原始中繼資料重新整理"

#: src/repos.cc:243 src/repos.cc:236
#, fuzzy, c-format, boost-format
msgid "Retrieving repository '%s' metadata"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"取回儲存庫「%s」中繼資料\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在取出套件庫 '%s' 中繼資料"

#: src/repos.cc:269 src/repos.cc:263
#, fuzzy, c-format, boost-format
msgid "Do you want to disable the repository %s permanently?"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"您要永久停用儲存庫 %s 嗎？\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"您要永久停用套件庫 %s 嗎？"

#: src/repos.cc:285 src/repos.cc:279
#, fuzzy, c-format, boost-format
msgid "Error while disabling repository '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"停用儲存庫「%s」時發生錯誤。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"停用套件庫 '%s' 發生錯誤。"

#: src/repos.cc:303 src/repos.cc:295
#, fuzzy, c-format, boost-format
msgid "Problem retrieving files from '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"從「%s」取回檔案時出現問題。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"從 '%s' 取出檔案出現問題。"

#: src/repos.cc:317 src/repos.cc:308
#, fuzzy, c-format, boost-format
msgid "No URIs defined for '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"「%s」沒有定義 URI。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"'%s' 沒有定義位址。"

#. TranslatorExplanation the first %s is a .repo file path
#: src/repos.cc:321 src/repos.cc:313
#, fuzzy, c-format, boost-format
msgid ""
"Please add one or more base URI (baseurl=URI) entries to %s for repository "
"'%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請新增一個或數個基礎 URI (baseurl=URI) 項目到 %s，以供儲存庫「%s」使用。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"請加入一個或數個基礎位址 (baseurl=位址) 項目到 %s，以供套件庫 '%s' 使用。"

#: src/repos.cc:333 src/repos.cc:327
#, fuzzy
msgid "No alias defined for this repository."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"這個儲存庫未定義別名。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"這個套件庫未定義別名。"

#: src/repos.cc:346 src/repos.cc:339
#, fuzzy, c-format, boost-format
msgid "Repository '%s' is invalid."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」無效。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 無效。"

#: src/repos.cc:347 src/repos.cc:340
#, fuzzy
msgid ""
"Please check if the URIs defined for this repository are pointing to a valid "
"repository."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請檢查為此儲存庫定義的 URI 是否指向有效的儲存庫。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"請檢查為此套件庫定義的位址是否指向有效的套件庫。"

#: src/repos.cc:360 src/repos.cc:352
#, fuzzy, c-format, boost-format
msgid "Error retrieving metadata for '%s':"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"取回「%s」的中繼資料時出錯：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"取出 '%s' 的中繼資料發生錯誤："

#: src/repos.cc:375 src/repos.cc:365
#, fuzzy
msgid "Forcing building of repository cache"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"強制建立儲存庫快取\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在強迫建立套件庫快取"

#: src/repos.cc:401 src/repos.cc:390
#, fuzzy, c-format, boost-format
msgid "Error parsing metadata for '%s':"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"分析「%s」的中繼資料時發生錯誤：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"分析 '%s' 的中繼資料發生錯誤："

#. TranslatorExplanation Don't translate the URL unless it is translated, too
#: src/repos.cc:403 src/repos.cc:392
#, fuzzy
msgid ""
"This may be caused by invalid metadata in the repository, or by a bug in the "
"metadata parser. In the latter case, or if in doubt, please, file a bug "
"report by following instructions at http://en.opensuse.org/Zypper/"
"Troubleshooting"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"這可能是因為儲存庫中的中繼資料無效，或中繼資料剖析器有錯誤。若是後者的緣故 "
"(或您懷疑是)，請參閱 http://en.opensuse.org/Zypper/Troubleshooting 的指示發出"
"錯誤回報。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"這可能是因為套件庫的中繼資訊不適用，或中繼資訊分析器存在錯誤。若是後者的情形"
"(或您懷疑是)請參考 http://en.opensuse.org/Zypper/Troubleshooting 的指引發出錯"
"誤回報"

#: src/repos.cc:417 src/repos.cc:401
#, fuzzy, c-format, boost-format
msgid "Repository metadata for '%s' not found in local cache."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"在本地快取中找不到「%s」的儲存庫中繼資料。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"在本機快取中找不到 '%s' 的套件庫中繼資料。"

#: src/repos.cc:635 src/repos.cc:609
#, fuzzy, c-format, boost-format
msgid "Repository '%s' not found by its alias, number, or URI."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"無法由它的別名、編號或 URI 找到儲存庫「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無法由它的別名、編號或位址找到套件庫 '%s'。"

#: src/repos.cc:639 src/repos.cc:612
#, fuzzy, c-format, boost-format
msgid "Use '%s' to get the list of defined repositories."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請使用「%s」獲取已定義儲存庫的清單。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"請用 '%s' 取得已定義的套件庫清單。"

#: src/repos.cc:662 src/repos.cc:633
#, fuzzy, c-format, boost-format
msgid "Ignoring disabled repository '%s'"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在跳過已停用的儲存庫「%s」\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在忽略已停用的套件庫 '%s'"

#: src/repos.cc:749 src/repos.cc:756 src/repos.cc:716 src/repos.cc:722
#, fuzzy, c-format, boost-format
msgid "Ignoring repository '%s' because of '%s' option."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"忽略儲存庫 %s 因為使用了 %s 選項。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在忽略套件庫 '%s'，因為使用了 '%s' 選項。"

#: src/repos.cc:782 src/repos.cc:749
#, fuzzy, c-format, boost-format
msgid "Scanning content of disabled repository '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在掃描已停用儲存庫「%s」的內容。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在掃描已停用的套件庫 '%s' 的內容。"

#: src/repos.cc:805 src/repos.cc:843 src/repos.cc:1362 src/repos.cc:765
#: src/repos.cc:798 src/repos.cc:1297
#, fuzzy, c-format, boost-format
msgid "Skipping repository '%s' because of the above error."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"因以上的錯誤跳過儲存庫「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"由於上述錯誤，正在跳過套件庫 '%s'。"

#: src/repos.cc:824 src/repos.cc:784
#, fuzzy, c-format, boost-format
msgid ""
"Repository '%s' is out-of-date. You can run 'zypper refresh' as root to "
"update it."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」已過期。您可以用 root 執行 zypper refresh 來更新它。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 已過期。您可以用 root 執行 'zypper refresh' 來更新它。"

#: src/repos.cc:861 src/repos.cc:816
#, fuzzy, c-format, boost-format
msgid ""
"The metadata cache needs to be built for the '%s' repository. You can run "
"'zypper refresh' as root to do this."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"需要建立儲存庫「%s」的中繼資料快取。您可以用 root 執行 zypper refresh 來完"
"成。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"需要建立套件庫 '%s' 的中繼資料快取。您可以用 root 執行 'zypper refresh' 來完"
"成。"

#: src/repos.cc:868 src/repos.cc:820
#, fuzzy, c-format, boost-format
msgid "Disabling repository '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"停用儲存庫「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在停用套件庫 '%s'。"

#: src/repos.cc:881 src/repos.cc:834
#, fuzzy, c-format, boost-format
msgid "Temporarily enabling repository '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正暫時啟用儲存庫「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在暫時啟用套件庫 '%s'。"

#: src/repos.cc:889 src/repos.cc:841
#, fuzzy, c-format, boost-format
msgid "Repository '%s' stays disabled."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」處於停用狀態。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 維持停用狀態。"

#: src/repos.cc:938 src/repos.cc:897
#, fuzzy
msgid "Target initialization failed:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"目標啟始化失敗：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"目標初始化失敗："

#: src/repos.cc:940 src/Zypper.cc:4401 src/repos.cc:898 src/Zypper.cc:4440
#, fuzzy
msgid "Running 'zypper refresh' as root might resolve the problem."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"以 root 執行 zypper refresh 也許可以解決這個問題。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"以 root 執行 'zypper refresh' 也許可以解決這個問題。"

#. translators: repository priority (in zypper repos -p or -d)
#. translators: property name; short; used like "Name: value"
#. translators: repository priority (in zypper repos -p or -d)
#: src/repos.cc:1036 src/repos.cc:1154 src/repos.cc:1754 src/repos.cc:2580
#: src/repos.cc:990 src/repos.cc:1102 src/repos.cc:1634 src/repos.cc:2410
#, fuzzy
msgid "Priority"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"優先程度\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"優先權"

#. translators: property name; short; used like "Name: value"
#: src/repos.cc:1053 src/repos.cc:1147 src/repos.cc:1756 src/repos.cc:2583
#: src/repos.cc:1006 src/repos.cc:1095 src/repos.cc:1636 src/repos.cc:2413
#, fuzzy
msgid "URI"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"URI\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"位址"

#: src/repos.cc:1116 src/repos.cc:1069
#, fuzzy
msgid "No repositories defined."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"尚未定義儲存庫。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"尚未定義套件庫。"

#: src/repos.cc:1117 src/repos.cc:1070
#, fuzzy
msgid "Use the 'zypper addrepo' command to add one or more repositories."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請用「zypper addrepo」指令來新增一或多個儲存庫。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"請用 'zypper addrepo' 指令來加入一或多個套件庫。"

#: src/repos.cc:1159 src/repos.cc:1107
#, fuzzy
msgid "Path Prefix"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"路徑字首\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"路徑前置"

#: src/repos.cc:1160 src/repos.cc:1108
#, fuzzy
msgid "Parent Service"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"父服務\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"上層服務"

#: src/repos.cc:1161 src/repos.cc:1110
#, fuzzy
msgid "Repo Info Path"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫資訊路徑\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫資訊路徑"

#: src/repos.cc:1216 src/repos.cc:1290 src/repos.cc:1449 src/repos.cc:1163
#: src/repos.cc:1231 src/repos.cc:1375
#, fuzzy
msgid "Error reading repositories:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"讀取儲存庫時發生錯誤：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"讀取套件庫發生錯誤："

#: src/repos.cc:1244 src/repos.cc:2722 src/repos.cc:1189
#, fuzzy, c-format, boost-format
msgid "Can't open %s for writing."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"無法開啟 %s 以寫入資料。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無法開啟 %s 來寫入。"

#: src/repos.cc:1253 src/repos.cc:2731 src/repos.cc:1196
#, fuzzy, c-format, boost-format
msgid "Repositories have been successfully exported to %s."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫已成功輸出到 %s。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫已成功匯出到 %s。"

#: src/repos.cc:1308 src/repos.cc:1467 src/repos.cc:1248 src/repos.cc:1392
#, fuzzy
msgid "Specified repositories: "
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"指定的儲存庫：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"指定的套件庫： "

#: src/repos.cc:1347 src/repos.cc:1283
#, fuzzy, c-format, boost-format
msgid "Skipping disabled repository '%s'"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"跳過已停用的儲存庫「%s」\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在跳過已停用的套件庫 '%s'"

#: src/repos.cc:1376 src/repos.cc:1310
#, fuzzy
msgid "Specified repositories are not enabled or defined."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"指定的儲存庫尚未啟用或定義。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"指定的套件庫尚未啟用或定義。"

#: src/repos.cc:1378 src/repos.cc:1312
#, fuzzy
msgid "There are no enabled repositories defined."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"尚未定義已啟用的儲存庫。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"尚未定義已啟用的套件庫。"

#: src/repos.cc:1379 src/repos.cc:1313
#, fuzzy, c-format, boost-format
msgid "Use '%s' or '%s' commands to add or enable repositories."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請使用「%s」或「%s」指令新增或啟用儲存庫。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"請用 '%s' 或 '%s' 指令來加入或啟用套件庫。"

#: src/repos.cc:1384 src/repos.cc:1318
#, fuzzy
msgid "Could not refresh the repositories because of errors."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"因發生錯誤無法重新整理儲存庫。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"因發生錯誤無法重新整理套件庫。"

#: src/repos.cc:1390 src/repos.cc:849 src/repos.cc:1324
#, fuzzy
msgid "Some of the repositories have not been refreshed because of an error."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"因發生錯誤，某些儲存庫尚未被重新整理。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"因發生錯誤，某些套件庫尚未被重新整理。"

#: src/repos.cc:1395 src/repos.cc:1329
#, fuzzy
msgid "Specified repositories have been refreshed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"指定的儲存庫已重新整理。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"指定的套件庫已重新整理。"

#: src/repos.cc:1397 src/repos.cc:1331
#, fuzzy
msgid "All repositories have been refreshed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"所有儲存庫已重新整理。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"所有套件庫已重新整理。"

#: src/repos.cc:1524 src/repos.cc:1438
#, fuzzy, c-format, boost-format
msgid "Cleaning metadata cache for '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在清理「%s」的中繼資料快取。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在清除 '%s' 的中繼資料快取。"

#: src/repos.cc:1534 src/repos.cc:1447
#, fuzzy, c-format, boost-format
msgid "Cleaning raw metadata cache for '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在清理「%s」的原始中繼資料快取。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在清除 '%s' 的原始中繼資料快取。"

#: src/repos.cc:1541 src/repos.cc:1453
#, fuzzy, c-format, boost-format
msgid "Keeping raw metadata cache for %s '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"保留 %s「%s」的 raw 中繼資料快取。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在保留 %s 的原始中繼資料快取 '%s'。"

#. translators: meaning the cached rpm files
#: src/repos.cc:1549 src/repos.cc:1460
#, fuzzy, c-format, boost-format
msgid "Cleaning packages for '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在清理「%s」的套件。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在清除 '%s' 的套件。"

#: src/repos.cc:1557 src/repos.cc:1468
#, fuzzy, c-format, boost-format
msgid "Cannot clean repository '%s' because of an error."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"因錯誤無法清理儲存庫「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"因錯誤無法清除套件庫 '%s'。"

#: src/repos.cc:1570 src/repos.cc:1479
#, fuzzy
msgid "Cleaning installed packages cache."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在清理已安裝套件的快取。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在清除已安裝套件的快取。"

#: src/repos.cc:1578 src/repos.cc:1488
#, fuzzy
msgid "Cannot clean installed packages cache because of an error."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"因錯誤無法清理已安裝套件的快取。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"因錯誤無法清除已安裝套件的快取。"

#: src/repos.cc:1599 src/repos.cc:1507
#, fuzzy
msgid "Could not clean the repositories because of errors."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"因發生錯誤無法清理儲存庫。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"因發生錯誤，無法清除套件庫。"

#: src/repos.cc:1606 src/repos.cc:1513
#, fuzzy
msgid "Some of the repositories have not been cleaned up because of an error."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"因發生錯誤，某些儲存庫尚未被清理。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"因發生錯誤，某些套件庫尚未被清理。"

#: src/repos.cc:1611 src/repos.cc:1518
#, fuzzy
msgid "Specified repositories have been cleaned up."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"指定的儲存庫已清理完成。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"指定的套件庫已清理完成。"

#: src/repos.cc:1613 src/repos.cc:1520
#, fuzzy
msgid "All repositories have been cleaned up."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"所有儲存庫已清理完成。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"所有套件庫已清理完成。"

#: src/repos.cc:1656 src/repos.cc:1547
#, fuzzy
msgid "This is a changeable read-only media (CD/DVD), disabling autorefresh."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"這是一個會改變的唯讀媒體 (CD/DVD)，正在停用自動重新整理。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"這是一個可抽換的唯讀媒體 (CD/DVD)，正在停用自動重新整理。"

#: src/repos.cc:1678 src/repos.cc:1568
#, fuzzy, c-format, boost-format
msgid "Invalid repository alias: '%s'"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫別名「%s」無效\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無效的套件庫別名：'%s'"

#: src/repos.cc:1686 src/repos.cc:1991 src/repos.cc:1576 src/repos.cc:1858
#, fuzzy, c-format, boost-format
msgid "Repository named '%s' already exists. Please use another alias."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"名稱為「%s」的儲存庫已存在。請使用其他的別名。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫名稱 '%s' 已存在。請使用其他的別名。"

#: src/repos.cc:1697 src/repos.cc:1585
#, fuzzy
msgid ""
"Could not determine the type of the repository. Please check if the defined "
"URIs (see below) point to a valid repository:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"無法決定儲存庫的類型。請檢查定義的 URI (參看下方) 是否指向有效的儲存庫：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無法決定套件庫的類型。請檢查是否定義的位址 (參看下方) 真的指向一個有效的套件"
"庫："

#: src/repos.cc:1707 src/repos.cc:1591
#, fuzzy
msgid "Can't find a valid repository at given location:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"在指定的位置找不到有效的儲存庫：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"在指定的位置找不到有效的套件庫："

#: src/repos.cc:1716 src/repos.cc:1599
#, fuzzy
msgid "Problem transferring repository data from specified URI:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"由指定的 URI 傳輸儲存庫資料時發生錯誤：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"由指定的位址傳輸套件庫資料時發生錯誤："

#: src/repos.cc:1717 src/repos.cc:1600
#, fuzzy
msgid "Please check whether the specified URI is accessible."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請檢查指定的 URI 是否可存取。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"請檢查指定的位址是否可存取。"

#: src/repos.cc:1725 src/repos.cc:1607
#, fuzzy
msgid "Unknown problem when adding repository:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"新增儲存庫時發生未知的問題：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"新增套件庫時發生未知的問題："

#. translators: BOOST STYLE POSITIONAL DIRECTIVES ( %N% )
#. translators: %1% - a repository name
#: src/repos.cc:1736 src/repos.cc:1617
#, fuzzy, boost-format
msgid ""
"GPG checking is disabled in configuration of repository '%1%'. Integrity and "
"origin of packages cannot be verified."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%1%」的組態中已停用 GPG 檢查。將無法確認套件完整性及來源。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"'%1%' 套件庫設定中已停用 GPG 檢查。將無法驗證套件完整性及來源。"

#: src/repos.cc:1742 src/repos.cc:1622
#, fuzzy, c-format, boost-format
msgid "Repository '%s' successfully added"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"已成功新增儲存庫「%s」\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"已成功新增套件庫 '%s'"

#: src/repos.cc:1770 src/repos.cc:1648
#, fuzzy, c-format, boost-format
msgid "Reading data from '%s' media"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在從媒體「%s」讀取資料\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在從媒體 '%s' 讀取資料"

#: src/repos.cc:1777 src/repos.cc:1654
#, fuzzy, c-format, boost-format
msgid "Problem reading data from '%s' media"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"從媒體「%s」讀取資料時發生問題\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"從媒體 '%s' 讀取資料時發生問題"

#: src/repos.cc:1778 src/repos.cc:1655
#, fuzzy
msgid "Please check if your installation media is valid and readable."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請檢查您的安裝媒體是否有效且可存取。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"請檢查您的安裝媒體是否有效與可讀取。"

#: src/repos.cc:1785 src/repos.cc:1662
#, fuzzy, c-format, boost-format
msgid "Reading data from '%s' media is delayed until next refresh."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"從「%s」媒體讀取資料的操作已延遲到下一次重新整理。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"延遲從媒體 '%s' 讀取資料到下一次的重新整理。"

#: src/repos.cc:1859 src/repos.cc:1744
#, fuzzy
msgid "Problem accessing the file at the specified URI"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"在指定的 URI 存取檔案時發生問題\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"在指定的位址存取檔案時發生問題"

#: src/repos.cc:1860 src/repos.cc:1745
#, fuzzy
msgid "Please check if the URI is valid and accessible."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請檢查指定的 URI 是否有效且可存取。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"請檢查位址是否有效且可存取。"

#: src/repos.cc:1868 src/repos.cc:1752
#, fuzzy
msgid "Problem parsing the file at the specified URI"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"在指定的 URI 解析檔案時發生問題\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"在指定的位址解析檔案時發生問題"

#: src/repos.cc:1893 src/repos.cc:1773
#, fuzzy
msgid "Repository with no alias defined found in the file, skipping."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"檔案中有未指定別名的儲存庫，正在跳過。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"檔案中有未定義別名的套件庫，正在跳過。"

#: src/repos.cc:1900 src/repos.cc:1779
#, fuzzy, c-format, boost-format
msgid "Repository '%s' has no URI defined, skipping."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」未定義 URI，正在跳過。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 未定義位址，正在跳過。"

#: src/repos.cc:1948 src/repos.cc:1821
#, fuzzy, c-format, boost-format
msgid "Repository '%s' has been removed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」已經被移除。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 已經被移除。"

#: src/repos.cc:1974 src/repos.cc:1843
#, fuzzy, c-format, boost-format
msgid ""
"Cannot change alias of '%s' repository. The repository belongs to service "
"'%s' which is responsible for setting its alias."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"無法變更 %s 儲存庫的別名。此儲存庫屬於 %s 服務，此服務才能設定它的別名。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無法變更 '%s' 套件庫的別名。此套件庫屬於 '%s' 服務，此服務才能設定它的別名。"

#: src/repos.cc:1985 src/repos.cc:1854
#, fuzzy, c-format, boost-format
msgid "Repository '%s' renamed to '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」已重新命名為「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 已改名為 '%s'。"

#: src/repos.cc:1997 src/repos.cc:2250 src/repos.cc:1863 src/repos.cc:2097
#, fuzzy
msgid "Error while modifying the repository:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"修改儲存庫時發生錯誤：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"修改套件庫時發生錯誤："

#: src/repos.cc:1998 src/repos.cc:1864
#, fuzzy, c-format, boost-format
msgid "Leaving repository '%s' unchanged."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」維持不變。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 維持不變。"

#: src/repos.cc:2142 src/repos.cc:2001
#, fuzzy, c-format, boost-format
msgid "Repository '%s' priority has been left unchanged (%d)"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」的優先程度維持不變 (%d)\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 的優先權維持不變 (%d)"

#: src/repos.cc:2182 src/repos.cc:2039
#, fuzzy, c-format, boost-format
msgid "Repository '%s' has been successfully enabled."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」已成功啟用。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 已成功啟用。"

#: src/repos.cc:2185 src/repos.cc:2041
#, fuzzy, c-format, boost-format
msgid "Repository '%s' has been successfully disabled."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」已成功停用。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 已成功停用。"

#: src/repos.cc:2193 src/repos.cc:2048
#, fuzzy, c-format, boost-format
msgid "Autorefresh has been enabled for repository '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」已啟用自動重新整理。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 已啟用自動重新整理。"

#: src/repos.cc:2196 src/repos.cc:2050
#, fuzzy, c-format, boost-format
msgid "Autorefresh has been disabled for repository '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」已停用自動重新整理。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 已停用自動重新整理。"

#: src/repos.cc:2204 src/repos.cc:2057
#, fuzzy, c-format, boost-format
msgid "RPM files caching has been enabled for repository '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」已啟用 RPM 檔案快取。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 已啟用 RPM 檔案快取。"

#: src/repos.cc:2207 src/repos.cc:2059
#, fuzzy, c-format, boost-format
msgid "RPM files caching has been disabled for repository '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」已停用 RPM 檔案快取。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 已停用 RPM 檔案快取。"

#: src/repos.cc:2215 src/repos.cc:2066
#, fuzzy, c-format, boost-format
msgid "GPG check has been enabled for repository '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"已對儲存庫「%s」啟用 GPG 檢查。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 已啟用 GPG 檢查。"

#: src/repos.cc:2218 src/repos.cc:2068
#, fuzzy, c-format, boost-format
msgid "GPG check has been disabled for repository '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"已對儲存庫「%s」停用 GPG 檢查。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 已停用 GPG 檢查。"

#: src/repos.cc:2225 src/repos.cc:2074
#, fuzzy, c-format, boost-format
msgid "Repository '%s' priority has been set to %d."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」的優先程度已設為 %d。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 的優先權已被設為 %d。"

#: src/repos.cc:2232 src/repos.cc:2080
#, fuzzy, c-format, boost-format
msgid "Name of repository '%s' has been set to '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」的名稱已設為「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 的名稱已被設為 '%s'。"

#: src/repos.cc:2243 src/repos.cc:2091
#, fuzzy, c-format, boost-format
msgid "Nothing to change for repository '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」將不變更。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 將不變更。"

#: src/repos.cc:2251 src/repos.cc:2098
#, fuzzy, c-format, boost-format
msgid "Leaving repository %s unchanged."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫 %s 維持不變。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 %s 維持不變。"

#: src/repos.cc:2289 src/repos.cc:2130
#, fuzzy
msgid "Error reading services:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"讀取服務時出錯：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"讀取服務發生錯誤："

#: src/repos.cc:2384 src/repos.cc:2219
#, fuzzy, c-format, boost-format
msgid "Service '%s' not found by its alias, number, or URI."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"根據服務別名、編號或 URI 未找到服務「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無法根據服務別名、編號或位址找到服務 '%s'。"

#: src/repos.cc:2388 src/repos.cc:2222
#, fuzzy, c-format, boost-format
msgid "Use '%s' to get the list of defined services."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請使用「%s」獲取已定義服務的清單。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"請用 '%s' 取得已定義的服務清單。"

#: src/repos.cc:2636 src/repos.cc:2464
#, fuzzy, c-format, boost-format
msgid "No services defined. Use the '%s' command to add one or more services."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未定義服務。請使用「%s」指令新增一或多項服務。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"尚未定義服務。請用 '%s' 指令來加入一或多項服務。"

#: src/repos.cc:2758 src/repos.cc:2547
#, fuzzy, c-format, boost-format
msgid "Service aliased '%s' already exists. Please use another alias."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"別名為「%s」的服務已存在。請使用其他別名。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"服務別名 '%s' 已存在。請使用其他的別名。"

#: src/repos.cc:2768 src/repos.cc:2554
#, fuzzy, c-format, boost-format
msgid "Error occured while adding service '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"新增服務「%s」時發生錯誤。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"加入服務 '%s' 發生錯誤。"

#: src/repos.cc:2774 src/repos.cc:2560
#, fuzzy, c-format, boost-format
msgid "Service '%s' has been successfully added."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"已成功新增服務「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"服務 '%s' 已成功加入。"

#: src/repos.cc:2813 src/repos.cc:2598
#, fuzzy, c-format, boost-format
msgid "Removing service '%s':"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在移除服務「%s」︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在移除服務 '%s'："

#: src/repos.cc:2816 src/repos.cc:2601
#, fuzzy, c-format, boost-format
msgid "Service '%s' has been removed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"已移除服務「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"服務 '%s' 已經被移除。"

#: src/repos.cc:2831 src/repos.cc:2615
#, fuzzy, c-format, boost-format
msgid "Refreshing service '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在重新整理服務「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在重新整理服務 '%s'。"

#: src/repos.cc:2847 src/repos.cc:2857 src/repos.cc:2630 src/repos.cc:2640
#, fuzzy, c-format, boost-format
msgid "Problem retrieving the repository index file for service '%s':"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"取回服務「%s」的儲存庫索引檔案時出現問題︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"為服務 '%s' 取得套件庫索引檔案時發生問題："

#: src/repos.cc:2849 src/repos.cc:2962 src/repos.cc:3022 src/repos.cc:2632
#: src/repos.cc:2740 src/repos.cc:2798
#, fuzzy, c-format, boost-format
msgid "Skipping service '%s' because of the above error."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"由於上述錯誤正在跳過服務「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"由於上述錯誤，正在跳過服務 '%s'。"

#: src/repos.cc:2858 src/repos.cc:2642
#, fuzzy
msgid "Check if the URI is valid and accessible."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請檢查 URI 是否有效並可存取。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"請檢查位址是否有效且可存取。"

#: src/repos.cc:2916 src/repos.cc:2699
#, fuzzy, c-format, boost-format
msgid "Skipping disabled service '%s'"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"跳過停用的服務「%s」\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在跳過已停用的服務 '%s'"

#: src/repos.cc:2976 src/repos.cc:2751
#, fuzzy, c-format, boost-format
msgid "Use '%s' or '%s' commands to add or enable services."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請使用「%s」或「%s」指令新增或啟用服務。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"請用 '%s' 或 '%s' 指令來加入或啟用服務。"

#: src/repos.cc:2979 src/repos.cc:2754
#, fuzzy
msgid "Specified services are not enabled or defined."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未啟用或定義指定的服務。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"指定的服務尚未啟用或定義。"

#: src/repos.cc:2981 src/repos.cc:2756
#, fuzzy
msgid "There are no enabled services defined."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未定義已啟用的服務。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"尚未定義已啟用的服務。"

#: src/repos.cc:2985 src/repos.cc:2760
#, fuzzy
msgid "Could not refresh the services because of errors."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"由於出現錯誤，無法重新整理服務。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"因發生錯誤無法重新整理服務。"

#: src/repos.cc:2991 src/repos.cc:2766
#, fuzzy
msgid "Some of the services have not been refreshed because of an error."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"由於出現錯誤，尚未重新整理某些服務。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"因發生錯誤，某些服務尚未被重新整理。"

#: src/repos.cc:2996 src/repos.cc:2771
#, fuzzy
msgid "Specified services have been refreshed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"已重新整理指定的服務。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"指定的服務已重新整理。"

#: src/repos.cc:2998 src/repos.cc:2773
#, fuzzy
msgid "All services have been refreshed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"已重新整理所有服務。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"所有服務已重新整理。"

#: src/repos.cc:3147 src/repos.cc:2920
#, fuzzy, c-format, boost-format
msgid "Service '%s' has been successfully enabled."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"服務「%s」已成功啟用。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"服務 '%s' 已成功啟用。"

#: src/repos.cc:3150 src/repos.cc:2922
#, fuzzy, c-format, boost-format
msgid "Service '%s' has been successfully disabled."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"服務「%s」已成功停用。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"服務 '%s' 已成功停用。"

#: src/repos.cc:3157 src/repos.cc:2928
#, fuzzy, c-format, boost-format
msgid "Autorefresh has been enabled for service '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"已對服務「%s」啟用自動重新整理功能。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"服務 '%s' 已啟用自動重新整理。"

#: src/repos.cc:3160 src/repos.cc:2930
#, fuzzy, c-format, boost-format
msgid "Autorefresh has been disabled for service '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"已對服務「%s」停用自動重新整理功能。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"服務 '%s' 已停用自動重新整理。"

#: src/repos.cc:3166 src/repos.cc:2935
#, fuzzy, c-format, boost-format
msgid "Name of service '%s' has been set to '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"服務「%s」的名稱已設定為「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"服務 '%s' 的名稱已被設為 '%s'。"

#: src/repos.cc:3205 src/repos.cc:2970
#, fuzzy, c-format, boost-format
msgid "Nothing to change for service '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"服務「%s」沒有任何變更。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"服務 '%s' 將不變更。"

#: src/repos.cc:3212 src/repos.cc:2976
#, fuzzy
msgid "Error while modifying the service:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"修改服務時出錯：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"修改服務時發生錯誤："

#: src/repos.cc:3213 src/repos.cc:2977
#, fuzzy, c-format, boost-format
msgid "Leaving service %s unchanged."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"對服務 %s 不做任何變更。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"服務 %s 維持不變。"

#: src/repos.cc:3321 src/repos.cc:3081
#, fuzzy
msgid "Loading repository data..."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在載入儲存庫資料...\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在載入套件庫資料..."

#: src/repos.cc:3343 src/repos.cc:3101
#, fuzzy, c-format, boost-format
msgid "Retrieving repository '%s' data..."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在取回儲存庫 %s 資料...\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在取回套件庫 '%s' 資料..."

#: src/repos.cc:3350 src/repos.cc:3107
#, fuzzy, c-format, boost-format
msgid "Repository '%s' not cached. Caching..."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」沒有快取。快取中...\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 沒有快取。快取中..."

#: src/repos.cc:3357 src/repos.cc:3395 src/repos.cc:3113 src/repos.cc:3147
#, fuzzy, c-format, boost-format
msgid "Problem loading data from '%s'"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"從「%s」載入資料時發生問題\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"從 '%s' 載入資料有問題"

#: src/repos.cc:3362 src/repos.cc:3117
#, fuzzy, c-format, boost-format
msgid "Repository '%s' could not be refreshed. Using old cache."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"無法重新整理儲存庫「%s」。正在使用舊快取。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無法重新整理套件庫 '%s'。正在使用舊快取。"

#: src/repos.cc:3367 src/repos.cc:3400 src/repos.cc:3121 src/repos.cc:3150
#, fuzzy, c-format, boost-format
msgid "Resolvables from '%s' not loaded because of error."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"因為錯誤，由「%s」提供的解決方案無法載入。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"因為錯誤，由 '%s' 提供的解決方案無法載入。"

#: src/repos.cc:3386 src/repos.cc:3138
#, fuzzy, c-format, boost-format
msgid ""
"Repository '%s' appears to be outdated. Consider using a different mirror or "
"server."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」似乎已過時。請考慮使用其他鏡像或伺服器。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 似乎已過期。請考慮使用其他鏡像或伺服器。"

#. translators: the first %s is 'zypper refresh' and the second 'zypper clean -m'
#: src/repos.cc:3397 src/repos.cc:3149
#, fuzzy, c-format, boost-format
msgid "Try '%s', or even '%s' before doing so."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"在您這樣做之前，嘗試「%s」或甚至「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"在您這樣做之前，嘗試 '%s'，或甚至 '%s' 。"

#: src/update.cc:93 src/update.cc:84
#, fuzzy, c-format, boost-format
msgid ""
"Ignoring %s without argument because similar option with an argument has "
"been specified."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"將忽略沒有引數的 %s，因為已指定具有引數的類似選項。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在忽略沒有參數的 %s，因為已指定了帶有參數的類似選項。"

#. translators: package's repository (header)
#: src/update.cc:313 src/update.cc:543 src/search.cc:79 src/search.cc:330
#: src/search.cc:452 src/search.cc:586 src/search.cc:648 src/locks.cc:107
#: src/info.cc:247 src/info.cc:386 src/info.cc:458 src/update.cc:798
#: src/search.cc:74 src/search.cc:378 src/search.cc:512 src/search.cc:571
#: src/utils/misc.cc:249
#, fuzzy
msgid "Repository"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫"

#. #-#-#-#-#  new (zypper)  #-#-#-#-#
#. translator: Table column header.
#. Name
#: src/update.cc:314 src/update.cc:612 src/update.cc:681 src/search.cc:332
#: src/info.cc:314 src/update.cc:350 src/utils/misc.cc:251
#: src/utils/misc.cc:292
#, fuzzy
msgid "Category"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"類別\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"分類"

#: src/update.cc:314 src/update.cc:612 src/update.cc:681 src/search.cc:333
#: src/info.cc:315 src/utils/misc.cc:252 src/utils/misc.cc:293
#, fuzzy
msgid "Severity"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"嚴重性\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"嚴重度"

#: src/update.cc:362 src/update.cc:603
#, fuzzy
msgid "The following software management updates will be installed first:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"將會先安裝下列軟體管理更新︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"下列軟體管理更新將會先被安裝："

#. #-#-#-#-#  new (zypper)  #-#-#-#-#
#. translator: Table headline
#: src/update.cc:377 src/update.cc:621
#, fuzzy
msgid "The following updates are also available:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"下列更新也可用：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"還有下列更新可用："

#: src/update.cc:466 src/update.cc:718
#, fuzzy
msgid "Pattern updates"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"模式更新\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"樣式更新"

#: src/update.cc:730 src/update.cc:977
#, fuzzy
msgid "The following matches in issue numbers have been found:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"已找到以下與問題編號相符的項目：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"已找到下列符合問題編號的項目："

#: src/update.cc:807 src/update.cc:1057
#, fuzzy, c-format, boost-format
msgid "Fix for bugzilla issue number %s was not found or is not needed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"找不到 bugzilla 問題編號 %s 的修復，或不需要該修復。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"Bugzilla 問題編號 %s 的修正未發現或不需要。"

#: src/update.cc:809 src/update.cc:1059
#, fuzzy, c-format, boost-format
msgid "Fix for CVE issue number %s was not found or is not needed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"找不到 CVE 問題編號 %s 的修復，或不需要該修復。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"CVS 問題編號 %s 的修正未發現或不需要。"

#. translators: keep '%s issue' together, it's something like 'CVE issue' or 'Bugzilla issue'
#: src/update.cc:812 src/update.cc:1062
#, fuzzy, c-format, boost-format
msgid "Fix for %s issue number %s was not found or is not needed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未發現 %s 問題編號 %s 的修復或是不需要它。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"%s 問題編號 %s 的修正未發現或不需要。"

#. translators: this will show up if you press ctrl+c twice (but outside of zypper shell)
#: src/main.cc:39 src/main.cc:38
#, fuzzy
msgid "OK OK! Exiting immediately..."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"不要著急！正在結束...\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"好啦好啦！馬上就退出..."

#: src/Zypper.cc:102 src/Zypper.cc:189
#, fuzzy, boost-format
msgid ""
"Legacy commandline option %1% detected. Please use global option %2% instead."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"偵測到使用舊的指令行選項 %1%。請改用全域選項 %2%。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"偵測到舊的指令行選項 %1%。請改用全域選項 %2%。"

#: src/Zypper.cc:103 src/Zypper.cc:190
#, fuzzy, boost-format
msgid "Legacy commandline option %1% detected. Please use %2% instead."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"偵測到使用舊的指令行選項 %1%。請改用 %2%。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"偵測到舊的指令行選項 %1%。請改用 %2%。"

#: src/Zypper.cc:183 src/Zypper.cc:269
#, fuzzy
msgid "Command options:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"指令選項︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"指令選項："

#: src/Zypper.cc:189 src/Zypper.cc:275
#, fuzzy
msgid "This command has no additional options."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"此指令沒有其他選項。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"本指令沒有其他選項。"

#: src/Zypper.cc:302 src/Zypper.cc:428
#, fuzzy
msgid ""
"  Global Options:\n"
"\t--help, -h\t\tHelp.\n"
"\t--version, -V\t\tOutput the version number.\n"
"\t--promptids\t\tOutput a list of zypper's user prompts.\n"
"\t--config, -c <file>\tUse specified config file instead of the default.\n"
"\t--userdata <string>\tUser defined transaction id used in history and "
"plugins.\n"
"\t--quiet, -q\t\tSuppress normal output, print only error\n"
"\t\t\t\tmessages.\n"
"\t--verbose, -v\t\tIncrease verbosity.\n"
"\t--[no-]color\t\tWhether to use colors in output if tty supports it.\n"
"\t--no-abbrev, -A\t\tDo not abbreviate text in tables.\n"
"\t--table-style, -s\tTable style (integer).\n"
"\t--non-interactive, -n\tDo not ask anything, use default answers\n"
"\t\t\t\tautomatically.\n"
"\t--non-interactive-include-reboot-patches\n"
"\t\t\t\tDo not treat patches as interactive, which have\n"
"\t\t\t\tthe rebootSuggested-flag set.\n"
"\t--xmlout, -x\t\tSwitch to XML output.\n"
"\t--ignore-unknown, -i\tIgnore unknown packages.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"  全域選項︰\n"
"\t--help、-h\t\t顯示說明訊息。\n"
"\t--version、-V\t\t輸出版本號碼。\n"
"\t--promptids\t\t輸出 zypper 使用者提示清單。\n"
"\t--config、-c <檔案>\t使用指定的設定檔，而非預設的設定檔。\n"
"\t--userdata <字串>\t在歷程及外掛程式中使用定義的異動 ID。\n"
"\t--quiet、-q\t\t隱藏正常訊息輸出，\n"
"\t\t\t\t僅列印錯誤訊息。\n"
"\t--verbose、-v\t\t增加訊息詳細度。\n"
"\t--[no-]color\t\t若 tty 支援，設定是否在訊息中顯示顏色。\n"
"\t--no-abbrev、-A\t\t在表格中不要使用縮寫文字。\n"
"\t--table-style、-s\t設定表格風格 (整數)。\n"
"\t--non-interactive、-n\t不要提示選擇，\n"
"\t\t\t\t自動使用預設的答案。\n"
"\t--non-interactive-include-reboot-patches\n"
"\t\t\t\t對於旗標設定為 rebootSuggested 的修補程式，\n"
"\t\t\t\t也不要提示選擇。\n"
"\t--xmlout、-x\t\t切換為 XML 輸出。\n"
"\t--ignore-unknown、-i\t忽略未知的套件。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"  全域選項:\n"
"\t--help, -h\t\t顯示說明訊息。\n"
"\t--version, -V\t\t顯示版本號。\n"
"\t--promptids\t\t顯示 zypper 使用者提示清單。\n"
"\t--config, -c <檔案>\t使用指定的設定檔，而非預設的設定檔。\n"
"\t--userdata <字串>\t在歷史記錄及外掛程式中使用定義的事務 ID。\n"
"\t--quiet, -q\t\t隱藏正常訊息輸出，僅顯示錯誤訊息。\n"
"\t--verbose, -v\t\t顯示更詳細的訊息。\n"
"\t--[no-]color\t\t若 tty 支援，設定是否顯示顏色在訊息中。\n"
"\t--no-abbrev, -A\t\t在表格中不要使用縮寫文字。\n"
"\t--table-style, -s\t設定表格風格 (整數)。\n"
"\t--non-interactive, -n\t不要提示選擇，自動使用預設的答案。\n"
"\t--non-interactive-include-reboot-patches\n"
"\t\t\t\t對於旗標設定為 rebootSuggested 的修補程式，也\n"
"\t\t\t\t不要提示選擇。\n"
"\t--xmlout, -x\t\t切換為 XML 輸出。\n"
"\t--ignore-unknown, -i\t忽略未知的套件。\n"

#: src/Zypper.cc:324 src/Zypper.cc:450
#, fuzzy
msgid ""
"\t--reposd-dir, -D <dir>\tUse alternative repository definition file\n"
"\t\t\t\tdirectory.\n"
"\t--cache-dir, -C <dir>\tUse alternative directory for all caches.\n"
"\t--raw-cache-dir <dir>\tUse alternative raw meta-data cache directory.\n"
"\t--solv-cache-dir <dir>\tUse alternative solv file cache directory.\n"
"\t--pkg-cache-dir <dir>\tUse alternative package cache directory.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"\t--reposd-dir、-D <目錄>\t使用替代儲存庫定義檔\n"
"\t\t\t\t目錄。\n"
"\t--cache-dir、-C <目錄>\t對所有快取使用替代目錄。\n"
"\t--raw-cache-dir <目錄>\t使用替代原始中繼資料快取目錄。\n"
"\t--solv-cache-dir <目錄>\t使用替代 solv 檔案快取目錄。\n"
"\t--pkg-cache-dir <目錄>\t使用替代套件快取目錄。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"\t--reposd-dir， -D <dir>\t使用不同的套件庫定義檔\n"
"\t\t\t\t目錄。\n"
"\t--cache-dir， -C <dir>\t對所有快取均使用不同的目錄。\n"
"\t--raw-cache-dir <dir>\t使用不同的原始中繼資料快取的目錄。\n"
"\t--solv-cache-dir <dir>\t使用不同的解決方案檔案快取目錄。\n"
"\t--pkg-cache-dir <dir>\t使用不同的套件快取目錄。\n"

#: src/Zypper.cc:332 src/Zypper.cc:458
#, fuzzy
msgid ""
"     Repository Options:\n"
"\t--no-gpg-checks\t\tIgnore GPG check failures and continue.\n"
"\t--gpg-auto-import-keys\tAutomatically trust and import new repository\n"
"\t\t\t\tsigning keys.\n"
"\t--plus-repo, -p <URI>\tUse an additional repository.\n"
"\t--plus-content <tag>\tAdditionally use disabled repositories providing a "
"specific keyword.\n"
"\t\t\t\tTry '--plus-content debug' to enable repos indicating to provide "
"debug packages.\n"
"\t--disable-repositories\tDo not read meta-data from repositories.\n"
"\t--no-refresh\t\tDo not refresh the repositories.\n"
"\t--no-cd\t\t\tIgnore CD/DVD repositories.\n"
"\t--no-remote\t\tIgnore remote repositories.\n"
"\t--releasever\t\tSet the value of $releasever in all .repo files (default: "
"distribution version)\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"     儲存庫選項︰\n"
"\t--no-gpg-checks\t\t忽略 GPG 檢查錯誤並繼續。\n"
"\t--gpg-auto-import-keys\t自動信任並輸入\n"
"\t\t\t\t新的儲存庫簽名。\n"
"\t--plus-repo、-p <URI>\t使用額外的儲存庫。\n"
"\t--plus-content <標記>\t使用提供特定關鍵字的已停用儲存庫。\n"
"\t\t\t\t嘗試「--plus-content debug」來啟用表示可提供除錯套件的儲存庫。\n"
"\t--disable-repositories\t不要從儲存庫讀取中繼資料。\n"
"\t--no-refresh\t\t不要重新整理儲存庫。\n"
"\t--no-cd\t\t\t忽略 CD/DVD 儲存庫。\n"
"\t--no-remote\t\t忽略遠端儲存庫。\n"
"\t--releasever\t\t在所有 .repo 檔案中設定 $releasever 的值 (預設︰套裝作業系"
"統版本)\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"     套件庫選項:\n"
"\t--no-gpg-checks\t\t忽略 GPG 檢查錯誤並繼續。\n"
"\t--gpg-auto-import-keys\t自動信任並匯入新的套件庫簽章金鑰。\n"
"\t--plus-repo, -p <URI>\t使用額外的套件庫。\n"
"\t--plus-content <tag>\t另外使用提供特定關鍵字的被停用套件庫。\n"
"\t\t\t\t嘗試 '--plus-content debug' 來啟用有提供除錯套件的套件庫。\n"
"\t--disable-repositories\t不要從套件庫讀取中繼資料。\n"
"\t--no-refresh\t\t不要重新整理套件庫。\n"
"\t--no-cd\t\t\t忽略 CD/DVD 套件庫。\n"
"\t--no-remote\t\t忽略遠端套件庫。\n"
"\t--releasever\t\t在所有 .repo 檔案中設定 $releasever 的值 (預設︰發行版的版"
"本)\n"

#: src/Zypper.cc:346 src/Zypper.cc:472
#, fuzzy
msgid ""
"     Target Options:\n"
"\t--root, -R <dir>\tOperate on a different root directory.\n"
"\t--disable-system-resolvables\n"
"\t\t\t\tDo not read installed packages.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"     目標選項：\n"
"\t--root, -R <dir>\t在不同的根目錄操作。\n"
"\t--disable-system-resolvables\n"
"\t\t\t\t不讀取已安裝的套件。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"     目標選項：\n"
"\t--root， -R <dir>\t在不同的根目錄操作。\n"
"\t--disable-system-resolvables\n"
"\t\t\t\t不要讀取已安裝的套件。\n"

#: src/Zypper.cc:353 src/Zypper.cc:479
#, fuzzy
msgid ""
"  Commands:\n"
"\thelp, ?\t\t\tPrint help.\n"
"\tshell, sh\t\tAccept multiple commands at once.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"  指令：\n"
"\thelp、?\t\t\t列印說明。\n"
"\tshell、sh\t\t同時接受多重指令。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"  指令：\n"
"\thelp, ?\t\t\t印出說明。\n"
"\tshell, sh\t\t同時接受多重指令。\n"

#: src/Zypper.cc:358 src/Zypper.cc:484
#, fuzzy
msgid ""
"     Repository Management:\n"
"\trepos, lr\t\tList all defined repositories.\n"
"\taddrepo, ar\t\tAdd a new repository.\n"
"\tremoverepo, rr\t\tRemove specified repository.\n"
"\trenamerepo, nr\t\tRename specified repository.\n"
"\tmodifyrepo, mr\t\tModify specified repository.\n"
"\trefresh, ref\t\tRefresh all repositories.\n"
"\tclean\t\t\tClean local caches.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"     儲存庫管理：\n"
"\trepos, lr\t\t列出所有已定義的儲存庫。\n"
"\taddrepo, ar\t\t新增一個新的儲存庫。\n"
"\tremoverepo, rr\t\t移除指定的儲存庫。\n"
"\trenamerepo, nr\t\t重新命名指定的儲存庫。\n"
"\tmodifyrepo, mr\t\t修改指定的儲存庫。\n"
"\trefresh, ref\t\t重新整理所有儲存庫。\n"
"\tclean\t\t\t清理本地快取。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"     套件庫管理：\n"
"\trepos, lr\t\t列出所有已定義的套件庫。\n"
"\taddrepo, ar\t\t加入一個新的套件庫。\n"
"\tremoverepo, rr\t\t移除指定的套件庫。\n"
"\trenamerepo, nr\t\t更名指定的套件庫。\n"
"\tmodifyrepo, mr\t\t修改指定的套件庫。\n"
"\trefresh, ref\t\t重新整理所有套件庫。\n"
"\tclean\t\t\t清理本機快取。\n"

#: src/Zypper.cc:368 src/Zypper.cc:494
#, fuzzy
msgid ""
"     Service Management:\n"
"\tservices, ls\t\tList all defined services.\n"
"\taddservice, as\t\tAdd a new service.\n"
"\tmodifyservice, ms\tModify specified service.\n"
"\tremoveservice, rs\tRemove specified service.\n"
"\trefresh-services, refs\tRefresh all services.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"     服務管理︰\n"
"\tservices, ls\t\t列出所有定義的服務。\n"
"\taddservice, as\t\t新增一項新的服務。\n"
"\tmodifyservice, ms\t修改指定的服務。\n"
"\tremoveservice, rs\t移除指定的服務。\n"
"\trefresh-services, refs\t重新整理所有服務。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"     服務管理：\n"
"\tservices, ls\t\t列出所有已定義的服務。\n"
"\taddservice, as\t\t加入一個新的服務。\n"
"\tmodifyservice, ms\t修改指定的服務。\n"
"\tremoveservice, rs\t移除指定的服務。\n"
"\trefresh-services, refs\t重新整理所有的服務。\n"

#: src/Zypper.cc:376 src/Zypper.cc:502
#, fuzzy
msgid ""
"     Software Management:\n"
"\tinstall, in\t\tInstall packages.\n"
"\tremove, rm\t\tRemove packages.\n"
"\tverify, ve\t\tVerify integrity of package dependencies.\n"
"\tsource-install, si\tInstall source packages and their build\n"
"\t\t\t\tdependencies.\n"
"\tinstall-new-recommends, inr\n"
"\t\t\t\tInstall newly added packages recommended\n"
"\t\t\t\tby installed packages.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"     軟體管理：\n"
"\tinstall, in\t\t安裝套件。\n"
"\tremove, rm\t\t移除套件。\n"
"\tverify, ve\t\t確認套件相依性的完整性。\n"
"\tsource-install, si\t安裝原始碼套件和其建構所需\n"
"\t\t\t\t相依性。\n"
"\tinstall-new-recommends, inr\n"
"\t\t\t\t安裝已安裝套件所建議\n"
"\t\t\t\t的新增套件。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"     軟體管理：\n"
"\tinstall, in\t\t安裝套件。\n"
"\tremove, rm\t\t移除套件。\n"
"\tverify, ve\t\t確認套件相依完整性。\n"
"\tsource-install, si\t安裝原始碼套件和其建構所需\n"
"\t\t\t\t的相依性套件。\n"
"\tinstall-new-recommends, inr\n"
"\t\t\t\t安裝已安裝套件所建議\n"
"\t\t\t\t的新套件。\n"

#: src/Zypper.cc:387 src/Zypper.cc:513
#, fuzzy
msgid ""
"     Update Management:\n"
"\tupdate, up\t\tUpdate installed packages with newer versions.\n"
"\tlist-updates, lu\tList available updates.\n"
"\tpatch\t\t\tInstall needed patches.\n"
"\tlist-patches, lp\tList needed patches.\n"
"\tdist-upgrade, dup\tPerform a distribution upgrade.\n"
"\tpatch-check, pchk\tCheck for patches.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"     更新管理：\n"
"\tupdate, up\t\t使用較新版本更新已安裝的套件。\n"
"\tlist-updates, lu\t列出可用的更新。\n"
"\tpatch\t\t\t安裝所需的修補程式。\n"
"\tlist-patches, lp\t列出所需的修補程式。\n"
"\tdist-upgrade, dup\t執行套裝作業系統升級。\n"
"\tpatch-check, pchk\t檢查有無修補程式。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"     更新管理：\n"
"\tupdate, up\t\t使用較新版本更新已安裝的套件。\n"
"\tlist-updates, lu\t列出可用的更新。\n"
"\tpatch\t\t\t安裝所需的修補程式。\n"
"\tlist-patches, lp\t列出所需的修補程式。\n"
"\tdist-upgrade, dup\t進行一個發行版本升級。\n"
"\tpatch-check, pchk\t檢查有無修補程式。\n"

#: src/Zypper.cc:396 src/Zypper.cc:522
#, fuzzy
msgid ""
"     Querying:\n"
"\tsearch, se\t\tSearch for packages matching a pattern.\n"
"\tinfo, if\t\tShow full information for specified packages.\n"
"\tpatch-info\t\tShow full information for specified patches.\n"
"\tpattern-info\t\tShow full information for specified patterns.\n"
"\tproduct-info\t\tShow full information for specified products.\n"
"\tpatches, pch\t\tList all available patches.\n"
"\tpackages, pa\t\tList all available packages.\n"
"\tpatterns, pt\t\tList all available patterns.\n"
"\tproducts, pd\t\tList all available products.\n"
"\twhat-provides, wp\tList packages providing specified capability.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"     查詢：\n"
"\tsearch, se\t\t搜尋符合樣式的套件。\n"
"\tinfo, if\t\t顯示指定套件的完整資訊。\n"
"\tpatch-info\t\t顯示指定修補程式的完整資訊。\n"
"\tpattern-info\t\t顯示指定樣式的完整資訊。\n"
"\tproduct-info\t\t顯示指定產品的完整資訊。\n"
"\tpatches, pch\t\t列出所有可用的修補程式。\n"
"\tpackages, pa\t\t列出所有可用套件。\n"
"\tpatterns, pt\t\t列出所有可用樣式。\n"
"\tproducts, pd\t\t列出所有可用產品。\n"
"\twhat-provides, wp\t列出提供指定功能的套件。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"     查詢：\n"
"\tsearch, se\t\t搜尋符合樣式的套件。\n"
"\tinfo, if\t\t顯示指定套件的完整資訊。\n"
"\tpatch-info\t\t顯示指定修補程式的完整資訊。\n"
"\tpattern-info\t\t顯示指定樣式的完整資訊。\n"
"\tproduct-info\t\t顯示指定產品的完整資訊。\n"
"\tpatches, pch\t\t列出所有可用的修補程式。\n"
"\tpackages, pa\t\t列出所有可用的套件。\n"
"\tpatterns, pt\t\t列出所有可用的樣式。\n"
"\tproducts, pd\t\t列出所有可用的產品。\n"
"\twhat-provides, wp\t列出提供指定功能的套件。\n"

#: src/Zypper.cc:411 src/Zypper.cc:537
#, fuzzy
msgid ""
"     Package Locks:\n"
"\taddlock, al\t\tAdd a package lock.\n"
"\tremovelock, rl\t\tRemove a package lock.\n"
"\tlocks, ll\t\tList current package locks.\n"
"\tcleanlocks, cl\t\tRemove unused locks.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"     套件鎖定：\n"
"\taddlock、al\t\t新增一個套件鎖定。\n"
"\tremovelock、rl\t\t移除一個套件鎖定。\n"
"\tlocks、ll\t\t列出目前的套件鎖定。\n"
"\tcleanlocks、cl\t\t移除未使用的鎖定。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"     套件鎖定：\n"
"\taddlock, al\t\t加入一個套件鎖定。\n"
"\tremovelock, rl\t\t解除一個套件鎖定。\n"
"\tlocks, ll\t\t列出目前的套件鎖定。\n"
"\tcleanlocks, cl\t\t移除未使用的鎖定。\n"

#: src/Zypper.cc:418 src/Zypper.cc:544
#, fuzzy
msgid ""
"     Other Commands:\n"
"\tversioncmp, vcmp\tCompare two version strings.\n"
"\ttargetos, tos\t\tPrint the target operating system ID string.\n"
"\tlicenses\t\tPrint report about licenses and EULAs of\n"
"\t\t\t\tinstalled packages.\n"
"\tdownload\t\tDownload rpms specified on the commandline to a local "
"directory.\n"
"\tsource-download\t\tDownload source rpms for all installed packages\n"
"\t\t\t\tto a local directory.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"     其他指令：\n"
"\tversioncmp、vcmp\t比較兩個版本字串。\n"
"\ttargetos、tos\t\t列印目標作業系統 ID 字串。\n"
"\tlicenses\t\t列印關於已安裝套件之授權\n"
"\t\t\t\t與 EULA 的報告。\n"
"\tdownload\t\t將指令行上指定的 rpm 下載到本地目錄。\n"
"\tsource-download\t\t將所有已安裝套件的來源 rpm \n"
"\t\t\t\t都下載到本地目錄。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"     其他指令：\n"
"\tversioncmp, vcmp\t比較兩個版本字串。\n"
"\ttargetos, tos\t\t印出目標作業系統 ID 字串。\n"
"\tlicenses\t\t印出關於已安裝套件的授權\n"
"\t\t\t\t與終端使用者協議 (EULA) 的報告。\n"
"\tdownload\t\t下載指令行上指定的 rpm 到本地目錄。\n"
"\tsource-download\t\t下載所有已安裝套件的原始碼 rpm\n"
"\t\t\t\t到本地目錄。\n"

#: src/Zypper.cc:428 src/Zypper.cc:554
#, fuzzy
msgid ""
"     Subcommands:\n"
"\tsubcommand\t\tLists available subcommands.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"     子指令：\n"
"\tsubcommand\t\t列出可用的子指令。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"     個別指令：\n"
"\tsubcommand\t\t列出可用的個別指令。\n"

#: src/Zypper.cc:433 src/Zypper.cc:559
#, fuzzy
msgid ""
"  Usage:\n"
"\tzypper [--global-options] <command> [--command-options] [arguments]\n"
"\tzypper <subcommand> [--command-options] [arguments]\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"  用法：\n"
"\tzypper [--全域選項] <指令> [--指令選項] [引數]\n"
"\tzypper <子指令> [--指令選項] [引數]\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"  用法：\n"
"\tzypper [--全域選項] <指令> [--指令選項] [參數]\n"
"\tzypper <個別指令> [--指令選項] [參數]\n"

#. translators: %s is "help" or "zypper help" depending on whether
#. zypper shell is running or not
#: src/Zypper.cc:461 src/Zypper.cc:587
#, fuzzy, c-format, boost-format
msgid "Type '%s' to get a list of global options and commands."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"鍵入「%s」以獲取全域選項與指令的清單。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"輸入 '%s' 以獲取全域選項與指令的清單。"

#. translators: %s is "help" or "zypper help" depending on whether
#. zypper shell is running or not
#: src/Zypper.cc:470 src/Zypper.cc:596
#, fuzzy, c-format, boost-format
msgid "Type '%s' to get command-specific help."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"鍵入「%s」以獲取個別指令的說明。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"輸入 '%s' 以獲取個別指令的說明。"

#: src/Zypper.cc:646 src/Zypper.cc:771
#, fuzzy, c-format, boost-format
msgid "Verbosity: %d"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"詳細度：%d\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"詳細：%d"

#: src/Zypper.cc:660 src/Zypper.cc:785
#, fuzzy, c-format, boost-format
msgid "Invalid table style %d."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"無效的表樣式 %d。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無效的表格樣式 %d。"

#. translators: %1%  - is the name of a subcommand
#: src/Zypper.cc:773 src/Zypper.cc:898
#, fuzzy, boost-format
msgid "Subcommand %1% does not support zypper global options."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"子指令 %1% 不支援 zypper 全域選項。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"個別指令 %1% 不支援 zypper 全域選項。"

#: src/Zypper.cc:834 src/Zypper.cc:960
#, fuzzy
msgid ""
"Patches having the flag rebootSuggested set will not be treated as "
"interactive."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"設定了 rebootSuggested 旗標的修補程式不會視為互動項目。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"對於有建議重開機旗標的修補程式將不會被視為可互動的。"

#: src/Zypper.cc:840 src/Zypper.cc:967
#, fuzzy
msgid "Entering 'no-gpg-checks' mode."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"進入「no-gpg-checks」模式。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在進入忽略 GPG 檢查模式。"

#: src/Zypper.cc:847 src/Zypper.cc:975
#, fuzzy, c-format, boost-format
msgid ""
"Turning on '%s'. New repository signing keys will be automatically imported!"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在開啟「%s」。將自動輸入新的儲存庫簽署金鑰！\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在開啟 '%s'。新套件庫簽名金鑰將自動被匯入！"

#: src/Zypper.cc:876 src/Zypper.cc:1004
#, fuzzy
msgid ""
"The /etc/products.d/baseproduct symlink is dangling or missing!\n"
"The link must point to your core products .prod file in /etc/products.d.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"「/etc/products.d/baseproduct」符號連結懸空或遺失！\n"
"該連結必須指向 /etc/products.d 中您的核心產品 .prod 檔案。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"符號連結 /etc/products.d/baseproduct 指向目標不存在或連結本身已遺失！\n"
"該連結必須要指向您在 /etc/products.d 的核心產品 .prod 檔案。\n"

#: src/Zypper.cc:915 src/Zypper.cc:1044
#, fuzzy
msgid "Repositories disabled, using the database of installed packages only."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫已停用，僅使用已安裝套件的資料庫。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫已停用，僅使用已安裝套件的資料庫。"

#: src/Zypper.cc:934 src/Zypper.cc:1063
#, fuzzy
msgid "CD/DVD repositories disabled."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"CD/DVD 儲存庫已停用。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"CD/DVD 套件庫停用。"

#: src/Zypper.cc:941 src/Zypper.cc:1070
#, fuzzy
msgid "Remote repositories disabled."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"已停用遠端儲存庫。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"遠端套件庫停用。"

#: src/Zypper.cc:948 src/Zypper.cc:1077
#, fuzzy
msgid "Ignoring installed resolvables."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"忽略已安裝的可解析項目。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"忽略已安裝的解決方案。"

#. TranslatorExplanation The %s is "--plus-repo"
#. TranslatorExplanation The %s is "--option-name"
#: src/Zypper.cc:976 src/Zypper.cc:1026 src/Zypper.cc:1104 src/Zypper.cc:1151
#, fuzzy, c-format, boost-format
msgid "The %s option has no effect here, ignoring."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"%s 選項在此無效，正在忽略。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"%s 選項在此無效，將忽略。"

#: src/Zypper.cc:1186 src/Zypper.cc:1313
#, fuzzy, c-format, boost-format
msgid "Command '%s' is replaced by '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"指令「%s」已由「%s」取代。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"指令 '%s' 已由 '%s' 取代。"

#: src/Zypper.cc:1188 src/Zypper.cc:1314
#, fuzzy, c-format, boost-format
msgid "See '%s' for all available options."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"參閱「%s」查看所有可用的選項。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"參閱 '%s' 查看所有可用的選項。"

#. translators: the first %s = "package, patch, pattern, product",
#. second %s = "package",
#. and the third %s = "only, in-advance, in-heaps, as-needed"
#: src/Zypper.cc:1325 src/Zypper.cc:1454
#, fuzzy, c-format, boost-format
msgid ""
"install (in) [options] <capability|rpm_file_uri> ...\n"
"\n"
"Install packages with specified capabilities or RPM files with specified\n"
"location. A capability is NAME[.ARCH][OP<VERSION>], where OP is one\n"
"of <, <=, =, >=, >.\n"
"\n"
"  Command options:\n"
"    --from <alias|#|URI>    Select packages from the specified repository.\n"
"-r, --repo <alias|#|URI>    Load only the specified repository.\n"
"-t, --type <type>           Type of package (%s).\n"
"                            Default: %s.\n"
"-n, --name                  Select packages by plain name, not by "
"capability.\n"
"-C, --capability            Select packages by capability.\n"
"-f, --force                 Install even if the item is already installed "
"(reinstall),\n"
"                            downgraded or changes vendor or architecture.\n"
"    --oldpackage            Allow to replace a newer item with an older "
"one.\n"
"                            Handy if you are doing a rollback. Unlike --"
"force\n"
"                            it will not enforce a reinstall.\n"
"    --replacefiles          Install the packages even if they replace files "
"from other,\n"
"                            already installed, packages. Default is to treat "
"file conflicts\n"
"                            as an error. --download-as-needed disables the "
"fileconflict check.\n"
"-l, --auto-agree-with-licenses\n"
"                            Automatically say 'yes' to third party license\n"
"                            confirmation prompt.\n"
"                            See 'man zypper' for more details.\n"
"    --debug-solver          Create solver test case for debugging.\n"
"    --no-recommends         Do not install recommended packages, only "
"required.\n"
"    --recommends            Install also recommended packages in addition\n"
"                            to the required.\n"
"-R, --no-force-resolution   Do not force the solver to find solution,\n"
"                            let it ask.\n"
"    --force-resolution      Force the solver to find a solution (even\n"
"                            an aggressive one).\n"
"-D, --dry-run               Test the installation, do not actually install.\n"
"    --details               Show the detailed installation summary.\n"
"    --download              Set the download-install mode. Available modes:\n"
"                            %s\n"
"-d, --download-only         Only download the packages, do not install.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"install (in) [選項] <功能|rpm 檔案 uri> ...\n"
"\n"
"安裝具有指定功能的套件或指定位置\n"
"的 RPM 檔案。功能是指 NAME[.ARCH][OP<VERSION>]，其中 OP 為以下運算子之一︰\n"
"<、<=、=、>=、>。\n"
"\n"
"指令選項︰\n"
"    --from <別名|編號|URI>    從指定的儲存庫選取套件。\n"
"-r、-repo <別名|編號|URI>    僅載入指定的儲存庫。\n"
"-t、--type <類型>               套件的類型 (%s)。\n"
"                                預設值：%s。\n"
"-n、--name                      單純依照名稱而不是功能來選取套件。\n"
"-C、--capability                依照功能來選取套件。\n"
"-f、--force                     強制安裝，即使該項目已安裝 (重新安裝)、\n"
"                            降級或者會變更廠商或架構。\n"
"    --replacefiles          安裝套件，即使它們會取代其他\n"
"                            已安裝套件中的檔案。預設設定為將檔案衝突\n"
"                            視為錯誤。使用 --download-as-needed 可停用檔案衝"
"突檢查。\n"
"    --oldpackage            允許以舊項目取代新項目。\n"
"                            如果要執行復原，則該選項非常方便。和 --force 不"
"同，\n"
"                            它不會強制執行重新安裝。\n"
"-l、--auto-agree-with-licenses\n"
"                            對協力廠商授權確認\n"
"提示自動選取「是」。\n"
"                            請參閱「man zypper」以取得詳細資料。\n"
"    --debug-solver              建立解析程式測試個案以用於除錯。\n"
"    --no-recommends             不安裝推薦的套件，只安裝需要的套件。\n"
"    --recommends            除需要的套件外，\n"
"                            還安裝推薦的套件。\n"
"-R、--no-force-resolution       不強制解析程式尋找解決方案，\n"
"                            要先詢問。\n"
"    --force-resolution          強制解析程式尋找解決方案 (即使\n"
"                            該方案具有侵略性)。\n"
"-D、--dry-run                   測試安裝，不真正安裝。\n"
"    --details               顯示詳細安裝摘要。\n"
"    --download              設定下載安裝模式。可用模式為︰\n"
"                            %s\n"
"-d、--download-only         只下載套件，不進行安裝。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"install (in) [選項] <功能|rpm_檔案_位址> ...\n"
"\n"
"安裝具有指定功能的套件或指定位置\n"
"的 RPM 檔案。功能是指名稱[.ARCH][OP<版本>]，其中 OP 為以下運算子之一：\n"
"<、<=、=、>=、>。\n"
"\n"
"  指令選項：\n"
"    --from <別名|編號|位址>    從指定的套件庫選取套件。\n"
"-r, --repo <別名|編號|位址>    僅載入指定的套件庫。\n"
"-t, --type <類型>              套件的類型 (%s)。\n"
"                               預設：%s。\n"
"-n, --name                     單純依照名稱而不是功能來選取套件。 \n"
"-C, --capability               依照功能來選取套件。\n"
"-f, --force                    安裝套件，即使該套件已安裝 (重新安裝)、\n"
"                               已降級、或已變更供應商或架構。\n"
"    --oldpackage               允許使用舊版本取代新版本。\n"
"                               如果您要回復到舊版本，該選項是個方便的功能。不"
"像 --force，\n"
"                               它不會強迫重新安裝。\n"
"    --replacefiles             安裝套件，即使它會取代來自其他已安裝套件的檔"
"案。\n"
"                               預設將檔案衝突視為錯誤來處理。\n"
"                               使用 --download-as-needed 選項來停用檔案衝突檢"
"查。\n"
"-l, --auto-agree-with-licenses\n"
"                               對第三方授權確認提示自動\n"
"                               選取「是」。\n"
"                               請參閱 'man zypper' 以獲得更多資訊。\n"
"    --debug-solver             建立解決測試案例來偵錯\n"
"    --no-recommends            不要安裝推薦的套件，只安裝必需的。\n"
"    --recommends               除了必需的套件外，\n"
"                               也安裝推薦的。\n"
"-R, --no-force-resolution      不要強迫找尋解決方案，\n"
"                               要先詢問。\n"
"    --force-resolution         強迫找尋一個解決方案 (即使\n"
"                               是很激進的方案)。\n"
"-D, --dry-run                  測試安裝，不要實際安裝。\n"
"    --details                  顯示詳細的安裝摘要。\n"
"    --download                 設定下載-安裝模式。可用的模式：\n"
"                               %s\n"
"-d, --download-only            僅下載套件，不要安裝。\n"

#. TranslatorExplanation the first %s = "package, patch, pattern, product"
#. and the second %s = "package"
#: src/Zypper.cc:1396 src/Zypper.cc:1528
#, fuzzy, c-format, boost-format
msgid ""
"remove (rm) [options] <capability> ...\n"
"\n"
"Remove packages with specified capabilities.\n"
"A capability is NAME[.ARCH][OP<VERSION>], where OP is one\n"
"of <, <=, =, >=, >.\n"
"\n"
"  Command options:\n"
"-r, --repo <alias|#|URI>    Load only the specified repository.\n"
"-t, --type <type>           Type of package (%s).\n"
"                            Default: %s.\n"
"-n, --name                  Select packages by plain name, not by "
"capability.\n"
"-C, --capability            Select packages by capability.\n"
"    --debug-solver          Create solver test case for debugging.\n"
"-R, --no-force-resolution   Do not force the solver to find solution,\n"
"                            let it ask.\n"
"    --force-resolution      Force the solver to find a solution (even\n"
"                            an aggressive one).\n"
"-u, --clean-deps            Automatically remove unneeded dependencies.\n"
"-U, --no-clean-deps         No automatic removal of unneeded dependencies.\n"
"-D, --dry-run               Test the removal, do not actually remove.\n"
"    --details               Show the detailed installation summary.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"remove (rm) [選項] <功能> ...\n"
"\n"
"移除具有指定功能的套件。\n"
"功能是指 NAME[.ARCH][OP<VERSION>]，其中 OP 為以下運算子之一：\n"
"<、<=、=、>=、>。\n"
"\n"
"指令選項︰\n"
"-r、--repo <別名|編號|URI>    僅載入指定的儲存庫。\n"
"-t、--type <類型>               套件 (%s) 的類型。\n"
"                                預設值：%s。\n"
"-n、--name                      單純依照名稱而不是功能來選取套件。\n"
"-C、--capability                依照功能來選取套件。\n"
"    --debug-solver              建立解析程式測試個案以用於除錯。\n"
"-R、--no-force-resolution       不強制解析程式尋找解決方案，\n"
"                            要先詢問。\n"
"    --force-resolution          強制解析程式尋找解決方案 (即使\n"
"                            該方案具有侵略性)。\n"
"-u、--clean-deps            自動移除不需要的相依項。\n"
"-U、--no-clean-deps         不自動移除不需要的相依項。\n"
"-D、--dry-run                   測試移除，不真正移除。\n"
"    --details               顯示詳細安裝摘要。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"remove (rm) [選項] <功能> ...\n"
"\n"
"移除具有指定功能的套件。\n"
"功能是名稱[.ARCH][OP<版本>]，其中 OP 為以下運算子之一：\n"
"<、<=、=、>=、>。\n"
"\n"
"  指令選項：\n"
"-r, --repo <別名|編號|位址>   僅載入指定的套件庫。\n"
"-t, --type <類型>             套件的類型 (%s)\n"
"                              預設：%s\n"
"-n, --name                    單純依照名稱而不是功能來選取套件。 \n"
"-C, --capability              依照功能來選取套件。\n"
"    --debug-solver            建立解決測試案例來偵錯。\n"
"-R, --no-force-resolution     不要強迫找尋解決方案，\n"
"                              要先詢問。\n"
"    --force-resolution        強迫找尋一個解決方案 (即使\n"
"                              是很激進的方案)。\n"
"-u, --clean-deps              自動移除不需要的相依性。\n"
"-U, --no-clean-deps           不要自動移除不需要的相依性。\n"
"-D, --dry-run                 測試移除，不要真的移除。\n"
"    --details                 顯示詳細的安裝摘要。\n"

#: src/Zypper.cc:1433 src/Zypper.cc:1568
#, fuzzy
msgid ""
"source-install (si) [options] <name> ...\n"
"\n"
"Install specified source packages and their build dependencies.\n"
"\n"
"  Command options:\n"
"-d, --build-deps-only    Install only build dependencies of specified "
"packages.\n"
"-D, --no-build-deps      Don't install build dependencies.\n"
"-r, --repo <alias|#|URI> Install packages only from specified repositories.\n"
"    --download-only      Only download the packages, do not install.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"source-install (si) [選項] <名稱> ...\n"
"\n"
"安裝指定的來源套件及其建構相依項。\n"
"\n"
"  指令選項：\n"
"-d, --build-deps-only    只安裝指定套件的建構相依項。\n"
"-D, --no-build-deps      不要安裝建構相依項。\n"
"-r, --repo <別名|編號|URI> 僅從指定的儲存庫安裝套件。\n"
"    --download-only      僅下載但不安裝套件。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"source-install (si) [選項] <名稱> ...\n"
"\n"
"安裝指定的原始碼套件和建構的相依性套件。\n"
"\n"
"  指令選項：\n"
"-d, --build-deps-only       只安裝指定套件的建構相依性。\n"
"-D, --no-build-deps         不要安裝建構相依性。\n"
"-r, --repo <別名|編號|位址> 僅從指定的套件庫安裝套件。\n"
"    --download-only         僅下載套件，不安裝。\n"

#: src/Zypper.cc:1470 src/Zypper.cc:1613
#, fuzzy, c-format, boost-format
msgid ""
"verify (ve) [options]\n"
"\n"
"Check whether dependencies of installed packages are satisfied and suggest "
"to install or remove packages in order to repair the dependency problems.\n"
"\n"
"  Command options:\n"
"-r, --repo <alias|#|URI>    Load only the specified repository.\n"
"    --no-recommends         Do not install recommended packages, only "
"required.\n"
"    --recommends            Install also packages recommended by newly "
"installed\n"
"                            ones.\n"
"-D, --dry-run               Test the repair, do not actually do anything to\n"
"                            the system.\n"
"    --details               Show the detailed installation summary.\n"
"    --download              Set the download-install mode. Available modes:\n"
"                            %s\n"
"-d, --download-only         Only download the packages, do not install.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"verify (ve) [選項]\n"
"\n"
"檢查是否滿足已安裝套件的相依性，並提供安裝或移除相應套件的建議以修復相依性問"
"題。\n"
"\n"
"指令選項︰\n"
"-r、--repo <別名|編號|URI>    僅載入指定的儲存庫。\n"
"    --no-recommends         不安裝推薦的套件，只安裝需要的套件。\n"
"    --recommends            還安裝新安裝的套件\n"
"                            推薦的套件。\n"
"-D、--dry-run               測試修復，不對系統\n"
"                            執行任何實際動作。\n"
"    --details               顯示詳細安裝摘要。\n"
"    --download              設定下載安裝模式。可用模式為：\n"
"                            %s\n"
"-d、--download-only         只下載套件，不進行安裝。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"verify (ve) [選項]\n"
"\n"
"檢查已安裝的套件是否滿足相依性並建議安裝或移除套件來修正相依性問題。\n"
"\n"
"  指令選項：\n"
"-r, --repo <別名|編號|位址> 僅載入指定的套件庫。\n"
"    --no-recommends         不要安裝推薦的套件，僅安裝必需的。\n"
"    --recommends            除了必需的，也加裝\n"
"                            推薦的套件。\n"
"-D, --dry-run               測試修復，不要真的對系統\n"
"                            做任何事。\n"
"    --details               顯示詳細的安裝摘要。\n"
"    --download              設定下載-安裝模式。可用的模式：\n"
"                            %s\n"
"-d, --download-only         僅下載所需套件，不要安裝。\n"

#: src/Zypper.cc:1510 src/Zypper.cc:1655
#, fuzzy, c-format, boost-format
msgid ""
"install-new-recommends (inr) [options]\n"
"\n"
"Install newly added packages recommended by already installed packages. This "
"can typically be used to install new language packages or drivers for newly "
"added hardware.\n"
"\n"
"  Command options:\n"
"-r, --repo <alias|#|URI>    Load only the specified repositories.\n"
"-D, --dry-run               Test the installation, do not actually install.\n"
"    --details               Show the detailed installation summary.\n"
"    --download              Set the download-install mode. Available modes:\n"
"                            %s\n"
"-d, --download-only         Only download the packages, do not install.\n"
"    --debug-solver          Create solver test case for debugging.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"install-new-recommends (inr) [選項]\n"
"\n"
"安裝已安裝套件推薦的新增套件。為新增硬體安裝新語言套件或驅動程式時，通常可以"
"使用此指令。\n"
"\n"
" 指令選項︰\n"
"-r、--repo <別名|編號|URI> 僅載入指定的儲存庫。\n"
"-D、--dry-run            測試安裝，不真正進行安裝。\n"
"    --details               顯示詳細安裝摘要。\n"
"    --download              設定下載安裝模式。可用模式為︰\n"
"                            %s\n"
"-d、--download-only         只下載套件，不進行安裝。\n"
"    --debug-solver       建立解析程式測試個案以用於除錯。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"install-new-recommends (inr) [選項]\n"
"\n"
"安裝已安裝套件所建議的新增套件。為新增硬體安裝新語言套件或驅動程式時，通常可"
"以使用此指令。\n"
"\n"
"  指令選項：\n"
"-r, --repo <別名|編號|位址> 僅載入指定的套件庫。\n"
"-D, --dry-run               測試安裝，不要真的安裝任何東西。\n"
"    --details               顯示詳細的安裝摘要。\n"
"    --download              設定下載-安裝模式。可用的模式：\n"
"                            %s\n"
"-d, --download-only         僅下載套件，不要安裝。\n"
"    --debug-solver          建立解決方案測試案例以偵錯。\n"

#. translators: the %s = "ris" (the only service type currently supported)
#: src/Zypper.cc:1540 src/Zypper.cc:1685
#, fuzzy, c-format, boost-format
msgid ""
"addservice (as) [options] <URI> <alias>\n"
"\n"
"Add a repository index service to the system.\n"
"\n"
"  Command options:\n"
"-t, --type <type>       Type of the service (%s).\n"
"-d, --disable           Add the service as disabled.\n"
"-n, --name <name>       Specify descriptive name for the service.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"addservice (as) [選項] <URI> <別名>\n"
"\n"
"在系統中新增一個儲存庫索引服務。\n"
"\n"
"指令選項：\n"
"-t、--type <類型>       服務 (%s) 的類型。\n"
"-d、--disable           將服務新增為停用狀態。\n"
"-n、--name <別名>       為此服務指定描述性的名稱。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"addservice (as) [選項] <URI> <別名>\n"
"\n"
"加入一個套件庫索引服務到系統。\n"
"\n"
"  命令選項：\n"
"-t, --type <類型>       服務的類型 (%s)。\n"
"-d, --disable           加入為停用的服務。\n"
"-n, --name <別名>       為此服務指定描述性的名稱。\n"

#. TranslatorExplanation the %s = "yast2, rpm-md, plaindir"
#: src/Zypper.cc:1563 src/Zypper.cc:1708
#, fuzzy
msgid ""
"removeservice (rs) [options] <alias|#|URI>\n"
"\n"
"Remove specified repository index service from the system..\n"
"\n"
"  Command options:\n"
"    --loose-auth   Ignore user authentication data in the URI.\n"
"    --loose-query  Ignore query string in the URI.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"removeservice (rs) [選項] <別名|編號|URI>\n"
"\n"
"從系統中移除指定的儲存庫索引服務。\n"
"\n"
"  指令選項：\n"
"    --loose-auth   忽略 URI 中的使用者驗證資料。\n"
"    --loose-query  忽略 URI 中的查詢字串。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"removeservice (rs) [選項] <別名|編號|位址>\n"
"\n"
"從系統中移除指定的套件庫索引服務..\n"
"\n"
"  指令選項：\n"
"    --loose-auth   忽略位址中的使用者認證資料。\n"
"    --loose-query  忽略位址中的查詢字串。\n"

#. translators: %s is "--all" and "--all"
#: src/Zypper.cc:1599 src/Zypper.cc:1744
#, fuzzy, c-format, boost-format
msgid ""
"modifyservice (ms) <options> <alias|#|URI>\n"
"modifyservice (ms) <options> <%s>\n"
"\n"
"Modify properties of services specified by alias, number, or URI, or by the\n"
"'%s' aggregate options.\n"
"\n"
"  Command options:\n"
"-d, --disable                  Disable the service (but don't remove it).\n"
"-e, --enable                   Enable a disabled service.\n"
"-r, --refresh                  Enable auto-refresh of the service.\n"
"-R, --no-refresh               Disable auto-refresh of the service.\n"
"-n, --name <name>              Set a descriptive name for the service.\n"
"\n"
"-i, --ar-to-enable <alias>     Add a RIS service repository to enable.\n"
"-I, --ar-to-disable <alias>    Add a RIS service repository to disable.\n"
"-j, --rr-to-enable <alias>     Remove a RIS service repository to enable.\n"
"-J, --rr-to-disable <alias>    Remove a RIS service repository to disable.\n"
"-k, --cl-to-enable             Clear the list of RIS repositories to "
"enable.\n"
"-K, --cl-to-disable            Clear the list of RIS repositories to "
"disable.\n"
"\n"
"-a, --all                      Apply changes to all services.\n"
"-l, --local                    Apply changes to all local services.\n"
"-t, --remote                   Apply changes to all remote services.\n"
"-m, --medium-type <type>       Apply changes to services of specified type.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"modifyrepo (ms) <選項> <別名|編號|URI>\n"
"modifyrepo (ms) <選項> <%s>\n"
"\n"
"修改由別名、編號、URI 或 \n"
"「%s」結集選項指定的服務內容。\n"
"\n"
"  指令選項︰\n"
"-d, --disable             停用服務 (但不移除)。\n"
"-e, --enable              啟用已停用的服務。\n"
"-r, --refresh             啟用服務的自動重新整理功能。\n"
"-R, --no-refresh          停用服務的自動重新整理功能。\n"
"-n, --name                設定服務的描述性名稱。\n"
"\n"
"-i, --ar-to-enable <別名>     新增要啟用的 RIS 服務儲存庫。\n"
"-I, --ar-to-disable <別名>    新增要停用的 RIS 服務儲存庫。\n"
"-j, --rr-to-enable <別名>     移除要啟用的 RIS 服務儲存庫。\n"
"-J, --rr-to-disable <別名>    移除要停用的 RIS 服務儲存庫。\n"
"-k, --cl-to-enable             清除要啟用的 RIS 儲存庫清單。\n"
"-K, --cl-to-disable            清除要停用的 RIS 儲存庫清單。\n"
"\n"
"-a, --all                      將變更套用至所有服務。\n"
"-l, --local               將變更套用至所有本地服務。\n"
"-t, --remote              將變更套用至所有遠端服務。\n"
"-m, --medium-type <類型>  將變更套用至指定類型的服務。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"modifyservice (ms) <選項> <別名|編號|位址>\n"
"modifyservice (ms) <選項> <%s>\n"
"\n"
"修改藉由別名、編號、URI 或\n"
"'%s' 統合選項所指定的服務的屬性。\n"
"\n"
"  指令選項：\n"
"-d, --disable                 停用服務 (但不移除它)。\n"
"-e, --enable                  啟用一個已停用的服務。\n"
"-r, --refresh                 啟用服務的自動重新整理。\n"
"-R, --no-refresh              停用服務的自動重新整理。\n"
"-n, --name                    設定此服務的描述姓名稱。\n"
"\n"
"-i, --ar-to-enable <別名>     新增一個要啟用的 RIS 服務套件庫。\n"
"-I, --ar-to-disable <別名>    新增一個要停用的 RIS 服務套件庫。\n"
"-j, --rr-to-enable <別名>     移除一個要啟用的 RIS 服務套件庫。\n"
"-J, --rr-to-disable <別名>    移除一個要停用的 RIS 服務套件庫。\n"
"-k, --cl-to-enable            清除要啟用的 RIS 套件庫清單。\n"
"-K, --cl-to-disable           清除要停用的 RIS 套件庫清單。\n"
"\n"
"-a, --all                     套用變更到所有服務。\n"
"-l, --local                   套用變更到所有本地服務。\n"
"-t, --remote                  套用變更到所有遠端服務。\n"
"-m, --medium-type <類型>      套用變更到指定類型的服務。\n"

#: src/Zypper.cc:1647 src/Zypper.cc:1792
#, fuzzy
msgid ""
"services (ls) [options]\n"
"\n"
"List defined services.\n"
"\n"
"  Command options:\n"
"-u, --uri                 Show also base URI of repositories.\n"
"-p, --priority            Show also repository priority.\n"
"-d, --details             Show more information like URI, priority, type.\n"
"-r, --with-repos          Show also repositories belonging to the services.\n"
"-E, --show-enabled-only   Show enabled repos only.\n"
"-P, --sort-by-priority    Sort the list by repository priority.\n"
"-U, --sort-by-uri         Sort the list by URI.\n"
"-N, --sort-by-name        Sort the list by name.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"services (ls) [選項]\n"
"\n"
"列出定義的服務。\n"
"\n"
"  指令選項：\n"
"-u, --uri                 同時顯示儲存庫的基礎 URI。\n"
"-p, --priority            同時顯示儲存庫的優先程度。\n"
"-d, --details             顯示 URI、優先程度和類型等更多資訊。\n"
"-r, --with-repos          同時顯示服務屬下的儲存庫。\n"
"-E, --show-enabled-only   僅顯示啟用的儲存庫。\n"
"-P, --sort-by-priority    以儲存庫優先程度排序清單。\n"
"-U, --sort-by-uri         以 URI 排序清單。\n"
"-N, --sort-by-name        以名稱排序清單。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"services (ls) [選項]\n"
"\n"
"列出已定義的服務。\n"
"\n"
"  指令選項：\n"
"-u, --uri                 同時顯示套件庫的基礎位址。\n"
"-p, --priority            同時顯示套件庫的優先權。\n"
"-d, --details             顯示更多資訊，如位址、優先權、類型。\n"
"-r, --with-repos          同時顯示屬於服務的套件庫。\n"
"-E, --show-enabled-only   僅顯示啟用的套件庫。\n"
"-P, --sort-by-priority    依套件庫優先權排序清單。\n"
"-U, --sort-by-uri         依位址排序清單。\n"
"-N, --sort-by-name        依名稱排序清單。\n"

#: src/Zypper.cc:1675 src/Zypper.cc:1820
#, fuzzy
msgid ""
"refresh-services (refs) [options]\n"
"\n"
"Refresh defined repository index services.\n"
"\n"
"  Command options:\n"
"-f, --force           Force a complete refresh.\n"
"-r, --with-repos      Refresh also the service repositories.\n"
"-R, --restore-status  Also restore service repositories enabled/disabled "
"state.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"refresh-services (refs) [選項]\n"
"\n"
"重新整理定義的儲存庫索引服務。\n"
"\n"
"  指令選項︰\n"
"-f、--force           強制執行完整的重新整理。\n"
"-r、--with-repos      同時重新整理服務儲存庫。\n"
"-R、--restore-status  同時還原服務儲存庫的啟用/停用狀態。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"refresh-services (refs) [選項]\n"
"\n"
"重新整理定義的套件庫索引服務。\n"
"\n"
"  指令選項：\n"
"-f, --force           強制完整的重新整理。\n"
"-r, --with-repos      同時也重新整理套件庫。\n"
"-R, --restore-status  同時也回復服務套件庫的啟用/停用狀態。\n"

#. translators: the %s = "yast2, rpm-md, plaindir"
#: src/Zypper.cc:1708 src/Zypper.cc:1853
#, fuzzy, c-format, boost-format
msgid ""
"addrepo (ar) [options] <URI> <alias>\n"
"addrepo (ar) [options] <file.repo>\n"
"\n"
"Add a repository to the system. The repository can be specified by its URI "
"or can be read from specified .repo file (even remote).\n"
"\n"
"  Command options:\n"
"-r, --repo <file.repo>    Just another means to specify a .repo file to "
"read.\n"
"-t, --type <type>         Type of repository (%s).\n"
"-d, --disable             Add the repository as disabled.\n"
"-c, --check               Probe URI.\n"
"-C, --no-check            Don't probe URI, probe later during refresh.\n"
"-n, --name <name>         Specify descriptive name for the repository.\n"
"-p, --priority <integer>  Set priority of the repository.\n"
"-k, --keep-packages       Enable RPM files caching.\n"
"-K, --no-keep-packages    Disable RPM files caching.\n"
"-g, --gpgcheck            Enable GPG check for this repository.\n"
"-G, --no-gpgcheck         Disable GPG check for this repository.\n"
"-f, --refresh             Enable autorefresh of the repository.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"addrepo (ar) [選項] <URI> <別名>\n"
"addrepo (ar) [選項] <檔案.repo>\n"
"\n"
"將一個儲存庫新增至系統中。可以透過其 URI 來指定儲存庫，也可以從指定的 .repo "
"檔案 (甚至遠端位置的檔案) 讀取該儲存庫。\n"
"\n"
"  指令選項︰\n"
"-r、--repo <檔案.repo>    另一種指定要讀取的 .repo 檔案的方式。\n"
"-t、--type <類型>         儲存庫類型 (%s)。\n"
"-d、--disable             將儲存庫新增為停用模式。\n"
"-c、--check               探查 URI。\n"
"-C、--no-check            不探查 URI，稍後重新整理時探查。\n"
"-n、--name <名稱>         為儲存庫指定描述性名稱。\n"
"-p、--priority <整數>  設定儲存庫的優先程度。\n"
"-k、--keep-packages       啟用 RPM 檔案快取。\n"
"-K、--no-keep-packages    停用 RPM 檔案快取。\n"
"-g、--gpgcheck            對此儲存庫啟用 GPG 檢查。\n"
"-G、--no-gpgcheck         對此儲存庫停用 GPG 檢查。\n"
"-f、--refresh             對該儲存庫啟用自動重新整理功能。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"addrepo (ar) [選項] <位址> <別名>\n"
"addrepo (ar) [選項] <檔案.repo>\n"
"\n"
"增加一個套件庫到此系統。套件庫可藉由指定位址或從指定的 .repo 檔讀取(甚至是遠"
"端的)。\n"
"\n"
"  指令選項：\n"
"-r, --repo <檔案.repo>  這只是另一種指定讀取 .repo 檔的方法。\n"
"-t, --type <類型>       套件庫類型 (%s)。\n"
"-d, --disable           新增套件庫且將它設為停用。\n"
"-c, --check             偵測位址。\n"
"-C, --no-check          不要偵測位址，稍候重新整理時再偵測。\n"
"-n, --name <名稱>       指定此套件庫的描述名稱。\n"
"-p, --priority <整數>   指定此套件庫的優先權。\n"
"-k, --keep-packages     啟用 RPM 檔案快取。\n"
"-K, --no-keep-packages  停用 RPM 檔案快取。\n"
"-g, --gpgcheck          針對此套件庫啟用 GPG 檢查。\n"
"-G, --no-gpgcheck       針對此套件庫停用 GPG 檢查。\n"
"-f, --refresh           啟用套件庫的自動重新整理。\n"

#: src/Zypper.cc:1754 src/Zypper.cc:1899
#, fuzzy
msgid ""
"repos (lr) [options] [repo] ...\n"
"\n"
"List all defined repositories.\n"
"\n"
"  Command options:\n"
"-e, --export <FILE.repo>  Export all defined repositories as a single local ."
"repo file.\n"
"-a, --alias               Show also repository alias.\n"
"-n, --name                Show also repository name.\n"
"-u, --uri                 Show also base URI of repositories.\n"
"-p, --priority            Show also repository priority.\n"
"-r, --refresh             Show also the autorefresh flag.\n"
"-d, --details             Show more information like URI, priority, type.\n"
"-s, --service             Show also alias of parent service.\n"
"-E, --show-enabled-only   Show enabled repos only.\n"
"-U, --sort-by-uri         Sort the list by URI.\n"
"-P, --sort-by-priority    Sort the list by repository priority.\n"
"-A, --sort-by-alias       Sort the list by alias.\n"
"-N, --sort-by-name        Sort the list by name.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"repos (lr) [選項] [儲存庫] ...\n"
"\n"
"列出所有已定義的儲存庫。\n"
"\n"
"  指令選項：\n"
"-e, --export <FILE.repo>  將所有已定義的儲存庫輸出為單個本地 .repo 檔案。\n"
"-a, --alias               同時顯示儲存庫別名。\n"
"-n, --name                同時顯示儲存庫名稱。\n"
"-u, --uri                 同時顯示儲存庫的基礎 URI。\n"
"-p, --priority            同時顯示儲存庫的優先程度。\n"
"-r, --refresh             同時顯示自動重新整理旗標。\n"
"-d, --details             顯示 URI、優先程度和類型等更多資訊。\n"
"-s, --service             同時顯示父服務的別名。\n"
"-E, --show-enabled-only   僅顯示啟用的儲存庫。\n"
"-U, --sort-by-uri         以 URI 排序清單。\n"
"-P, --sort-by-priority    以儲存庫的優先程度排序清單。\n"
"-A, --sort-by-alias       以別名排序清單。\n"
"-N, --sort-by-name        以名稱排序清單。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"repos (lr) [選項] [套件庫] ...\n"
"\n"
"列出所有已定義的套件庫。\n"
"\n"
"  指令選項：\n"
"-e, --export <檔案.repo>  將所有已定義的套件庫匯出為單一的本機 .repo 檔。\n"
"-a, --alias               同時顯示套件庫別名。\n"
"-n, --name                同時顯示套件庫名稱。\n"
"-u, --uri                 同時顯示套件庫的基礎位址。\n"
"-p, --priority            同時顯示套件庫的優先權。\n"
"-r, --refresh             同時顯示自動重新整理旗標。\n"
"-d, --details             顯示更多資訊，如位址、優先權和類型。\n"
"-s, --service             同時顯示上一層服務的別名。\n"
"-E, --show-enabled-only   僅顯示啟用的套件庫。\n"
"-U, --sort-by-uri         依位址排列清單。\n"
"-P, --sort-by-priority    依套件優先權排列清單。\n"
"-A, --sort-by-alias       依別名排列清單。\n"
"-N, --sort-by-name        依名稱排列清單。\n"

#: src/Zypper.cc:1786 src/Zypper.cc:1931
#, fuzzy
msgid ""
"removerepo (rr) [options] <alias|#|URI>\n"
"\n"
"Remove repository specified by alias, number or URI.\n"
"\n"
"  Command options:\n"
"    --loose-auth   Ignore user authentication data in the URI.\n"
"    --loose-query  Ignore query string in the URI.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"removerepo (rr) [選項] <別名|編號|URI>\n"
"\n"
"使用別名、編號或 URI 移除指定的儲存庫。\n"
"\n"
"  指令選項：\n"
"    --loose-auth   忽略 URI 中的使用者驗證資料\n"
"    --loose-query  忽略 URI 中的查詢字串。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"removerepo (rr) [選項] <別名|編號|位址>\n"
"\n"
"移除透過別名、編號或位址指定的套件庫。\n"
"\n"
"  指令選項：\n"
"    --loose-auth   忽略位址中的使用者認證資料\n"
"    --loose-query  忽略位址中的查詢字串\n"

#: src/Zypper.cc:1805 src/Zypper.cc:1950
#, fuzzy
msgid ""
"renamerepo (nr) [options] <alias|#|URI> <new-alias>\n"
"\n"
"Assign new alias to the repository specified by alias, number or URI.\n"
"\n"
"This command has no additional options.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"renamerepo (nr) [選項] <別名|編號|URI> <新別名>\n"
"\n"
"根據別名、編號或 URI 將指定的儲存庫改名為新別名。\n"
"\n"
"本指令沒有其他選項。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"renamerepo (nr) [選項] <別名|編號|位址> <新別名>\n"
"\n"
"將由別名、編號或位址指定的套件庫改名為新別名。\n"
"\n"
"本指令沒有其他選項。\n"

#. translators: %s is "--all|--remote|--local|--medium-type"
#. and "--all, --remote, --local, --medium-type"
#: src/Zypper.cc:1838 src/Zypper.cc:1983
#, fuzzy, c-format, boost-format
msgid ""
"modifyrepo (mr) <options> <alias|#|URI> ...\n"
"modifyrepo (mr) <options> <%s>\n"
"\n"
"Modify properties of repositories specified by alias, number, or URI, or by "
"the\n"
"'%s' aggregate options.\n"
"\n"
"  Command options:\n"
"-d, --disable             Disable the repository (but don't remove it).\n"
"-e, --enable              Enable a disabled repository.\n"
"-r, --refresh             Enable auto-refresh of the repository.\n"
"-R, --no-refresh          Disable auto-refresh of the repository.\n"
"-n, --name <name>         Set a descriptive name for the repository.\n"
"-p, --priority <integer>  Set priority of the repository.\n"
"-k, --keep-packages       Enable RPM files caching.\n"
"-K, --no-keep-packages    Disable RPM files caching.\n"
"-g, --gpgcheck            Enable GPG check for this repository.\n"
"-G, --no-gpgcheck         Disable GPG check for this repository.\n"
"\n"
"-a, --all                 Apply changes to all repositories.\n"
"-l, --local               Apply changes to all local repositories.\n"
"-t, --remote              Apply changes to all remote repositories.\n"
"-m, --medium-type <type>  Apply changes to repositories of specified type.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"modifyrepo (mr) <選項> <別名|編號|URI> ...\n"
"modifyrepo (mr) <選項> <%s>\n"
"\n"
"修改指定別名、編號或 URI 的儲存庫內容，\n"
"或使用「%s」聚集選項修改儲存庫內容。\n"
"\n"
"指令選項︰\n"
"-d、--disable             停用儲存庫 (但不將其移除)。\n"
"-e、--enable              啟用一個已停用的儲存庫。\n"
"-r、--refresh             啟用儲存庫的自動重新整理功能。\n"
"-R、--no-refresh          停用儲存庫的自動重新整理功能。\n"
"-n、--name                為儲存庫設定一個描述性名稱。\n"
"-p、--priority <整數>     設定儲存庫的優先程度。\n"
"-k、--keep-packages       啟用 RPM 檔案快取。\n"
"-K、--no-keep-packages    停用 RPM 檔案快取。\n"
"-g、--gpgcheck            對此儲存庫啟用 GPG 檢查。\n"
"-G、--no-gpgcheck         對此儲存庫停用 GPG 檢查。\n"
"\n"
"-a、--all                 將變更套用至所有儲存庫。\n"
"-l、--local               將變更套用至所有本地儲存庫。\n"
"-t、--remote              將變更套用至所有遠端儲存庫。\n"
"-m、--medium-type <類型>  將變更套用至指定類型的儲存庫。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"modifyrepo (mr) <選項> <別名|編號|位址> ...\n"
"modifyrepo (mr) <選項> <%s>\n"
"\n"
"修改藉由別名、編號、URI，\n"
"或使用 '%s' 聚集選項所指定的套件庫的屬性。\n"
"\n"
"  指令選項:\n"
"-d, --disable             停用套件庫 (但未移除它)。\n"
"-e, --enable              啟用一個已停用的套件庫。\n"
"-r, --refresh             啟用套件庫的自動重新整理。\n"
"-R, --no-refresh          停用該套件庫的自動重新整理。\n"
"-n, --name                為此套件庫設定一個描述性的名稱。\n"
"-p, --priority <整數>     設定套件庫的優先性。\n"
"-k, --keep-packages       啟用 RPM 檔案快取。\n"
"-K, --no-keep-packages    停用 RPM 檔案快取。\n"
"-g, --gpgcheck            為此套件庫啟用 GPG 檢查。\n"
"-G, --no-gpgcheck         為此套件庫停用 GPG 檢查。\n"
"\n"
"-a, --all                 套用變更到所套件庫。\n"
"-l, --local               套用變更到所有本地套件庫。\n"
"-t, --remote              套用變更到所有遠端套件庫。\n"
"-m, --medium-type <類型>  套用變更到指定類型的套件庫。\n"

#: src/Zypper.cc:1880 src/Zypper.cc:2025
#, fuzzy
msgid ""
"refresh (ref) [alias|#|URI] ...\n"
"\n"
"Refresh repositories specified by their alias, number or URI. If none are "
"specified, all enabled repositories will be refreshed.\n"
"\n"
"  Command options:\n"
"-f, --force              Force a complete refresh.\n"
"-b, --force-build        Force rebuild of the database.\n"
"-d, --force-download     Force download of raw metadata.\n"
"-B, --build-only         Only build the database, don't download metadata.\n"
"-D, --download-only      Only download raw metadata, don't build the "
"database.\n"
"-r, --repo <alias|#|URI> Refresh only specified repositories.\n"
"-s, --services           Refresh also services before refreshing repos.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"refresh (ref) [別名|編號|URI] ...\n"
"\n"
"重新整理由別名、編號或 URI 指定的儲存庫。若未指定任何儲存庫，將會重新整理所有"
"啟用的儲存庫。\n"
"\n"
"  指令選項︰\n"
"-f、--force              強制執行完整的重新整理。\n"
"-b、--force-build        強制重建資料庫。\n"
"-d、--force-download     強制下載 RAW 中繼資料。\n"
"-B、--build-only         僅建立資料庫，不下載中繼資料。\n"
"-D、--download-only      僅下載 RAW 中繼資料，不建立資料庫。\n"
"-r、--repo <別名|編號|URI> 僅重新整理指定的儲存庫。\n"
"-s、--services           重新整理儲存庫之前也重新整理服務。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"refresh (ref) [別名|編號|位址]...\n"
"\n"
"重新整理由別名、編號或位址指定的套件庫。若未指定任何套件庫，將會重新整理所有"
"啟用的套件庫。\n"
"\n"
"  指令選項︰\n"
"-f、--force              強制執行完整的重新整理。\n"
"-b、--force-build        強制重建資料庫。\n"
"-d、--force-download     強制下載 RAW 中繼資料。\n"
"-B、--build-only         僅建立資料庫，不下載中繼資料。\n"
"-D、--download-only      僅下載 RAW 中繼資料，不建立資料庫。\n"
"-r、--repo <別名|編號|URI> 僅重新整理指定的套件庫。\n"
"-s、--services           重新整理套件庫之前也重新整理服務。\n"

#: src/Zypper.cc:1909 src/Zypper.cc:2054
#, fuzzy
msgid ""
"clean (cc) [alias|#|URI] ...\n"
"\n"
"Clean local caches.\n"
"\n"
"  Command options:\n"
"-r, --repo <alias|#|URI> Clean only specified repositories.\n"
"-m, --metadata           Clean metadata cache.\n"
"-M, --raw-metadata       Clean raw metadata cache.\n"
"-a, --all                Clean both metadata and package caches.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"clean (cc) [別名|編號|URI] ...\n"
"\n"
"清除本地快取。\n"
"\n"
"指令選項：\n"
"-r、--repo <別名|編號|URI> 只清除指定的儲存庫。\n"
"-m、--metadata           清除中繼資料快取。\n"
"-M、--raw-metadata       清除 raw 中繼資料快取。\n"
"-a、--all                清除中繼資料和套件快取。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"clean (cc) [別名|編號|位址] ...\n"
"\n"
"清除本機快取。\n"
"\n"
"  指令選項：\n"
"-r, --repo <別名|編號|位址> 只清除指定的套件庫。\n"
"-m, --metadata              清除中繼資料快取。\n"
"-M, --raw-metadata          清除原始中繼資料快取。\n"
"-a, --all                   清除中繼資料和套件快取。\n"

#. TranslatorExplanation the first %s = "package, patch, pattern, product"
#. and the second %s = "patch"
#: src/Zypper.cc:1938 src/Zypper.cc:2083
#, fuzzy, c-format, boost-format
msgid ""
"list-updates (lu) [options]\n"
"\n"
"List all available updates.\n"
"\n"
"  Command options:\n"
"-t, --type <type>             Type of package (%s).\n"
"                              Default: %s.\n"
"-r, --repo <alias|#|URI>      List only updates from the specified "
"repository.\n"
"    --best-effort             Do a 'best effort' approach to update. "
"Updates\n"
"                              to a lower than the latest version are\n"
"                              also acceptable.\n"
"-a, --all                     List all packages for which newer versions "
"are\n"
"                              available, regardless whether they are\n"
"                              installable or not.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"list-updates (lu) [選項]\n"
"\n"
"列出所有可用的更新。\n"
"\n"
"  指令選項：\n"
"-t, --type <類型>            套件 (%s) 的類型。\n"
"                        預設為：%s。\n"
"-r, --repo <別名|編號|URI>   僅列出指定儲存庫中的更新。\n"
"    --best-effort      「以最高效率」更新。更新\n"
"                             至低於最新版本的版本\n"
"                             也可接受。\n"
"-a, --all                  列出所有有較新版本可用的\n"
"                             套件，不論他們是否\n"
"                             可以安裝。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"list-updates (lu) [選項]\n"
"\n"
"列出所有可用的更新。\n"
"\n"
"  指令選項：\n"
"-t, --type <類型>            套件的類型 (%s)。\n"
"                             預設為：%s。\n"
"-r, --repo <別名|編號|位址>  僅列出指定套件庫中的更新。\n"
"    --best-effort            盡最大努力來趨近最新狀態，\n"
"                             更新到比最新版本還低些的也\n"
"                             可以接受。\n"
"-a, --all                    列出所有有較新版本可用的\n"
"                             套件，不論它們是否\n"
"                             可以安裝。\n"

#. translators: the first %s = "package, patch, pattern, product",
#. the second %s = "patch",
#. and the third %s = "only, in-avance, in-heaps, as-needed"
#: src/Zypper.cc:1995 src/Zypper.cc:2141
#, fuzzy, c-format, boost-format
msgid ""
"update (up) [options] [packagename] ...\n"
"\n"
"Update all or specified installed packages with newer versions, if "
"possible.\n"
"\n"
"  Command options:\n"
"\n"
"-t, --type <type>           Type of package (%s).\n"
"                            Default: %s.\n"
"-r, --repo <alias|#|URI>    Load only the specified repository.\n"
"    --skip-interactive      Skip interactive updates.\n"
"    --with-interactive      Do not skip interactive updates.\n"
"-l, --auto-agree-with-licenses\n"
"                            Automatically say 'yes' to third party license\n"
"                            confirmation prompt.\n"
"                            See man zypper for more details.\n"
"    --best-effort           Do a 'best effort' approach to update. Updates\n"
"                            to a lower than the latest version are\n"
"                            also acceptable.\n"
"    --debug-solver          Create solver test case for debugging.\n"
"    --no-recommends         Do not install recommended packages, only "
"required.\n"
"    --recommends            Install also recommended packages in addition\n"
"                            to the required.\n"
"    --replacefiles          Install the packages even if they replace files "
"from other,\n"
"                            already installed, packages. Default is to treat "
"file conflicts\n"
"                            as an error. --download-as-needed disables the "
"fileconflict check.\n"
"-R, --no-force-resolution   Do not force the solver to find solution,\n"
"                            let it ask.\n"
"    --force-resolution      Force the solver to find a solution (even\n"
"                            an aggressive one).\n"
"-D, --dry-run               Test the update, do not actually update.\n"
"    --details               Show the detailed installation summary.\n"
"    --download              Set the download-install mode. Available modes:\n"
"                            %s\n"
"-d, --download-only         Only download the packages, do not install.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"update (up) [選項][套件名稱] ...\n"
"\n"
"將所有或指定的已安裝套件更新至較新版本 (若適用)。\n"
"\n"
"指令選項︰\n"
"\n"
"-t、--type <類型>               套件 (%s) 的類型。\n"
"                                預設值︰%s。\n"
"-r、--repo <別名|編號|URI>        僅載入指定的儲存庫。\n"
"    --skip-interactive          跳過互動式更新。\n"
"-l、--auto-agree-with-licenses  對協力廠商授權\n"
"                               確認提示自動選取「是」。\n"
"                                請參閱 man zypper 以取得詳細資訊。\n"
"    --best-effort               以「最高效率」更新。更新\n"
"                                至低於最新版本的版本\n"
"                                也可接受。\n"
"    --debug-solver              建立解析程式測試個案以用於除錯。\n"
"    --no-recommends             不安裝推薦的套件，只安裝需要的套件。\n"
"    --recommends            除需要的套件外，還安裝\n"
"                            推薦的套件。\n"
"    --replacefiles          安裝套件，即使它們會取代其他\n"
"                            已安裝套件中的檔案。預設設定為將檔案衝突\n"
"                            視為錯誤。使用 --download-as-needed 可停用檔案衝"
"突檢查。\n"
"-R、-no-force-resolution       不強制解析程式尋找解決方案，\n"
"                            要先詢問。\n"
"    --force-resolution          強制解析程式尋找解決方案 (即使\n"
"                            該方案具有侵略性)。\n"
"-D、--dry-run                   測試更新，不真正更新。\n"
"    --details               顯示詳細安裝摘要。\n"
"    --download              設定下載安裝模式。可用模式為︰\n"
"                            %s\n"
"-d、--download-only         只下載套件，不進行安裝。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"update (up) [選項] [套件名稱] ...\n"
"\n"
"儘可能以較新版本更新所有或指定的已安裝套件。\n"
"\n"
"  指令選項：\n"
"\n"
"-t, --type <類型>            套件的類型 (%s)。\n"
"                             預設為：%s。\n"
"-r, --repo <別名|編號|位址>  僅載入指定的套件庫。\n"
"    --skip-interactive       跳過互動式更新。\n"
"    --with-interactive       不要跳過互動式更新。\n"
"-l, --auto-agree-with-licenses\n"
"                             對第三方授權確認提示自動\n"
"                             選取「是」。\n"
"                             請參閱 man zypper 以獲得更進一步的細節。\n"
"    --best-effort            盡最大努力來進行更新，更新\n"
"                             到比最新版本還低些的\n"
"                             也可以接受。\n"
"    --debug-solver           建立解決測試案例來偵錯。\n"
"    --no-recommends          不要安裝推薦套件，只安裝必需的。\n"
"    --recommends             除了必需的套件外，也安裝\n"
"                             推薦的套件。\n"
"    --replacefiles           安裝套件，即使它會取代來自其他已安裝套件的檔"
"案。\n"
"                             預設將檔案衝突視為錯誤來處理。\n"
"                             使用 --download-as-needed 選項來停用檔案衝突檢"
"查。\n"
"-R, --no-force-resolution    不要強迫找尋解決方案，\n"
"                             要先詢問。\n"
"    --force-resolution       強迫找尋一個解決方案 (即使\n"
"                             是很激進的方案)。\n"
"-D, --dry-run                測試更新，不要真的更新。\n"
"    --details                顯示詳細的安裝摘要。\n"
"    --download               設定下載-安裝模式。可用的模式：\n"
"                             %s\n"
"-d, --download-only          僅下載套件，不要安裝。\n"

#: src/Zypper.cc:2068 src/Zypper.cc:2218
#, fuzzy, c-format, boost-format
msgid ""
"patch [options]\n"
"\n"
"Install all available needed patches.\n"
"\n"
"  Command options:\n"
"\n"
"    --skip-interactive      Skip interactive patches.\n"
"    --with-interactive      Do not skip interactive patches.\n"
"-l, --auto-agree-with-licenses\n"
"                            Automatically say 'yes' to third party license\n"
"                            confirmation prompt.\n"
"                            See man zypper for more details.\n"
"-b, --bugzilla #            Install patch fixing the specified bugzilla "
"issue.\n"
"    --cve #                 Install patch fixing the specified CVE issue.\n"
"-g  --category <category>   Install only patches with this category.\n"
"    --severity <severity>   Install only patches with this severity.\n"
"    --date <YYYY-MM-DD>     Install only patches issued up to, but not "
"including, the specified date\n"
"    --debug-solver          Create solver test case for debugging.\n"
"    --no-recommends         Do not install recommended packages, only "
"required.\n"
"    --recommends            Install also recommended packages in addition\n"
"                            to the required.\n"
"    --replacefiles          Install the packages even if they replace files "
"from other,\n"
"                            already installed, packages. Default is to treat "
"file conflicts\n"
"                            as an error. --download-as-needed disables the "
"fileconflict check.\n"
"-r, --repo <alias|#|URI>    Load only the specified repository.\n"
"-D, --dry-run               Test the update, do not actually update.\n"
"    --details               Show the detailed installation summary.\n"
"    --download              Set the download-install mode. Available modes:\n"
"                            %s\n"
"-d, --download-only         Only download the packages, do not install.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"patch [選項]\n"
"\n"
"安裝所有可用的必要修補程式。\n"
"\n"
"  指令選項：\n"
"\n"
"    --skip-interactive      跳過互動式修補程式。\n"
"    --with-interactive      不要跳過互動式修補程式。\n"
"-l、--auto-agree-with-licenses\n"
"                            對協力廠商授權確認提示自動\n"
"                            選取「是」。\n"
"                            參閱 man zypper 可獲得更多資訊。\n"
"-b、--bugzilla #            安裝用於修復指定 bugzilla 問題的修補程式。\n"
"    --cve #                 安裝用於修復指定 CVE 問題的修補程式。\n"
"-g  --category <類別>   安裝所有此類別的修補程式。\n"
"    --severity <嚴重性>   安裝此嚴重性的所有修補程式。\n"
"    --date <YYYY-MM-DD>     安裝到指定日期前的所有修補程式 (不包括該日期)。\n"
"    --debug-solver          建立解決測試方案來偵錯。\n"
"    --no-recommends         不要安裝推薦的套件，僅安裝必需的。\n"
"    --recommends            除了必需的套件外，也安裝\n"
"                            推薦的套件。\n"
"    --replacefiles          安裝套件，即使它們會取代來自其他已安裝套件的檔"
"案。\n"
"                            預設會將檔案衝突視為錯誤來處理。\n"
"                            使用 --download-as-needed 選項可停用檔案衝突檢"
"查。\n"
"-r、--repo <別名|編號|URI> 僅載入指定的儲存庫。\n"
"-D、--dry-run               測試更新，而不要真正更新。\n"
"    --details               顯示詳細的安裝摘要。\n"
"    --download              設定下載與安裝模式。可用的模式：\n"
"                            %s\n"
"-d、--download-only         僅下載套件，不要安裝。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"patch [選項]\n"
"\n"
"安裝所有可用且需要的修補程式。\n"
"\n"
"  指令選項：\n"
"\n"
"    --skip-interactive      跳過互動式修補程式。\n"
"    --with-interactive      不要跳過互動式修補程式。\n"
"-l, --auto-agree-with-licenses\n"
"                            對第三方授權確認提示自動\n"
"                            選取「是」。\n"
"                            參閱 man zypper 獲得更多資訊。\n"
"-b, --bugzilla #            安裝用於修復指定 bugzilla 問題的修補程式。\n"
"    --cve #                 安裝用於修復指定 CVE 問題的修補程式。\n"
"-g  --category <類別>   安裝此類別的所有修補程式。\n"
"    --severity <嚴重度>   安裝此嚴重度的所有修補程式。\n"
"    --date <YYYY-MM-DD>     安裝到指定日期前的修補程式 (不包括該日期)。\n"
"    --debug-solver          建立解決測試方案來偵錯。\n"
"    --no-recommends         不要安裝推薦的套件，僅安裝必需的。\n"
"    --recommends            除了必需的套件外，也安裝\n"
"                            推薦的套件。\n"
"    --replacefiles          安裝套件，即使它會取代來自其他已安裝套件的檔"
"案。\n"
"                            預設將檔案衝突視為錯誤來處理。\n"
"                            使用 --download-as-needed 選項來停用檔案衝突檢"
"查。\n"
"-r, --repo <別名|編號|位址> 僅載入指定的套件庫。\n"
"-D, --dry-run               測試更新，而不要真正更新。\n"
"    --details               顯示詳細的安裝摘要。\n"
"    --download              設定下載-安裝模式。可用的模式：\n"
"                            %s\n"
"-d, --download-only         僅下載套件，不要安裝。\n"

#: src/Zypper.cc:2099 src/Zypper.cc:2249
#, fuzzy
msgid "Install only patches which affect the package management itself."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"僅安裝會影響套件管理本身的修補程式。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"只安裝會影響套件管理本身的修補程式。"

#: src/Zypper.cc:2121 src/Zypper.cc:2277
#, fuzzy
msgid ""
"list-patches (lp) [options]\n"
"\n"
"List all available needed patches.\n"
"\n"
"  Command options:\n"
"-b, --bugzilla[=#]         List needed patches for Bugzilla issues.\n"
"    --cve[=#]              List needed patches for CVE issues.\n"
"    --issues[=string]      Look for issues matching the specified string.\n"
"-a, --all                  List all patches, not only the needed ones.\n"
"-g  --category <category>  List only patches with this category.\n"
"    --severity <severity>  List only patches with this severity.\n"
"-r, --repo <alias|#|URI>   List only patches from the specified repository.\n"
"    --date <YYYY-MM-DD>    List only patches issued up to, but not "
"including, the specified date\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"list-patches (lp) [選項]\n"
"\n"
"列出所有可用的必要修補程式。\n"
"\n"
"  指令選項：\n"
"-b、--bugzilla[=編號]          列出解決 Bugzilla 問題所需的修補程式。\n"
"    --cve[=編號]               列出解決 CVE 問題所需的修補程式。\n"
"    --issues[=字串]       搜尋符合指定字串的問題。\n"
"-a、--all                   列出所有的修補程式，不限於所需要的。\n"
"-g  --category <類別>  僅列出此類別的修補程式。\n"
"    --severity <嚴重性>  僅列出此嚴重性的修補程式。\n"
"-r、--repo <別名|編號|URI> 僅列出指定儲存庫中的修補程式。\n"
"    --date <YYYY-MM-DD>    列出到指定日期為止的修補程式 (不包括該日期)。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"list-patches (lp) [選項]\n"
"\n"
"列出所有可用的必要修補程式。\n"
"\n"
"  指令選項：\n"
"-b、--bugzilla[=編號]          列出解決 Bugzilla 問題所需的修補程式。\n"
"    --cve[=編號]               列出解決 CVE 問題所需的修補程式。\n"
"    --issues[=字串]       搜尋符合指定字串的問題。\n"
"-a、--all                   列出所有的修補程式，不限於所需要的。\n"
"-g  --category <類別>  僅列出此類別的修補程式。\n"
"    --severity <嚴重度>  僅列出此嚴重度的修補程式。\n"
"-r、--repo <別名|編號|位址> 僅列出指定套件庫中的修補程式。\n"
"    --date <YYYY-MM-DD>    列出到指定日期為止的修補程式 (不包括該日期)。\n"

#: src/Zypper.cc:2176 src/Zypper.cc:2353
#, fuzzy, c-format, boost-format
msgid ""
"dist-upgrade (dup) [options]\n"
"\n"
"Perform a distribution upgrade.\n"
"\n"
"  Command options:\n"
"\n"
"    --from <alias|#|URI>    Restrict upgrade to specified repository.\n"
"-r, --repo <alias|#|URI>    Load only the specified repository.\n"
"-l, --auto-agree-with-licenses\n"
"                            Automatically say 'yes' to third party license\n"
"                            confirmation prompt.\n"
"                            See man zypper for more details.\n"
"    --debug-solver          Create solver test case for debugging\n"
"    --no-recommends         Do not install recommended packages, only "
"required.\n"
"    --recommends            Install also recommended packages in addition\n"
"                            to the required.\n"
"    --replacefiles          Install the packages even if they replace files "
"from other,\n"
"                            already installed, packages. Default is to treat "
"file conflicts\n"
"                            as an error. --download-as-needed disables the "
"fileconflict check.\n"
"-D, --dry-run               Test the upgrade, do not actually upgrade\n"
"    --details               Show the detailed installation summary.\n"
"    --download              Set the download-install mode. Available modes:\n"
"                            %s\n"
"-d, --download-only         Only download the packages, do not install.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"dist-upgrade (dup) [選項]\n"
"\n"
"執行套裝作業系統升級。\n"
"\n"
"指令選項︰\n"
"\n"
"    --from <別名|編號|URI>    升級範圍限制為指定的儲存庫。\n"
"-r、--repo <別名|編號|URI>    僅載入指定的儲存庫。\n"
"-l、--auto-agree-with-licenses\n"
"                            對協力廠商授權\n"
"                            確認提示自動選取「是」。\n"
"                            如需詳細資料，請參閱 man zypper。\n"
"    --debug-solver          建立解析程式測試個案以用於除錯\n"
"    --no-recommends         不安裝推薦的套件，只安裝需要的套件。\n"
"    --recommends            除需要的套件外，還安裝\n"
"                            推薦的套件。\n"
"    --replacefiles          安裝套件，即使它們會取代其他\n"
"                            已安裝套件中的檔案。預設設定為將檔案衝突\n"
"                            視為錯誤。使用 --download-as-needed 可停用檔案衝"
"突檢查。\n"
"    --details               顯示詳細安裝摘要。\n"
"-D、--dry-run               測試升級，不真正升級\n"
"    --download              設定下載安裝模式。可用模式為：\n"
"                            %s\n"
"-d、--download-only          只下載套件，不進行安裝。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"dist-upgrade (dup) [選項]\n"
"\n"
"進行發行版本升級。\n"
"\n"
"  指令選項：\n"
"\n"
"    --from <別名|編號|位址>    限制升級到指定的套件庫。\n"
"-r, --repo <別名|編號|位址>    僅載入指定的套件庫。\n"
"-l, --auto-agree-with-licenses\n"
"                               對第三方授權確認提示\n"
"                               自動選取「是」。\n"
"                               請參閱 man zypper 以獲得更進一步的細節。\n"
"    --debug-solver             建立解決測試案例來偵錯。\n"
"    --no-recommends            不要安裝推薦套件，僅安裝必需的。\n"
"    --recommends               除了必需的套件，也安裝\n"
"                               推薦的套件。\n"
"    --replacefiles             安裝套件，即使它會取代來自其他已安裝套件的檔"
"案。\n"
"                               預設將檔案衝突視為錯誤來處理。\n"
"                               使用 --download-as-needed 選項來停用檔案衝突檢"
"查。\n"
"-D, --dry-run                  測試升級，不要真的升級\n"
"    --details                  顯示詳細的安裝摘要。\n"
"    --download                 設定下載-安裝模式。可用的模式：\n"
"                               %s\n"
"-d, --download-only            僅下載套件，不要安裝。\n"

#: src/Zypper.cc:2202 src/Zypper.cc:2379
#, fuzzy
msgid "Whether to allow downgrading installed resolvables."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"是否允許降級已安裝的可解析項目。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"是否允許降級已安裝的解決方案。"

#: src/Zypper.cc:2203 src/Zypper.cc:2380
#, fuzzy
msgid "Whether to allow changing the names of installed resolvables."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"是否允許變更已安裝可解析項目的名稱。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"是否允許改變已安裝的解決方案名稱。"

#: src/Zypper.cc:2204 src/Zypper.cc:2381
#, fuzzy
msgid "Whether to allow changing the architecture of installed resolvables."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"是否允許變更已安裝可解析項目的架構。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"是否允許改變已安裝的解決方案架構。"

#: src/Zypper.cc:2205 src/Zypper.cc:2382
#, fuzzy
msgid "Whether to allow changing the vendor of installed resolvables."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"是否允許變更已安裝可解析項目的廠商。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"是否允許改變已安裝的解決方案廠商。"

#: src/Zypper.cc:2243 src/Zypper.cc:2420
#, fuzzy
msgid ""
"search (se) [options] [querystring] ...\n"
"\n"
"Search for packages matching any of the given search strings.\n"
"\n"
"  Command options:\n"
"    --match-substrings     Search for a match to partial words (default).\n"
"    --match-words          Search for a match to whole words only.\n"
"-x, --match-exact          Searches for an exact match of the search "
"strings.\n"
"    --provides             Search for packages which provide the search "
"strings.\n"
"    --recommends           Search for packages which recommend the search "
"strings.\n"
"    --requires             Search for packages which require the search "
"strings.\n"
"    --suggests             Search for packages which suggest the search "
"strings.\n"
"    --conflicts            Search packages conflicting with search strings.\n"
"    --obsoletes            Search for packages which obsolete the search "
"strings.\n"
"-n, --name                 Useful together with dependency options, "
"otherwise\n"
"                           searching in package name is default.\n"
"-f, --file-list            Search for a match in the file list of packages.\n"
"-d, --search-descriptions  Search also in package summaries and "
"descriptions.\n"
"-C, --case-sensitive       Perform case-sensitive search.\n"
"-i, --installed-only       Show only packages that are already installed.\n"
"-u, --uninstalled-only     Show only packages that are not currently "
"installed.\n"
"-t, --type <type>          Search only for packages of the specified type.\n"
"-r, --repo <alias|#|URI>   Search only in the specified repository.\n"
"    --sort-by-name         Sort packages by name (default).\n"
"    --sort-by-repo         Sort packages by repository.\n"
"-s, --details              Show each available version in each repository\n"
"                           on a separate line.\n"
"-v, --verbose              Like --details, with additional information where "
"the\n"
"                           search has matched (useful for search in "
"dependencies).\n"
"\n"
"* and ? wildcards can also be used within search strings.\n"
"If a search string is enclosed in '/', it's interpreted as a regular "
"expression.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"search (se) [選項] [查詢字串] ...\n"
"\n"
"搜尋與任何給定搜尋字串相符的套件。\n"
"\n"
"  指令選項：\n"
"    --match-substrings     搜尋與部分搜尋詞相符的項目 (預設值)。\n"
"    --match-words          只搜尋全字拼寫相符的項目。\n"
"-x、--match-exact          搜尋與搜尋字串完全相符的項目。\n"
"    --provides             搜尋提供搜尋字串的套件。\n"
"    --recommends           搜尋推薦搜尋字串的套件。\n"
"    --requires             搜尋需要搜尋字串的套件。\n"
"    --suggests             搜尋建議搜尋字串的套件。\n"
"    --conflicts            搜尋與搜尋字串衝突的套件。\n"
"    --obsoletes            搜尋不再使用搜尋字串的套件。\n"
"-n、--name                 與相依性選項配合使用，否則\n"
"                           預設會在套件名稱中搜尋。\n"
"-f、--file-list            在套件檔案清單中搜尋相符項。\n"
"-d、--search-descriptions  同時在套件摘要和描述中搜尋。\n"
"-C、--case-sensitive       搜尋區分大小寫。\n"
"-i、--installed-only       只顯示已安裝的套件。\n"
"-u、--uninstalled-only     只顯示目前未安裝的套件。\n"
"-t、--type <類型>          只搜尋指定類型的套件。\n"
"-r、--repo <別名|編號|URI>   只在指定儲存庫中搜尋。\n"
"    --sort-by-name         依名稱對套件排序 (預設值)。\n"
"    --sort-by-repo         依儲存庫對套件排序。\n"
"-s、--details              每個儲存庫中每個可用的版本\n"
"                           單獨顯示在一行。\n"
"-v、--verbose              與 --details 相似，不過會額外顯示相符項的\n"
"                           位置資訊 (用於在相依項中搜尋)。\n"
"\n"
"還可以在搜尋字串中使用 * 與 ? 萬用字元。\n"
"如果以「/」將搜尋字串括住，系統會將其解譯為規則運算式。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"search (se) [選項] [搜尋字串]...\n"
"\n"
"搜尋符合指定搜尋字串的套件\n"
" \n"
"  指令選項：\n"
"    --match-substrings      搜尋字串符合結果可以是詞語的一部分 (預設值)。\n"
"    --match-words           搜尋字串符合結果只能是完整的詞語。\n"
"-x, --match-exact           搜尋完全相符的套件名稱。\n"
"    --provides              搜尋提供搜尋字串的套件。\n"
"    --recommends            搜尋推薦搜尋字串的套件。\n"
"    --requires              搜尋需要搜尋字串的套件。\n"
"    --suggests              搜尋建議搜尋字串的套件。\n"
"    --conflicts             搜尋與搜尋字串衝突的套件。\n"
"    --obsoletes             搜尋哪個套件取代了搜尋字串。\n"
"-n, --name                  可和相依性選項合併使用，否則\n"
"                            預設搜尋套件名稱。\n"
"-f, --file-list             在檔案清單中搜尋符合的套件。\n"
"-d, --search-descriptions   也搜尋套件摘要和描述。\n"
"-C, --case-sensitive        執行區分大小寫的搜尋。\n"
"-i, --installed-only        僅顯示已經安裝的套件。\n"
"-u, --uninstalled-only      僅顯示目前尚未安裝的套件。\n"
"-t, --type <類型>           僅搜尋指定類型的套件。\n"
"-r, --repo <別名|編號|位址> 僅搜尋指定的套件庫。\n"
"    --sort-by-name          依名稱對套件排序 (預設值)。\n"
"    --sort-by-repo          依套件庫對套件排序。\n"
"-s, --details               每個套件庫中每個可用的版本\n"
"                            單獨顯示在一行。\n"
"-v, --verbose               與 --details 相似，不過會額外顯示相符項的\n"
"                            位置資訊 (對搜尋相依套件很有用)。\n"
"\n"
"* 和 ? 萬用字元也可以用在搜尋字串中。\n"
"如果搜尋字串被 '/' 包圍，它會被解讀為正規表示式。\n"

#: src/Zypper.cc:2316 src/Zypper.cc:2494
#, fuzzy
msgid ""
"patches (pch) [repository] ...\n"
"\n"
"List all patches available in specified repositories.\n"
"\n"
"  Command options:\n"
"\n"
"-r, --repo <alias|#|URI>  Just another means to specify repository.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"patches (pch) [儲存庫] ...\n"
"\n"
"列出指定儲存庫中所有可用的修補程式。\n"
"\n"
"  指令選項：\n"
"\n"
"-r、--repo <別名|編號|URI>   其他用於指定儲存庫的方法。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"patches (pch) [套件庫] ...\n"
"\n"
"列出指定套件庫中所有可用的修補程式\n"
"\n"
"  指令選項：\n"
"\n"
"-r, --repo <別名|編號|位址>  這是指定套件庫的另一種方法。\n"

#: src/Zypper.cc:2347 src/Zypper.cc:2525
#, fuzzy
msgid ""
"packages (pa) [options] [repository] ...\n"
"\n"
"List all packages available in specified repositories.\n"
"\n"
"  Command options:\n"
"\n"
"-r, --repo <alias|#|URI>  Just another means to specify repository.\n"
"-i, --installed-only      Show only installed packages.\n"
"-u, --uninstalled-only    Show only packages which are not installed.\n"
"    --orphaned            Show packages which are orphaned (without "
"repository).\n"
"    --suggested           Show packages which are suggested.\n"
"    --recommended         Show packages which are recommended.\n"
"    --unneeded            Show packages which are unneeded.\n"
"-N, --sort-by-name        Sort the list by package name.\n"
"-R, --sort-by-repo        Sort the list by repository.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"packages (pa) [選項] [儲存庫] ...\n"
"\n"
"列出指定儲存庫中所有可用的套件。\n"
"\n"
"  指令選項：\n"
"\n"
"-r、--repo <別名|編號|URI>  用於指定儲存庫的另一種方法。\n"
"-i、--installed-only      僅顯示已安裝套件。\n"
"-u、--uninstalled-only    僅顯示未安裝套件。\n"
"    --orphaned            顯示孤立套件 (沒有套件庫)。\n"
"    --suggested           顯示建議的套件。\n"
"    --recommended         顯示推薦的套件。\n"
"    --unneeded            顯示不需要的套件。\n"
"-N、--sort-by-name        根據套件名稱對清單排序。\n"
"-R、--sort-by-repo        根據儲存庫對清單排序。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"packages (pa) [選項] [套件庫] ...\n"
"\n"
"列出指定套件庫中所有可用的套件。\n"
"\n"
"  指令選項：\n"
"\n"
"-r, --repo <別名|編號|位址>  這是指定套件庫的另一種方法。\n"
"-i, --installed-only        僅顯示已安裝的套件。\n"
"-u, --uninstalled-only      僅顯示未安裝的套件。\n"
"-o, --orphaned              顯示孤兒套件 (沒有套件庫)。\n"
"-s, --suggested             顯示建議的套件。\n"
"-r, --recommended           顯示推薦的套件。\n"
"-n, --unneeded              顯示不需要的套件。\n"
"-N, --sort-by-name          以套件名稱排列清單。\n"
"-R, --sort-by-repo          以套件庫排列清單。\n"

#: src/Zypper.cc:2379 src/Zypper.cc:2557
#, fuzzy
msgid ""
"patterns (pt) [options] [repository] ...\n"
"\n"
"List all patterns available in specified repositories.\n"
"\n"
"  Command options:\n"
"\n"
"-r, --repo <alias|#|URI>  Just another means to specify repository.\n"
"-i, --installed-only      Show only installed patterns.\n"
"-u, --uninstalled-only    Show only patterns which are not installed.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"patterns (pt) [選項] [儲存庫] ...\n"
"\n"
"列出指定儲存庫中所有可用的樣式。\n"
"\n"
"  指令選項：\n"
"\n"
"-r、--repo <別名|編號|URI>  用於指定儲存庫的另一種方法。\n"
"-i、--installed-only      僅顯示已安裝樣式。\n"
"-u、--uninstalled-only    僅顯示未安裝樣式。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"patterns (pt) [選項] [套件庫] ...\n"
"\n"
"列出指定套件庫中所有可用的樣式。\n"
"\n"
"  指令選項：\n"
"\n"
"-r, --repo <別名|編號|位址>  這是指定套件庫的另一種方法。\n"
"-i, --installed-only        僅顯示已安裝的樣式。\n"
"-u, --uninstalled-only      僅顯示未安裝的樣式。\n"

#: src/Zypper.cc:2405 src/Zypper.cc:2583
#, fuzzy
msgid ""
"products (pd) [options] [repository] ...\n"
"\n"
"List all products available in specified repositories.\n"
"\n"
"  Command options:\n"
"\n"
"-r, --repo <alias|#|URI>  Just another means to specify repository.\n"
"-i, --installed-only      Show only installed products.\n"
"-u, --uninstalled-only    Show only products which are not installed.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"products (pd) [選項] [儲存庫] ...\n"
"\n"
"列出指定儲存庫中所有可用的產品。\n"
"\n"
"  指令選項：\n"
"\n"
"-r、--repo <別名|編號|URI>  用於指定儲存庫的另一種方法。\n"
"-i、--installed-only      僅顯示已安裝產品。\n"
"-u、--uninstalled-only    僅顯示未安裝產品。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"products (pd) [選項] [套件庫] ...\n"
"\n"
"列出指定套件庫中所有可用的產品。\n"
"\n"
"  指令選項：\n"
"\n"
"-r, --repo <別名|編號|位址>  這是指定套件庫的另一種方法。\n"
"-i, --installed-only        僅顯示已安裝的產品。\n"
"-u, --uninstalled-only      僅顯示未安裝的產品。\n"

#: src/Zypper.cc:2437 src/Zypper.cc:2615
#, fuzzy, c-format, boost-format
msgid ""
"info (if) [options] <name> ...\n"
"\n"
"Show detailed information for specified packages.\n"
"By default the packages which match exactly the given names are shown.\n"
"To get also packages partially matching use option '--match-substrings'\n"
"or use wildcards (*?) in name.\n"
"\n"
"  Command options:\n"
"-s, --match-substrings    Print information for packages partially matching "
"name.\n"
"-r, --repo <alias|#|URI>  Work only with the specified repository.\n"
"-t, --type <type>         Type of package (%s).\n"
"                          Default: %s.\n"
"    --provides            Show provides.\n"
"    --requires            Show requires and prerequires.\n"
"    --conflicts           Show conflicts.\n"
"    --obsoletes           Show obsoletes.\n"
"    --recommends          Show recommends.\n"
"    --suggests            Show suggests.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"info (if) [選項] <名稱> ...\n"
"\n"
"顯示指定套件的詳細資訊。\n"
"預設會顯示與指定名稱完全相符的套件。\n"
"若還想取得僅部分相符的套件，請使用選項「--match-substrings」，\n"
"或者在名稱中使用萬用字元 (*?)。\n"
"\n"
"  指令選項：\n"
"-s, --match-substrings    列印與名稱部分相符之套件的資訊。\n"
"-r, --repo <別名|編號|URI>  只對指定儲存庫起作用。\n"
"-t, --type <類型>         套件的類型 (%s)。\n"
"                          預設值：%s.\n"
"    --provides            顯示提供的套件。\n"
"    --requires            顯示必要的套件和必要條件。\n"
"    --conflicts           顯示衝突的套件。\n"
"    --obsoletes           顯示過時的套件。\n"
"    --recommends          顯示推薦的套件。\n"
"    --suggests            顯示建議的套件。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"info (if) [選項] <名稱> ...\n"
"\n"
"顯示指定套件的詳細資訊。\n"
"預設僅有完全符合指定名稱的才會顯示。\n"
"若也要顯示部份符合的套件，使用 '--match-substrings' 選項\n"
"或在名稱中使用萬用字元 (*?)。\n"
"\n"
"  指令選項：\n"
"-s, --match-substrings      印出部份名稱符合的套件資訊。\n"
"-r, --repo <別名|編號|位址>  只對指定套件庫起作用。\n"
"-t, --type <類型>           套件的類型 (%s)。\n"
"                            預設值：%s。\n"
"    --provides              顯示提供的套件。\n"
"    --requires              顯示必需和預先需要的套件。\n"
"    --conflicts             顯示衝突套件。\n"
"    --obsoletes            顯示汰換套件。\n"
"    --recommends           顯示推薦套件。\n"
"    --suggests              顯示建議套件。\n"

#: src/Zypper.cc:2470 src/Zypper.cc:2648
#, fuzzy, c-format, boost-format
msgid ""
"patch-info <patchname> ...\n"
"\n"
"Show detailed information for patches.\n"
"\n"
"This is an alias for '%s'.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"patch-info <修補程式名稱> ...\n"
"\n"
"顯示修補程式的詳細資訊。\n"
"\n"
"這是「%s」的別名。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"patch-info <修補程式名稱> ...\n"
"\n"
"顯示修補程式的詳細資料。\n"
"\n"
"這是 '%s' 的別名。\n"

#: src/Zypper.cc:2489 src/Zypper.cc:2667
#, fuzzy, c-format, boost-format
msgid ""
"pattern-info <pattern_name> ...\n"
"\n"
"Show detailed information for patterns.\n"
"\n"
"This is an alias for '%s'.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"pattern-info <模式名稱> ...\n"
"\n"
"顯示模式的詳細資訊。\n"
"\n"
"這是「%s」的別名。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"pattern-info <樣式名稱> ...\n"
"\n"
"顯示樣式的詳細資料。\n"
"\n"
"這是 '%s' 的別名。\n"

#: src/Zypper.cc:2508 src/Zypper.cc:2686
#, fuzzy, c-format, boost-format
msgid ""
"product-info <product_name> ...\n"
"\n"
"Show detailed information for products.\n"
"\n"
"This is an alias for '%s'.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"product-info <產品名稱> ...\n"
"\n"
"顯示產品的詳細資訊。\n"
"\n"
"這是「%s」的別名。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"product-info <產品名稱> ...\n"
"\n"
"顯示產品的詳細資料。\n"
"\n"
"這是 '%s' 的別名。\n"

#: src/Zypper.cc:2598 src/Zypper.cc:2776
#, fuzzy, c-format, boost-format
msgid ""
"addlock (al) [options] <packagename> ...\n"
"\n"
"Add a package lock. Specify packages to lock by exact name or by a glob "
"pattern using '*' and '?' wildcard characters.\n"
"\n"
"  Command options:\n"
"-r, --repo <alias|#|URI>  Restrict the lock to the specified repository.\n"
"-t, --type <type>         Type of package (%s).\n"
"                          Default: %s.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"addlock (al) [選項] <套件名稱> ...\n"
"\n"
"新增套件鎖定。 透過確切名稱或使用「*」與「?」萬用字元的全域樣式指定要鎖定的套"
"件。\n"
"\n"
"  指令選項：\n"
"-r, --repo <別名|編號|URI>  限制僅鎖定指定的儲存庫。\n"
"-t、--type <類型>         套件 (%s) 的類型。\n"
"                          預設 %s。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"addlock (al) [選項] <套件名稱> ...\n"
"\n"
"新增套件鎖定。 透過確切名稱或使用 '*' 和 '?' 萬用字元的全域樣式指定要鎖定的套"
"件。\n"
"\n"
"  指令選項：\n"
"-r, --repo <別名|編號|位址>  限制僅鎖定指定的套件庫。\n"
"-t、--type <類型>         套件 (%s) 的類型。\n"
"                          預設︰%s。\n"

#: src/Zypper.cc:2625 src/Zypper.cc:2803
#, fuzzy, c-format, boost-format
msgid ""
"removelock (rl) [options] <lock-number|packagename> ...\n"
"\n"
"Remove a package lock. Specify the lock to remove by its number obtained "
"with '%s' or by package name.\n"
"\n"
"  Command options:\n"
"-r, --repo <alias|#|URI>  Remove only locks with specified repository.\n"
"-t, --type <type>         Type of package (%s).\n"
"                          Default: %s.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"removelock (rl) [選項] <鎖定編號|套件名稱> ...\n"
"\n"
"移除一個套件鎖定。透過由「%s」獲得的編號或透過套件名稱指定要移除的鎖定。\n"
"\n"
"  指令選項：\n"
"-r, --repo <別名|編號|URI>  僅移除指定儲存庫的鎖定。\n"
"-t, --type <類型>         套件類型 (%s)。\n"
"                          預設︰%s。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"removelock (rl) [選項] <鎖定編號|套件名稱> ...\n"
"\n"
"移除一個套件鎖定。透過由 '%s 1' 獲得的編號或透過套件名稱指定要移除的鎖定。\n"
"\n"
"  指令選項：\n"
"-r, --repo <別名|編號|位址>  僅移除指定套件庫的鎖定。\n"
"-t, --type <類型>         套件類型 (%s)。\n"
"                          預設︰%s。\n"

#. translators: command synopsis; do not translate the command 'name (abbreviations)' or '-option' names
#: src/Zypper.cc:2652 src/Zypper.cc:2830
#, fuzzy
msgid "locks (ll) [options]"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"鎖定 (ll) [選項]\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"locks (ll) [選項]"

#. translators: -m, --matches
#: src/Zypper.cc:2659 src/Zypper.cc:2837
#, fuzzy
msgid "Show the number of resolvables matched by each lock."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"顯示符合每個鎖定的可解析項目的數量。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"顯示與每個鎖定相符的解決方案數量。"

#. translators: -s, --solvables
#: src/Zypper.cc:2661 src/Zypper.cc:2839
#, fuzzy
msgid "List the resolvables matched by each lock."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"列出符合每個鎖定的可解析項目。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"列出與每個鎖定相符的解決方案。"

#: src/Zypper.cc:2677 src/Zypper.cc:2855
#, fuzzy
msgid ""
"cleanlocks (cl)\n"
"\n"
"Remove useless locks.\n"
"\n"
"  Command options:\n"
"-d, --only-duplicates     Clean only duplicate locks.\n"
"-e, --only-empty          Clean only locks which doesn't lock anything.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"cleanlocks (cl)\n"
"\n"
"移除無用的鎖定。\n"
"\n"
"指令選項：\n"
"-d、--only-duplicates     僅清理重複鎖定。\n"
"-e、--only-empty          僅清理未鎖定任何項目的鎖定。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"cleanlocks (cl)\n"
"\n"
"移除無用的鎖定。\n"
"\n"
"  指令選項：\n"
"-d, --only-duplicates     僅移除重覆的鎖定。\n"
"-e, --only-empty          僅移除未鎖定任何東西的鎖定。\n"

#: src/Zypper.cc:2698 src/Zypper.cc:2876
#, fuzzy
msgid ""
"targetos (tos) [options]\n"
"\n"
"Show various information about the target operating system.\n"
"By default, an ID string is shown.\n"
"\n"
"  Command options:\n"
"-l, --label                 Show the operating system label.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"targetos (tos) [選項]\n"
"\n"
"顯示目標作業系統的各種相關資訊。\n"
"依預設會顯示 ID 字串。\n"
"\n"
"  指令選項︰\n"
"-l、--label                 顯示作業系統標籤。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"targetos (tos) [選項]\n"
"\n"
"顯示各種關於目標作業系統的資訊。\n"
"預設會顯示 ID 字串。\n"
"\n"
"  指令選項：\n"
"-l, --label                 顯示作業系統標籤。\n"

#: src/Zypper.cc:2719 src/Zypper.cc:2897
#, fuzzy
msgid ""
"versioncmp (vcmp) <version1> <version2>\n"
"\n"
"Compare the versions supplied as arguments.\n"
"\n"
"  Command options:\n"
"-m, --match  Takes missing release number as any release.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"versioncmp (vcmp) <版本1> <版本2>\n"
"\n"
"比較作為引數提供的版本。\n"
"\n"
" 指令選項︰\n"
"-m, --match  將遺失的版本號當作任何版本。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"versioncmp (vcmp) <版本1> <版本2>\n"
"\n"
"比較做為參數的版本。\n"
"\n"
"  指令選項：\n"
"-m, --match  將遺失版本號當成任何版本。\n"

#: src/Zypper.cc:2738 src/Zypper.cc:2916
#, fuzzy
msgid ""
"licenses\n"
"\n"
"Report licenses and EULAs of currently installed software packages.\n"
"\n"
"This command has no additional options.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"licenses\n"
"\n"
"報告目前已安裝軟體套件的授權和 EULA。\n"
"\n"
"此指令沒有其他選項。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"licenses\n"
"\n"
"報告目前已安裝軟體套件的授權合約和 EULA 。\n"
"\n"
"這個指令沒有其他的選項。\n"

#. translators: command description
#: src/Zypper.cc:2765 src/Zypper.cc:2943
#, fuzzy
msgid ""
"List running processes which might still use files and libraries deleted by "
"recent upgrades."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"列出可能仍在使用那些在近期升級中被刪除之檔案和庫的執行中程序。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"列出所用檔案及函式庫被最近升級刪除的執行中程序。"

#. translators: -s, --short
#: src/Zypper.cc:2769 src/Zypper.cc:2947
#, fuzzy
msgid ""
"Create a short table not showing the deleted files. Given twice, show only "
"processes which are associated with a system service. Given three times, "
"list the associated system service names only."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"建立一份簡表，不顯示已刪除的檔案。給定兩次，僅顯示與系統服務關聯的程序。給定"
"三次，僅列出關聯的系統服務名稱。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"產生一個不顯示刪除檔案的簡短列表。給定二次相同參數，則只顯示和系統服務相關的"
"程序。給定三次，則只列出相關的系統服務名稱。"

#. translators: --print <format>
#: src/Zypper.cc:2771 src/Zypper.cc:2949
#, fuzzy, c-format, boost-format
msgid ""
"For each associated system service print <format> on the standard output, "
"followed by a newline. Any '%s' directive in <format> is replaced by the "
"system service name."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"對於關聯的每個系統服務，在標準輸出上列印 <格式>，隨後換行。<格式> 下的任何"
"「%s」指令均會取代為系統服務名稱。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"對每個相關系統服務列印 <格式> 至標準輸出，並緊接著輸出一個換行字元。任何在 <"
"格式> 中的 '%s' 指令會被代換成系統服務名稱。"

#: src/Zypper.cc:2790 src/Zypper.cc:2968
#, fuzzy
msgid ""
"download [options] <packages>...\n"
"\n"
"Download rpms specified on the commandline to a local directory.\n"
"Per default packages are downloaded to the libzypp package cache\n"
"(/var/cache/zypp/packages; for non-root users $XDG_CACHE_HOME/zypp/"
"packages),\n"
"but this can be changed by using the global --pkg-cache-dir option.\n"
"\n"
"In XML output a <download-result> node is written for each\n"
"package zypper tried to download. Upon success the local path is\n"
"is found in 'download-result/localpath@path'.\n"
"\n"
"  Command options:\n"
"--all-matches        Download all versions matching the commandline\n"
"                     arguments. Otherwise only the best version of\n"
"                     each matching package is downloaded.\n"
"--dry-run            Don't download any package, just report what\n"
"                     would be done.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"download [選項] <套件>...\n"
"\n"
"下載指令行上指定的 RPM 到本地目錄。\n"
"套件預設會下載到 libzypp 套件快取目錄中\n"
"(/var/cache/zypp/packages；非 root 使用者的目錄為 $XDG_CACHE_HOME/zypp/"
"packages)，\n"
"不過，該預設值可透過全域設定 --pkg-cache-dir 修改。\n"
"\n"
"在 XML 輸出模式下，對每個 zypper 嘗試下載的套件，\n"
"將會輸出 <download-result> 節點。下載成功後，\n"
"本地端路徑可在「download-result/localpath@path」中找到。\n"
"\n"
"  指令行選項：\n"
"--all-matches        下載所有符合指令行引數的版本。\n"
"否則只有相符套件的最佳版本\n"
"                     會被下載。\n"
"--dry-run            不下載任何套件，\n"
"只報告將要執行的操作。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"download [選項] <套件>...\n"
"\n"
"下載指令行上指定的 RPM 到本地目錄。\n"
"套件預設會下載到 libzypp 套件快取目錄中\n"
"(/var/cache/zypp/packages；非 root 使用者的目錄為 $XDG_CACHE_HOME/zypp/"
"packages)，\n"
"不過，該預設值可透過全域設定 --pkg-cache-dir 修改。\n"
"\n"
"在 XML 輸出模式下，對每個 zypper 嘗試下載的套件，\n"
"將會寫入一個 <download-result> 節點。下載成功後，\n"
"本地端路徑可在「download-result/localpath@path」中找到。\n"
"\n"
"  指令選項：\n"
"--all-matches        下載所有符合指令行參數的版本。\n"
"                     否則只有相符套件的最佳版本\n"
"                     會被下載。\n"
"--dry-run            不下載任何套件，\n"
"                     只報告將要執行的操作。\n"

#: src/Zypper.cc:2829 src/Zypper.cc:3007
#, fuzzy
msgid ""
"source-download\n"
"\n"
"Download source rpms for all installed packages to a local directory.\n"
"\n"
"  Command options:\n"
"-d, --directory <dir>\n"
"                     Download all source rpms to this directory.\n"
"                     Default: /var/cache/zypper/source-download\n"
"--delete             Delete extraneous source rpms in the local directory.\n"
"--no-delete          Do not delete extraneous source rpms.\n"
"--status             Don't download any source rpms,\n"
"                     but show which source rpms are missing or extraneous.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"source-download\n"
"\n"
"將所有已安裝套件的來源 rpms 下載到本地目錄。\n"
"\n"
"  指令選項︰\n"
"-d, --directory <目錄>\n"
"                     將所有來源 rpms 下載到此目錄。\n"
"                     預設目錄為︰/var/cache/zypper/source-download\n"
"--delete             刪除本地目錄中多餘的來源 rpms。\n"
"--no-delete          不要刪除多餘的來源 rpms。\n"
"--status             不要下載任何來源 rpms，\n"
"                     只是顯示遺失或多餘的來源 rpms。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"source-download\n"
"\n"
"下載所有已安裝套件的原始碼 rpm 到本地目錄。\n"
"\n"
"  指令選項:\n"
"-d, --directory <目錄>\n"
"                     下載所有原始碼 rpm 到這個目錄。\n"
"                     預設為︰/var/cache/zypper/source-download\n"
"--delete             刪除在本地目錄下，不相關的原始碼 rpm。\n"
"--no-delete          不要刪除不相關的原始碼 rpm。\n"
"--status             不要下載任何原始碼 rpm，只顯示那些遺失或\n"
"                     不相關的 rpm。\n"

#: src/Zypper.cc:2856 src/Zypper.cc:3034
#, fuzzy
msgid ""
"quit (exit, ^D)\n"
"\n"
"Quit the current zypper shell.\n"
"\n"
"This command has no additional options.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"quit (exit, ^D)\n"
"\n"
"停止目前的 zypper 外圍程序。\n"
"\n"
"本指令沒有其他選項。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"quit (exit, ^D)\n"
"\n"
"退出目前的 zypper shell。\n"
"\n"
"本指令沒有其他選項。\n"

#: src/Zypper.cc:2873 src/Zypper.cc:3051
#, fuzzy
msgid ""
"shell (sh)\n"
"\n"
"Enter the zypper command shell.\n"
"\n"
"This command has no additional options.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"shell (sh)\n"
"\n"
"進入 zypper 指令外圍程序。\n"
"\n"
"本指令沒有其他選項。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"shell (sh)\n"
"\n"
"進入 zypper 指令 shell。\n"
"\n"
"本指令沒有選項。\n"

#. translators: this is just a legacy command
#: src/Zypper.cc:2907 src/Zypper.cc:3085
#, fuzzy
msgid ""
"list-resolvables (lr)\n"
"\n"
"List available resolvable types.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"list-resolvables (lr)\n"
"\n"
"列出可用的可解析項目類型。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"list-resolvables (lr)\n"
"\n"
"列出可用的解決方案類型。\n"

#. trunslators: this is a rug-compatibility command (equivalent of
#. 'zypper addrepo -t plaindir URI'). You can refer to rug's translations
#. for how to translate specific terms like channel or service if in doubt.
#: src/Zypper.cc:2929 src/Zypper.cc:3107
#, fuzzy
msgid ""
"mount\n"
"\n"
"Mount directory with RPMs as a channel.\n"
"\n"
"  Command options:\n"
"-a, --alias <alias>  Use given string as service alias.\n"
"-n, --name <name>    Use given string as service name.\n"
"-r, --recurse        Dive into subdirectories.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"mount\n"
"\n"
"使用作為通道的 RPM 掛接目錄。\n"
"\n"
"  指令選項：\n"
"-a、--alias <別名>  使用指定字串作為服務別名。\n"
"-n、--name <名稱>    使用指定字串作為服務名稱。\n"
"-r、--recurse        深入至子目錄。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"mount\n"
"\n"
"掛載有 RPM 的目錄做為一個頻道。\n"
"\n"
"  指令選項：\n"
"-a, --alias <別名>   使用給定的字串做為服務別名。\n"
"-n, --name <名稱>    使用給定的字串做為服務名稱。\n"
"-r, --recurse        延伸到子目錄。\n"

#: src/Zypper.cc:2958 src/Zypper.cc:3136
#, fuzzy, c-format, boost-format
msgid ""
"patch-search [options] [querystring...]\n"
"\n"
"Search for patches matching given search strings. This is an alias for "
"'%s'.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"patch-search [選項] [查詢字串...]\n"
"\n"
"搜尋符合指定搜尋字串的修補程式。 這是「%s」的 別名。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"patch-search [選項] [查詢字串...]\n"
"\n"
"搜尋符合給定搜尋字串的修補程式。這是 '%s' 的別名。\n"

#. translators: this is just a legacy command
#: src/Zypper.cc:2975 src/Zypper.cc:3153
#, fuzzy
msgid ""
"ping [options]\n"
"\n"
"This command has dummy implementation which always returns 0.\n"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"ping [選項]\n"
"\n"
"此指令會進行虛構實作，並一律傳回 0。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"ping [選項]\n"
"\n"
"此指令是一個假動作，它只會回應 0。\n"

#: src/Zypper.cc:3067 src/Zypper.cc:3244
#, fuzzy
msgid "Non-option program arguments: "
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"非選項程式引數：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"非選項程式引數︰ "

#: src/Zypper.cc:3129 src/Zypper.cc:109
#, fuzzy
msgid "Tell PackageKit to quit?"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"讓 PackageKit 離開？\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"要求 PackageKit 退出嗎？"

#: src/Zypper.cc:3140 src/Zypper.cc:119
#, fuzzy
msgid "Try again?"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"再試一次？\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"再次嘗試嗎？"

#: src/Zypper.cc:3221 src/Zypper.cc:3326
#, fuzzy
msgid "Root privileges are required for refreshing services."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"重新整理服務需要 root 權限。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"需要有 Root 權限才能重新整理服務。"

#: src/Zypper.cc:3248 src/Zypper.cc:3336 src/Zypper.cc:3567 src/Zypper.cc:3350
#: src/Zypper.cc:3439 src/Zypper.cc:3656
#, fuzzy
msgid "Root privileges are required for modifying system services."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"修改系統服務需要 root 權限。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"需要有 Root 權限才能修改系統服務。"

#: src/Zypper.cc:3317 src/Zypper.cc:3423
#, fuzzy, c-format, boost-format
msgid "'%s' is not a valid service type."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"%s 不是一個有效的伺服器類型。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"'%s' 不是有效的服務類型。"

#: src/Zypper.cc:3319 src/Zypper.cc:3425
#, fuzzy, c-format, boost-format
msgid "See '%s' or '%s' to get a list of known service types."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請參閱「%s」或「%s」獲取已知服務類型的清單。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"參閱 '%s' 或 '%s' 取得已知服務類型清單。"

#. translators: aggregate option is e.g. "--all". This message will be
#. followed by ms command help text which will explain it
#. translators: aggregate option is e.g. "--all". This message will be
#. followed by mr command help text which will explain it
#: src/Zypper.cc:3348 src/Zypper.cc:3718 src/Zypper.cc:3450 src/Zypper.cc:3797
#, fuzzy
msgid "Alias or an aggregate option is required."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"需要別名或結集選項。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"別名或聚集選項是必要的。"

#: src/Zypper.cc:3382 src/Zypper.cc:3482
#, fuzzy, c-format, boost-format
msgid "Service '%s' not found."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"找不到服務「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"服務 '%s' 找不到。"

#: src/Zypper.cc:3414 src/Zypper.cc:3566 src/Zypper.cc:3650 src/Zypper.cc:3705
#: src/Zypper.cc:3509 src/Zypper.cc:3655 src/Zypper.cc:3734 src/Zypper.cc:3786
#, fuzzy
msgid "Root privileges are required for modifying system repositories."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"需要有 Root 權限才能修改系統儲存庫。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"需要有 Root 權限才能修改系統套件庫。"

#: src/Zypper.cc:3493 src/Zypper.cc:3587
#, fuzzy
msgid ""
"If only one argument is used, it must be a URI pointing to a .repo file."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"若僅使用一個引數，則它必須為指向 .repo 檔案的 URI。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"如果只使用一個參數，它必須是一個指向 .repo 檔的位址。"

#: src/Zypper.cc:3544 src/Zypper.cc:3636
#, fuzzy
msgid "Specified type is not a valid repository type:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"指定的類型不是有效的儲存庫類型：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"指定的類型不是有效的套件庫類型："

#: src/Zypper.cc:3546 src/Zypper.cc:3637
#, fuzzy, c-format, boost-format
msgid "See '%s' or '%s' to get a list of known repository types."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請參閱「%s」或「%s」獲取已知儲存庫類型的清單。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"參閱 '%s' 或 '%s' 取得已知的套件庫類型清單。"

#: src/Zypper.cc:3574 src/Zypper.cc:4847 src/utils/messages.cc:48
#: src/Zypper.cc:3663 src/Zypper.cc:4846 src/utils/messages.cc:45
#, fuzzy
msgid "Required argument missing."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"缺少需要的引數。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"缺少需要的參數。"

#. translators: %s is the supplied command line argument which
#. for which no repository counterpart was found
#: src/Zypper.cc:3600 src/Zypper.cc:3688
#, fuzzy, c-format, boost-format
msgid "Repository '%s' not found by alias, number or URI."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"根據別名、編號或 URI 未找到儲存庫「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無法由它的別名、編號或位址找到套件庫 '%s'。"

#. translators: %s is the supplied command line argument which
#. for which no service counterpart was found
#: src/Zypper.cc:3623 src/Zypper.cc:3710
#, fuzzy, c-format, boost-format
msgid "Service '%s' not found by alias, number or URI."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"根據別名、編號或 URI 未找到服務「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無法由它的別名、編號或位址找到服務 '%s'。"

#: src/Zypper.cc:3657 src/Zypper.cc:3741
#, fuzzy
msgid "Too few arguments. At least URI and alias are required."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"參數過少。至少要有 URI 和別名。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"參數過少。至少要有位址和別名。"

#: src/Zypper.cc:3681 src/Zypper.cc:3765
#, fuzzy, c-format, boost-format
msgid "Repository '%s' not found."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"找不到儲存庫「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"找不到套件庫 '%s'。"

#: src/Zypper.cc:3751 src/Zypper.cc:3829
#, fuzzy, c-format, boost-format
msgid "Repository %s not found."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"找不到儲存庫 %s。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"找不到套件庫 %s。"

#: src/Zypper.cc:3771 src/Zypper.cc:3846
#, fuzzy
msgid "Root privileges are required for refreshing system repositories."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"需要有 Root 權限才能重新整理系統儲存庫。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"需要有 Root 權限才能重新整理系統套件庫。"

#: src/Zypper.cc:3778 src/Zypper.cc:3852
#, fuzzy, c-format, boost-format
msgid "The '%s' global option has no effect here."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"全域選項「%s」在此無效。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"全域選項 '%s' 在此無效。"

#: src/Zypper.cc:3787 src/Zypper.cc:3860
#, fuzzy, c-format, boost-format
msgid "Arguments are not allowed if '%s' is used."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"若使用「%s」，則不允許使用引數。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"如果使用了 '%s'，則不允許使用參數。"

#: src/Zypper.cc:3815 src/Zypper.cc:3884
#, fuzzy
msgid "Root privileges are required for cleaning local caches."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"需要有 Root 權限才能清理本地快取。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"需要有 Root 權限才能清除本機快取。"

#: src/Zypper.cc:3846 src/Zypper.cc:3912
#, fuzzy
msgid "Root privileges are required for installing or uninstalling packages."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"需要有 Root 權限才能安裝或解除安裝套件。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"需要有 Root 權限才能安裝或移除套件。"

#. translators: rug related message, shown if
#. 'zypper in --entire-catalog foorepo someargument' is specified
#: src/Zypper.cc:3858 src/Zypper.cc:3924
#, fuzzy
msgid "Ignoring arguments, marking the entire repository."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"忽略引數，核取整個儲存庫。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"將忽略參數，標示整個套件庫。"

#: src/Zypper.cc:3868 src/Zypper.cc:3935
#, fuzzy, c-format, boost-format
msgid "Unknown package type: %s"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未知的套件類型：%s\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"不明的套件類型：%s"

#: src/Zypper.cc:3879 src/Zypper.cc:3945
#, fuzzy
msgid "Cannot uninstall patches."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"無法解除安裝修補程式。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無法反安裝修補程式。"

#: src/Zypper.cc:3891 src/Zypper.cc:3956
#, fuzzy
msgid "Uninstallation of a source package not defined and implemented."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"對來源套件的解除安裝操作尚未定義和完成。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"反安裝一個原始碼套件仍未定義且未完成。"

#: src/Zypper.cc:3912 src/Zypper.cc:3975
#, fuzzy, c-format, boost-format
msgid "'%s' looks like an RPM file. Will try to download it."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"「%s」看起來像是一個 RPM 檔。將嘗試去下載它。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"'%s' 看起來像是一個 RPM 檔。將嘗試去下載它。"

#: src/Zypper.cc:3925 src/Zypper.cc:3984
#, fuzzy, c-format, boost-format
msgid "Problem with the RPM file specified as '%s', skipping."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"指定的 RPM 檔「%s」有問題，正在跳過。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"指定的 RPM 檔 '%s' 有問題，正在跳過。"

#: src/Zypper.cc:3950 src/Zypper.cc:4006
#, fuzzy, c-format, boost-format
msgid "Problem reading the RPM header of %s. Is it an RPM file?"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"讀取 %s 的 RPM 檔頭時出現問題。確認這是 RPM 檔嗎？\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"讀取 %s 的 RPM 檔頭出現問題。確認是一個 RPM 檔嗎？"

#: src/Zypper.cc:4006 src/Zypper.cc:4144 src/Zypper.cc:4062 src/Zypper.cc:4193
#, fuzzy
msgid ""
"No repositories defined. Operating only with the installed resolvables. "
"Nothing can be installed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"沒有定義儲存庫。操作只能局限於已安裝的可解析項。無法安裝任何項目。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"警告：沒有已定義的套件庫。您只能使用已安裝的解決方案操作。無法安裝任何項目。"

#. translators: meaning --force with --capability
#: src/Zypper.cc:4053 src/Zypper.cc:4107
#, fuzzy, c-format, boost-format
msgid "%s cannot currently be used with %s"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"%s 目前不能和 %s 一起使用\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"%s 目前不能和 %s 一起用"

#: src/Zypper.cc:4097 src/Zypper.cc:4148
#, fuzzy
msgid "Source package name is a required argument."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"來源套件的名稱為必要的引數。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"原始碼套件的名稱為必要的參數。"

#: src/Zypper.cc:4187 src/Zypper.cc:4231
#, fuzzy
msgid "Mode is set to 'match-exact'"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"模式已設為「完全符合」\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"模式已被設定為'完全符合'"

#: src/Zypper.cc:4209 src/Zypper.cc:4562 src/Zypper.cc:4669 src/Zypper.cc:4875
#: src/Zypper.cc:4928 src/Zypper.cc:4973 src/Zypper.cc:4251 src/Zypper.cc:4577
#: src/Zypper.cc:4677 src/Zypper.cc:4874 src/Zypper.cc:4922 src/Zypper.cc:4962
#, fuzzy, c-format, boost-format
msgid "Unknown package type '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未知的套件類型「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"不明的套件類型：'%s'。"

#: src/Zypper.cc:4232 src/Zypper.cc:4273
#, fuzzy, c-format, boost-format
msgid "Specified repository '%s' is disabled."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"指定儲存庫「%s」已停用。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"指定套件庫 '%s' 已停用。"

#: src/Zypper.cc:4363 src/search.cc:579 src/search.cc:505
#, fuzzy
msgid "No packages found."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"找不到任何套件。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"沒有發現套件。"

#: src/Zypper.cc:4399 src/Zypper.cc:4438
#, fuzzy
msgid "Problem occurred initializing or executing the search query"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"啟始化或執行搜尋查詢時出現問題\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"初始化或執行搜尋查詢時出現問題"

#: src/Zypper.cc:4582 src/Zypper.cc:4634 src/Zypper.cc:4596 src/Zypper.cc:4644
#, fuzzy, c-format, boost-format
msgid "Cannot use %s together with %s."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"無法將 %s 與 %s 一起使用。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無法一起使用 %s 和 %s。"

#: src/Zypper.cc:4676 src/Zypper.cc:4684 src/Zypper.cc:4759 src/Zypper.cc:4692
#: src/Zypper.cc:4765
#, fuzzy
msgid "Operation not supported."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"不支援的操作。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"不支援此操作。"

#: src/Zypper.cc:4677 src/Zypper.cc:4685
#, fuzzy, c-format, boost-format
msgid "To update installed products use '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"若要更新安裝的產品，請使用「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"要更新已安裝的產品請用 '%s'。"

#: src/Zypper.cc:4686 src/Zypper.cc:4693
#, fuzzy, c-format, boost-format
msgid ""
"Zypper does not keep track of installed source packages. To install the "
"latest source package and its build dependencies, use '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"Zypper 不會追蹤安裝的來源套件。若要安裝最新的來源套件及其建構相依項，請使用"
"「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"Zypper 不會追蹤安裝的原始碼套件。若要安裝最新的原始碼套件及其建構相依項，請使"
"用 '%s 1'。"

#: src/Zypper.cc:4704 src/Zypper.cc:4709
#, fuzzy
msgid ""
"Cannot use multiple types when specific packages are given as arguments."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"如果指定特定套件做為引數，則無法使用多種類型。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"當指定套件作為參數時無法使用多重格式。"

#: src/Zypper.cc:4820 src/Zypper.cc:4821
#, fuzzy, c-format, boost-format
msgid ""
"You are about to do a distribution upgrade with all enabled repositories. "
"Make sure these repositories are compatible before you continue. See '%s' "
"for more information about this command."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"即將使用所有啟用的儲存庫執行套裝作業系統升級。必須確定這些儲存庫相容，才能繼"
"續。如需此指令的詳細資訊，請參閱「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"您將要使用所有可用的套件庫進行發行版本升級。 在您繼續之前，請先確定這些套件庫"
"的相容性。參閱 '%s' 得到更多關於此命令的資訊。"

#: src/Zypper.cc:4905 src/Zypper.cc:4951 src/Zypper.cc:4901 src/Zypper.cc:4942
#, fuzzy
msgid "Root privileges are required for adding of package locks."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"新增套件鎖定需要 root 權限。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"加入套件鎖定需要 root 權限。"

#: src/Zypper.cc:5066 src/Zypper.cc:5047
#, fuzzy, c-format, boost-format
msgid "Distribution Label: %s"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"配送標籤︰%s\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"發行版本標籤：%s"

#: src/Zypper.cc:5068 src/Zypper.cc:5048
#, fuzzy, c-format, boost-format
msgid "Short Label: %s"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"簡短標籤︰%s\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"簡短標籤：%s"

#: src/Zypper.cc:5116 src/Zypper.cc:5091
#, fuzzy, c-format, boost-format
msgid "%s is newer than %s"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"%s 比 %s 新\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"%s 比 %s 還新"

#: src/Zypper.cc:5118 src/Zypper.cc:5093
#, fuzzy, c-format, boost-format
msgid "%s is older than %s"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"%s 比 %s 舊\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"%s 比 %s 還舊"

#: src/Zypper.cc:5202 src/source-download.cc:217 src/Zypper.cc:5171
#, fuzzy, c-format, boost-format
msgid "Insufficient privileges to use download directory '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"權限不足，無法使用下載目錄「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"權限不足以使用下載目錄 '%s'。"

#: src/Zypper.cc:5260 src/Zypper.cc:5223
#, fuzzy
msgid "This command only makes sense in the zypper shell."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"這個指令只在 zypper 外圍程序中才有意義。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"這個指令只在 zypper shell 中有意義。"

#: src/Zypper.cc:5272 src/Zypper.cc:5233
#, fuzzy
msgid "You already are running zypper's shell."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"您已正在執行 zypper 外圍程序。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"您已經在執行 zypper shell。"

#: src/Zypper.cc:5358 src/Zypper.cc:5310
#, fuzzy
msgid "Resolvable Type"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"可解析類型\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"解決方案類型"

#. TranslatorExplanation %d is the solution number
#: src/solve-commit.cc:60 src/solve-commit.cc:52
#, fuzzy, c-format, boost-format
msgid " Solution %d: "
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"解決方案 %d：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
" 解決方案 %d︰ "

#. translators: meaning --force-resolution and --no-force-resolution
#: src/solve-commit.cc:234 src/solve-commit.cc:220
#, fuzzy, c-format, boost-format
msgid "%s conflicts with %s, will use the less aggressive %s"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"%s 與 %s 衝突，將使用不太具侵略性的 %s\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"%s 和 %s 衝突，將使用較小傷害的 %s"

#: src/solve-commit.cc:263 src/solve-commit.cc:248
#, fuzzy
msgid "Force resolution:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"強制解決方法：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"強迫解決方法："

#: src/solve-commit.cc:410 src/solve-commit.cc:392
#, fuzzy
msgid "Generating solver test case..."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在產生解析程式測試個案...\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在產生解決測試方案..."

#: src/solve-commit.cc:413 src/solve-commit.cc:394
#, fuzzy, c-format, boost-format
msgid "Solver test case generated successfully at %s."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"於 %s 成功產生解析程式測試個案。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"產生解決測試方案成功於 %s。"

#: src/solve-commit.cc:417 src/solve-commit.cc:397
#, fuzzy
msgid "Error creating the solver test case."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"建立解析程式測試個案時發生錯誤。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"建立解決測試方案時發生錯誤。"

#: src/solve-commit.cc:451 src/solve-commit.cc:431
#, fuzzy, c-format, boost-format
msgid ""
"Check for running processes using deleted libraries is disabled in zypper."
"conf. Run '%s' to check manually."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"對於是否有執行中的程序還在使用所刪除的程式庫，zypper.conf 中已停用相應的檢"
"查。請執行「%s」手動檢查。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"檢查使用已刪除函式庫之執行中程序的功能在 zypper.conf 中已被關閉。請手動執行 "
"'%s' 來做檢查。"

#. Here: Table output
#: src/solve-commit.cc:457 src/ps.cc:104 src/solve-commit.cc:436
#, fuzzy
msgid "Checking for running processes using deleted libraries..."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在檢查使用已刪除程式庫的執行中程序...\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在檢查使用已刪除函式庫的執行中程序..."

#: src/solve-commit.cc:473 src/solve-commit.cc:457
#, fuzzy, c-format, boost-format
msgid ""
"There are some running programs that might use files deleted by recent "
"upgrade. You may wish to check and restart some of them. Run '%s' to list "
"these programs."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"某些執行中的程式可能使用了最近升級所刪除的檔案。您可能需要檢查並重新啟動部分"
"程式。執行「%s」可列出這些程式。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"有些正在執行的程式使用了已被最近更新刪除的檔案。 您可能會想要檢查並重新啟動這"
"些程式。請執行 '%s' 來列出這些程式。"

#: src/solve-commit.cc:484 src/solve-commit.cc:468
#, fuzzy
msgid "Update notifications were received from the following packages:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"收到來自以下套件的更新通知：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"從下列套件收到了更新提醒："

#: src/solve-commit.cc:496 src/solve-commit.cc:477
#, fuzzy, c-format, boost-format
msgid "Message from package %s:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"來自套件 %s 的訊息︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"從套件 %s 收到的訊息："

#: src/solve-commit.cc:505 src/solve-commit.cc:486
#, fuzzy
msgid "View the notifications now?"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"現在要檢視通知嗎？\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"現在檢視提醒嗎？"

#: src/solve-commit.cc:550 src/solve-commit.cc:532
#, fuzzy
msgid "Computing distribution upgrade..."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在計算套裝作業系統升級...\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在計算版本升級..."

#: src/solve-commit.cc:555 src/solve-commit.cc:537
#, fuzzy
msgid "Resolving package dependencies..."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在解析套件相依性...\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在解決套件相依性..."

#: src/solve-commit.cc:640 src/solve-commit.cc:621
#, fuzzy
msgid "Root privileges are required to fix broken package dependencies."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"需要有 Root 權限才能修復套件的相依性。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"需要有 Root 權限才能修正套件的相依性。"

#. translators: help text for 'y' option in the 'Continue?' prompt
#: src/solve-commit.cc:671 src/solve-commit.cc:648
#, fuzzy
msgid ""
"Yes, accept the summary and proceed with installation/removal of packages."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"是，接受摘要並繼續安裝/移除套件。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"是的，接受此摘要並進行套件的安裝/移除。"

#. translators: help text for 'n' option in the 'Continue?' prompt
#: src/solve-commit.cc:673 src/solve-commit.cc:650
#, fuzzy
msgid "No, cancel the operation."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"否，取消此操作。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"不，請取消此操作。"

#. translators: help text for 'p' option in the 'Continue?' prompt
#: src/solve-commit.cc:675 src/solve-commit.cc:652
#, fuzzy
msgid ""
"Restart solver in no-force-resolution mode in order to show dependency "
"problems."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"以 no-force-resolution 模式重新啟動解析程式以顯示相依性問題。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"重新以不強迫解決模式啟動解析者，以顯示相依性問題。"

#. translators: help text for 'r' option in the 'Continue?' prompt
#: src/solve-commit.cc:681 src/solve-commit.cc:658
#, fuzzy
msgid ""
"Toggle display of repositories from which the packages will be installed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"切換顯示安裝套件的來源儲存庫。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"切換顯示套件將從哪個套件庫安裝。"

#. translators: help text for 'm' option in the 'Continue?' prompt
#: src/solve-commit.cc:683 src/solve-commit.cc:660
#, fuzzy
msgid "Toggle display of package vendor names."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"切換顯示套件廠商名稱。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"切換顯示套件供應商名稱。"

#. translators: help text for 'd' option in the 'Continue?' prompt
#: src/solve-commit.cc:685 src/solve-commit.cc:662
#, fuzzy
msgid "Toggle between showing all details and as few details as possible."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"在顯示所有詳細資料和顯示最少詳細資料間切換。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"在顯示所有細節和顯示最少細節間切換。"

#. translators: help text for 'g' option in the 'Continue?' prompt
#: src/solve-commit.cc:687 src/solve-commit.cc:664
#, fuzzy
msgid "View the summary in pager."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"在工作區切換程式中檢視摘要。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"在呼叫器中檢視摘要。"

#: src/solve-commit.cc:798 src/solve-commit.cc:774
#, fuzzy
msgid "committing"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"致力於\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"提交"

#: src/solve-commit.cc:800 src/solve-commit.cc:776
#, fuzzy
msgid "(dry run)"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"(dry run)\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"(測試)"

#: src/solve-commit.cc:825 src/solve-commit.cc:868 src/solve-commit.cc:800
#: src/solve-commit.cc:833
#, fuzzy
msgid "Problem retrieving the package file from the repository:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"從儲存庫取回套件檔案時出現問題︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"從套件庫取出套件檔案出現問題："

#. #-#-#-#-#  old (zypper)  #-#-#-#-#
#. translators: the first %s is 'zypper refresh' and the second
#. is repo allias
#. #-#-#-#-#  new (zypper)  #-#-#-#-#
#. translators: the first %s is 'zypper refresh' and the second is repo alias
#: src/solve-commit.cc:864 src/solve-commit.cc:830
#, fuzzy, c-format, boost-format
msgid "Repository '%s' is out of date. Running '%s' might help."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫「%s」已過期。執行「%s」可能會有幫助。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫 '%s' 已過期。執行 '%s' 可能會有幫助。"

#: src/solve-commit.cc:877 src/solve-commit.cc:841
#, fuzzy
msgid ""
"The package integrity check failed. This may be a problem with the "
"repository or media. Try one of the following:\n"
"\n"
"- just retry previous command\n"
"- refresh the repositories using 'zypper refresh'\n"
"- use another installation medium (if e.g. damaged)\n"
"- use another repository"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"套件完整性檢查失敗。儲存庫或媒體可能有問題。請嘗試下列其中一個動作：\n"
"\n"
"- 重試之前的指令\n"
"- 使用 zypper refresh 重新整理儲存庫\n"
"- 使用另一個安裝媒體 (例如媒體損壞時)\n"
"- 使用另一個儲存庫\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件完整性檢查失敗。 套件庫或媒體可能有問題。請嘗試下列其中一個動作：\n"
" \n"
" – 重試之前的指令\n"
" – 使用 'zypper refresh' 重新整理套件庫\n"
" – 使用另一個安裝媒體 (例如媒體損壞時)\n"
" – 使用另一個套件庫"

#: src/solve-commit.cc:899 src/solve-commit.cc:863
#, fuzzy
msgid "Installation has completed with error."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"安裝完成，但存在錯誤。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"安裝已完成，然而有錯誤發生。"

#: src/solve-commit.cc:901 src/solve-commit.cc:865
#, fuzzy, boost-format
msgid "You may run '%1%' to repair any dependency problems."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"您可以執行「%1%」來修復所有相依性問題。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"您可以執行 '%1%' 來修復任何相依性問題。"

#: src/solve-commit.cc:916 src/solve-commit.cc:879
#, fuzzy
msgid ""
"One of installed patches requires reboot of your machine. Reboot as soon as "
"possible."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"其中一個安裝的修補程式需要重新啟動您的機器。請盡快重新啟動電腦。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"其中一個安裝的修補程式需要重新啟動您的機器。 請盡快重新啟動電腦。"

#: src/solve-commit.cc:925 src/solve-commit.cc:887
#, fuzzy
msgid ""
"One of installed patches affects the package manager itself. Run this "
"command once more to install any other needed patches."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"其中一個安裝的修補程式會影響套件管理員本身。請再次執行此指令以安裝其他所需的"
"修補程式。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"其中一個安裝的修補程式會影響套件管理員本身，請再次執行此命令以安裝其他所需的"
"修補程式。"

#. process command name
#: src/ps.cc:123
#, fuzzy
msgid "Command"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"指令\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"命令"

#: src/ps.cc:160
#, fuzzy
msgid "No processes using deleted files found."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未找到使用已刪除檔案的程序。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"未發現使用已刪除檔案的程序。"

#: src/ps.cc:164
#, fuzzy
msgid "The following running processes use deleted files:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"下列執行中的程序使用了刪除的檔案：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"下列執行中的程序使用了被刪除的檔案："

#: src/ps.cc:168
#, fuzzy, c-format, boost-format
msgid ""
"See '%s' for information about the meaning of values in the above table."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"參閱「%s」瞭解關於上表中的數值意義的資訊。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"參閱 '%s' 查看關於上表中的數值意義的資訊。"

#: src/ps.cc:175
#, fuzzy
msgid ""
"Note: Not running as root you are limited to searching for files you have "
"permission to examine with the system stat(2) function. The result might be "
"incomplete."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"注意：如果沒有使用 root 身份執行，則您的搜尋範圍將限制為透過系統狀態 (2) 功能"
"有權檢查的檔案。該結果可能並不完整。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"注意：您沒有使用 root 身分執行，您的搜尋範圍將限制為透過 system stat(2) 功能"
"有權檢視的檔案。結果可能並不完整。"

#: src/source-download.cc:208
#, fuzzy, c-format, boost-format
msgid "Can't create or access download directory '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"無法建立或存取下載目錄「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無法建立或存取下載目錄 '%s'。"

#: src/source-download.cc:222 src/source-download.cc:221
#, fuzzy, c-format, boost-format
msgid "Using download directory at '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在使用「%s」中的下載目錄。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在使用 '%s 1' 中的下載目錄。"

#: src/source-download.cc:287 src/source-download.cc:285
#, fuzzy
msgid "Installed packages:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"已安裝套件︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"已安裝的套件："

#: src/source-download.cc:290 src/source-download.cc:288
#, fuzzy
msgid "Required source packages:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"必要的來源套件︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"所需要的原始碼套件："

#: src/source-download.cc:299 src/source-download.cc:297
#, fuzzy
msgid "Required source packages available in download directory:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"下載目錄中有必要的來源套件︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"下載目錄中有必要的原始碼套件︰"

#: src/source-download.cc:303 src/source-download.cc:301
#, fuzzy
msgid "Required source packages to be downloaded:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"要下載的必要來源套件︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"要下載的必要原始碼套件︰"

#: src/source-download.cc:307 src/source-download.cc:305
#, fuzzy
msgid "Superfluous source packages in download directory:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"下載目錄中的非必要來源套件︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"下載目錄中多餘的原始碼套件︰"

#. translators: table headers
#: src/source-download.cc:321 src/source-download.cc:319
#, fuzzy
msgid "Source package"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"來源套件\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"原始碼套件"

#: src/source-download.cc:321 src/source-download.cc:319
#, fuzzy
msgid "Installed package"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"已安裝套件\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"已安裝的套件"

#: src/source-download.cc:372 src/source-download.cc:370
#, fuzzy
msgid "Use '--verbose' option for a full list of required source packages."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"使用「--verbose」選項列出必要來源套件的完整清單。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"使用 '--verbose' 選項來顯示必需的原始碼套件完整列表。"

#: src/source-download.cc:381 src/source-download.cc:379
#, fuzzy
msgid "Deleting superfluous source packages"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在刪除非必要的來源套件\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在移除多餘的原始碼套件"

#: src/source-download.cc:392 src/source-download.cc:390
#, fuzzy, c-format, boost-format
msgid "Failed to remove source package '%s'"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"移除來源套件「%s」失敗\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"移除原始碼套件 '%s' 失敗"

#: src/source-download.cc:403 src/source-download.cc:401
#, fuzzy
msgid "No superfluous source packages to delete."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"沒有需要刪除的非必要來源套件。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"沒有多餘的原始碼套件可以移除。"

#: src/source-download.cc:413 src/source-download.cc:411
#, fuzzy
msgid "Downloading required source packages..."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在下載必要的來源套件...\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在下載所需要的原始碼套件..."

#: src/source-download.cc:432 src/source-download.cc:430
#, fuzzy, c-format, boost-format
msgid "Source package '%s' is not provided by any repository."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"來源套件「%s」不是由任何儲存庫提供。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"原始碼套件 '%s' 未在任何套件庫中提供 。"

#: src/source-download.cc:451 src/source-download.cc:465
#: src/source-download.cc:449 src/source-download.cc:463
#, fuzzy, c-format, boost-format
msgid "Error downloading source package '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"下載來源套件「%s」時發生錯誤。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"下載原始碼套件 '%s' 發生錯誤。"

#: src/source-download.cc:476 src/source-download.cc:474
#, fuzzy
msgid "No source packages to download."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"沒有要下載的來源套件。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"沒有原始碼套件將被下載。"

#: src/search.cc:482 src/search.cc:408
#, fuzzy
msgid "No patterns found."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"找不到任何模式。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"沒有發現樣式。"

#: src/search.cc:731 src/search.cc:651
#, fuzzy
msgid "No products found."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"找不到產品。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"沒有發現產品。"

#: src/search.cc:755 src/search.cc:675
#, fuzzy, c-format, boost-format
msgid "No providers of '%s' found."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未找到「%s」的提供者。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"找不到 '%s' 的提供者。"

#: src/output/OutNormal.cc:83 src/output/OutNormal.cc:81
#, fuzzy
msgid "Warning: "
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"警告：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"警告︰ "

#: src/output/OutNormal.cc:255 src/output/OutNormal.cc:291
#: src/output/OutNormal.cc:329 src/output/OutNormal.cc:249
#: src/output/OutNormal.cc:283 src/output/OutNormal.cc:321
#, fuzzy
msgid "Retrieving:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"取回︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在取回︰"

#: src/output/OutNormal.cc:262 src/output/OutNormal.cc:256
#, fuzzy
msgid "starting"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"啟動\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"正在啟動"

#. translators: Label text; is followed by ': cmdline argument'
#: src/download.cc:114
#, fuzzy
msgid "Argument resolves to no package"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"引數解析為無套件\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"該參數解析不到套件"

#: src/download.cc:136
#, fuzzy
msgid "No prune to best version."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未縮減為最佳版本。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"不調整為最佳版本。"

#: src/download.cc:142
#, fuzzy
msgid "Prune to best version..."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"縮減為最佳版本...\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"調整為最佳版本..."

#: src/download.cc:148
#, fuzzy
msgid "Not downloading anything..."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未下載任何項目...\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"未下載任何東西..."

#: src/download.cc:190
#, fuzzy, c-format, boost-format
msgid "Error downloading package '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"下載套件「%s」時發生錯誤。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"下載套件 '%s' 發生錯誤。"

#: src/download.cc:204
#, fuzzy, c-format, boost-format
msgid "Not downloading package '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未下載套件「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件 '%s' 未下載。"

#: src/PackageArgs.cc:216 src/PackageArgs.cc:204
#, fuzzy, c-format, boost-format
msgid "'%s' not found in package names. Trying '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"套件名稱中找不到「%s」。正在嘗試「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件名稱中找不到 '%s'。正在嘗試 '%s'。"

#: src/PackageArgs.cc:232 src/PackageArgs.cc:219
#, fuzzy, c-format, boost-format
msgid ""
"Different package type specified in '%s' option and '%s' argument. Will use "
"the latter."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"「%s」選項和「%s」參數中指定了不同的套件類型，將使用後者中的套件。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"'%s' 選項和 '%s' 參數中指定了不同的套件類型，將使用後者。"

#: src/PackageArgs.cc:249 src/PackageArgs.cc:233
#, fuzzy, c-format, boost-format
msgid "'%s' is not a package name or capability."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"「%s」不是有效的套件或功能名稱。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"'%s' 不是一個套件或功能名稱。"

#: src/Zypper.h:449 src/Zypper.h:463
#, fuzzy
msgid "Finished with error."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"已完成，但出現錯誤。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"發生錯誤而結束。"

#. #-#-#-#-#  old (zypper)  #-#-#-#-#
#. translators: the first %s is the name of the package, the second
#. is " (package-type)" if other than "package" (patch/product/pattern)
#. #-#-#-#-#  new (zypper)  #-#-#-#-#
#. introduction
#. translators: the first %s is the name of the package, the second
#. is " (package-type)" if other than "package" (patch/product/pattern)
#: src/misc.cc:181 src/misc.cc:153
#, fuzzy, c-format, boost-format
msgid ""
"In order to install '%s'%s, you must agree to terms of the following license "
"agreement:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"若要安裝「%s」%s，必須同意以下授權合約的條款︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"要安裝 '%s' %s，您必須接受下述授權條款︰"

#. lincense prompt
#: src/misc.cc:196 src/misc.cc:167
#, fuzzy
msgid "Do you agree with the terms of the license?"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"是否同意授權條款？\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"您同意接受以上的授權條款嗎？"

#. #-#-#-#-#  old (zypper)  #-#-#-#-#
#. translators: %sanslate the '--auto-agree-with-licenses',
#. it is a command line option
#. #-#-#-#-#  new (zypper)  #-#-#-#-#
#. translators: %s is '--auto-agree-with-licenses'
#: src/misc.cc:210 src/misc.cc:178
#, fuzzy, c-format, boost-format
msgid ""
"Please restart the operation in interactive mode and confirm your agreement "
"with required licenses, or use the %s option."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請在互動模式中重新啟動操作，並確認您同意所需的授權合約，或使用 %s 選項。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"請在互動模式中重新啟動作業，並確認您同意所需的授權合約，或使用 %s 的選項。"

#: src/misc.cc:284 src/misc.cc:244
#, fuzzy
msgid "EULA"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"EULA\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"終端使用者授權協議 (EULA)"

#: src/misc.cc:298 src/misc.cc:258
#, fuzzy, c-format, boost-format
msgid "Installed packages with counterparts in repositories: %d"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"儲存庫中存在對應部分的已安裝套件︰%d\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件庫中存在相依項的已安裝套件︰%d"

#: src/misc.cc:299 src/misc.cc:259
#, fuzzy, c-format, boost-format
msgid "Installed packages with EULAs: %d"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"安裝套件和 EULA︰%d\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"帶有 EULA 的已安裝套件：%d"

#: src/misc.cc:329 src/misc.cc:289
#, fuzzy, c-format, boost-format
msgid "Package '%s' has source package '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"套件「%s」有來源套件「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"套件 '%s' 有原始碼套件 '%s'。"

#: src/misc.cc:335 src/misc.cc:295
#, fuzzy, c-format, boost-format
msgid "Source package '%s' for package '%s' not found."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"套件「%s」的來源套件「%s」找不到。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"原始碼套件 '%s' (針對套件 '%s') 找不到。"

#: src/misc.cc:428 src/misc.cc:382
#, fuzzy, c-format, boost-format
msgid "Source package %s-%s successfully retrieved."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"已成功取回來源套件 %s-%s。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"原始碼套件 %s-%s 已成功取得。"

#: src/misc.cc:444 src/misc.cc:394
#, fuzzy, c-format, boost-format
msgid "Problem installing source package %s-%s:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"安裝來源套件 %s-%s 時發生問題：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"安裝來源套件 %s-%s 發生問題："

#. translators: locks table value
#: src/locks.cc:26 src/locks.cc:125
#, fuzzy
msgid "(multiple)"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"(多個)\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"(多重)"

#. translators: property name; short; used like "Name: value"
#: src/locks.cc:72
#, fuzzy
msgid "Keep installed"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"繼續安裝\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"保持已安裝"

#: src/locks.cc:106
#, fuzzy
msgid "Matches"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"相符\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"符合"

#: src/locks.cc:159
#, fuzzy
msgid "There are no package locks defined."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未定義套件鎖定。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"沒有定義任何套件鎖定。"

#: src/locks.cc:166
#, fuzzy
msgid "Error reading the locks file:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"讀取鎖定檔案時出錯︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"讀取鎖定檔案發生錯誤："

#: src/locks.cc:233
#, fuzzy
msgid "Problem adding the package lock:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"新增套件鎖定時出現問題︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"加入套件鎖定發生問題："

#: src/locks.cc:257
#, fuzzy
msgid "Specified lock has been successfully removed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"已成功移除指定的鎖定。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"指定的鎖定已成功移除。"

#: src/locks.cc:302
#, fuzzy
msgid "No lock has been removed."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未移除任何鎖定。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"沒有鎖定被移除。"

#: src/locks.cc:313
#, fuzzy
msgid "Problem removing the package lock:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"移除套件鎖定時出現問題︰\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"移除套件鎖定發生問題："

#: src/utils/messages.cc:60 src/utils/messages.cc:56
#, fuzzy, c-format, boost-format
msgid "The '--%s' option has currently no effect."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"選項「--%s」目前沒有作用。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"選項 '--%s' 目前沒有作用。"

#: src/utils/messages.cc:78 src/utils/messages.cc:74
#, fuzzy, c-format, boost-format
msgid ""
"You have chosen to ignore a problem with download or installation of a "
"package which might lead to broken dependencies of other packages. It is "
"recommended to run '%s' after the operation has finished."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"您已選擇忽略下載或安裝套件時出現的問題，此問題可能會導致其他套件的相依性遭到"
"破壞。建議您在完成操作後執行「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"您已經選擇去忽略套件下載或安裝的問題，這可能導致其他套件的相依性被破壞。建議"
"您在此操作完成後執行 '%s' 命令。"

#: src/utils/pager.cc:36 src/utils/pager.cc:32
#, fuzzy, c-format, boost-format
msgid "Press '%c' to exit the pager."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請按「%c」結束工作區切換程式。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"按 '%c' 以退出呼叫器。"

#: src/utils/pager.cc:46 src/utils/pager.cc:42
#, fuzzy
msgid "Use arrows or pgUp/pgDown keys to scroll the text by lines or pages."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請使用箭頭鍵或 PgUp/PgDown 鍵按行或按頁捲動文字。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"使用箭頭或 pgUp/pgDown 按鍵以一行一行或一頁一頁捲動文字。"

#: src/utils/pager.cc:48 src/utils/pager.cc:44
#, fuzzy
msgid "Use the Enter or Space key to scroll the text by lines or pages."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"請使用 Enter 鍵或空白鍵按行或按頁捲動文字。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"使用 Enter 或空白鍵來一行一行或一頁一頁捲動文字。"

#: src/utils/Augeas.cc:26
#, fuzzy
msgid "Cannot initialize configuration file parser."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"無法啟始化組態檔剖析器。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無法初始化組態檔案分析器。"

#: src/utils/Augeas.cc:64
#, fuzzy
msgid "Could not parse the config files."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"無法剖析組態檔。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無法剖析設定檔。"

#: src/utils/Augeas.cc:98 src/utils/Augeas.cc:99
#, fuzzy
msgid "Error parsing zypper.conf:"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"剖析 zypper.conf 時出錯：\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"剖析 zypper.conf 時發生錯誤："

#. For '-garbage' argument, with 'a', 'b', and 'e' as known options,
#. getopt_long reports 'a', 'b', and 'e' as known options.
#. The rest ends here and it is either the last one from previous argument
#. (short_pos + 1 points to it), or the short_pos one from the current
#. argument. (bnc #299375)
#. wrong option in the last argument
#: src/utils/getopt.cc:72 src/utils/getopt.cc:78
#, fuzzy
msgid "Unknown option "
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未知選項\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"未知選項 "

#: src/utils/getopt.cc:92 src/utils/getopt.cc:98
#, fuzzy
msgid "Missing argument for "
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"遺失引數\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"遺失引數 "

#: src/utils/prompt.cc:238 src/utils/prompt.cc:217
#, fuzzy
msgid "Trying again..."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"正在重新嘗試...\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"再次嘗試中..."

#: src/utils/prompt.cc:336 src/utils/prompt.cc:321
#, fuzzy, c-format, boost-format
msgid "Invalid answer '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"無效的答案「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無效的答案 '%s'。"

#. translators: the %s are: 'y', 'yes' (translated), 'n', and 'no' (translated).
#: src/utils/prompt.cc:342 src/utils/prompt.cc:326
#, fuzzy, c-format, boost-format
msgid "Enter '%s' for '%s' or '%s' for '%s' if nothing else works for you."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"如果沒有可用的答案，輸入「%s」表示「%s」或「%s」表示「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"如果沒有可用的答案，輸入 '%s' 表示 '%s' 或 '%s' 表示 '%s' 。"

#: src/utils/prompt.cc:356 src/utils/prompt.cc:289
#, fuzzy, c-format, boost-format
msgid ""
"If you run zypper without a terminal, use '%s' global\n"
"option to make zypper use default answers to prompts."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"如果您並非使用終端機執行 zypper ，使用 %s 全域選項\n"
"讓 zypper 對提示使用預設的答案。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"如果您並非使用終端機執行 zypper ，使用 '%s' 全域選項\n"
"讓 zypper 對提示使用預設的答案。"

#: src/utils/misc.cc:212 src/utils/misc.cc:379
#, fuzzy
msgid "Given URI is invalid"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"指定的 URI 無效\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"指定的位址無效"

#: src/utils/misc.cc:333 src/utils/misc.cc:507
#, fuzzy
msgid "Invalid OBS URI."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"OBS URI 無效。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"無效的 OBS 位址。"

#: src/utils/misc.cc:511 src/utils/misc.cc:686
#, fuzzy, c-format, boost-format
msgid "Unknown download mode '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"未知的下載模式「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"未知的下載模式 '%s'。"

#: src/utils/misc.cc:512 src/utils/misc.cc:687
#, fuzzy, c-format, boost-format
msgid "Available download modes: %s"
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"可用下載模式︰%s\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"可用的下載模式︰%s"

#: src/utils/misc.cc:526 src/utils/misc.cc:701
#, fuzzy, c-format, boost-format
msgid "Option '%s' overrides '%s'."
msgstr ""
"#-#-#-#-#  old (zypper)  #-#-#-#-#\n"
"選項「%s」會覆寫「%s」。\n"
"#-#-#-#-#  new (zypper)  #-#-#-#-#\n"
"選項 '%s' 會覆蓋 '%s'。"